Laptop Survey / FreeBSD All
[Prev][379][Next]
Name : Shinichi Oshiro (oshiro@ofug.net)
Date : 2000/12/21
Machine : LibrettoSS1000CTA (CPU Pentium/P55C (quarter-micron)
(166.63-MHz 586-class CPU), HDD 2GB, RAM 32MB)
FreeBSD : OK (3.5-STABLE#0)
Pccard Pkg: PAO3-20001021
APM BIOS : OK (1.2)
Config Opt: device pcm0 at isa? port 0x530 tty irq 5 drq 1 vector
pcmintr
PCIC : TOSHIBA TOPIC97
Cards :
- Telecom Device K.K. SuperSocket RE550T (ed0 Ethernet Card)
- IO DATA PCLATE (ed0 Ethernet Card)
Misc Info :
Graphic Chip is NeoMagic NM2097.
XF86_SVGA server of XFree86 3.3.5 worked at SVGA 16bit color.
sound worked pcm0 driver.
[Prev][378][Next]
Name : seinosuke kaneda (kk98010@isbs.kiu.ac.jp)
Date : 2000/12/20
Machine : SHARP PC-PJ100S (CPU mobile Celeron450MHz, HDD 12GB, RAM
64MB)
FreeBSD : OK (4.2Release)
APM BIOS : OK (1.2)
PCIC : TI PCI-1410 PCI-CardBus Bridge
Cards :
- Melco LPC2-TX
- 3Com EtherlinkIII 3C589D
- maxell PCCARD-ADAPTER
- LogitGec LZD-PCM3
- Adaptec APA-1460
NG-Cards :
- Melco LPC3-TX
[Prev][377][Next]
Name : Masaru YOKOI (myokoi@geocities.co.jp)
Date : 2000/12/16
Machine : IBM ThinkPad 240 (2609) (CPU Celeron 400, HDD 12G, RAM
192MB)
FreeBSD : Please see MISC information (FreeBSD 4.2-RELEASE)
APM BIOS : OK
PCIC : TI PCI-1211 PCI-CardBus Bridge
Cards :
- CyQ've ELA-110 10/100M LAN Card
card "CyQ've" "ELA-110 10/100M LAN Card"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
- OMRON Modem ME5614CL
card "OMRON" "Modem ME5614CL"
config auto "sio" ?
- IDO C081-PacketOne Card
card "IDO" "C081-PacketOne Card"
- SII (DDI Pocket) MC-200
Misc Info :
When in this situation, pcic will not be proved.
* "Modem for Legacy OS" is enabled in BIOS configuration.
* "Serial port A" is disabled in BIOS configuration.
And I modified kernel configuration for pcic.
| device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
[Prev][376][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/11/19
Machine : FUJITSU FMV 5120 NA/W (CPU Pentium 120MHz, HDD 2GB, RAM
24MB)
FreeBSD : OK (3.5.1-RELEASE)
Pccard Pkg: PAO3-20000710
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6710
Cards :
- ELECOM Laneed LD-CDY
Misc Info :
- XF86_SVGA of XFree86 3.3.6 worked at SVGA 8bit color.
- HDD was exchanged to FUJITSU MHA2021AT.
- HDD was not recognized by wd0 driver of FreeBSD 4.1-RELEASE.
[Prev][375][Next]
Name : Ikumi Keita
Date : 2000/11/01
Machine : DynaBook 2140 K45/2C8 (CPU AMD K6-2 (MMX) 450MHz, HDD 6GB,
RAM 64MB)
FreeBSD : OK (3.5.1-RELEASE)
Pccard Pkg: PAO3-20000710
APM BIOS : MAXMEM="(63*1024)" & BIOS CONFIG `Power-up Mode ->
Resume, Panel Power On/Off -> Enabled' required (1.2)
Cards :
- TDK Global Networker 3410
io 0x240-0x2e0 0x3e0-0x3ff
ignirq 1 2 3 4 5 6 7 11 14 15
memory 0xc0000 96k
- 3Com EtherLink III 3C589D-COMBO
[Prev][374][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/10/26
Machine : FMV-BIBLO LIFEBOOK 645MC6C/W / FMV6MCGTL6 (CPU Mobile
Celeron 450MHz, HDD 6GB, RAM 128MB)
FreeBSD : OK (4.1-RELEASE)
PCIC : TI PCI-1410 PCI-CardBus Bridge
Misc Info :
- Graphic Chip is Trident Cyber 9525DVD.
XF86_SVGA server of XFree86 3.3.6 worked at SVGA 16bit color.
- NIC, Intel Pro 10/100B/100+ Ethernet, worked with fxp0 driver.
[Prev][373][Next]
Name : Tatsuya TANIKAWA (Tatsuya-t@sannet.ne.jp)
Date : 2000/10/23
Machine : SONY VAIO NOTE PCG-767 (CPU Pentium/P55C 264MHz, HDD
11513MB / FUJITSU MHK2120AT, RAM 128MB)
FreeBSD : OK (3.5.1-RELEASE)
Pccard Pkg: PAO3-20001021
APM BIOS : OK (1.2)
Config Opt: PCIC_RESUME_RESET ATAPI_DETACH
PCIC : Ricoh RL5C478 [CardBus bridge mode]
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460J
- D-link DE-650 Ethernet Card
- MELCO LPC2-T Ethernet Card
- Microtech XpressDock
config default "wdc2" any 0x20000
cardio 0x340 0x10
[Prev][372][Next]
Name : NUMATA Toshinori (numa@rp.open.cs.fujitsu.co.jp)
Date : 2000/10/13
Machine : Fujitsu FMV-BIBLO MC3/45 (CPU Mobile Celeron 450MHz, HDD
9GB, RAM 192MB)
FreeBSD : OK (3.5.1-RELEASE)
Pccard Pkg: PAO-20000710
APM BIOS : NG (1.2)
PCIC :
Texas Instruments PCI-1410 CardBus Controller
[Intel 82365DF compatible mode]
Cards :
- ELECOM Laneed LD-10/100CD (Fast Ethernet Card)
- PIONEER PCP-PR24W (CD-ROM Drive with SCSI-2 Interface Card)
- IO DATA MOF-1300/CBSC (MO Disk Drive with SCSI-2 Interface Card)
The following lines are added to /etc/pccard.conf:
# IO DATA CBSC-II (16-bit mode)
card "IO DATA" "CBSC16" "1"
config auto "nsp0" any #default
insert logger -s "CBSC16 inserted"
#device_id:(0x00)
remove logger -s "CBSC16 removed"
Misc Info :
The display controller chip is Trident Cyber 9525 DVD, which requires
XFree86 4.0 to run X Window System. I've installed XFree86-Server-4.0
and XFree86-clients-4.0 packages from BSDi 3.5.1-RELEASE CD-ROM set,
and configured with HorizSync of 31.5-37.9 MHz and VertRefresh of
50-70 Hz.
Laneed LD-10/100CD only runs in 10BaseT mode even with 100BaseTX hub,
as others report.
The SCSI PC-Card used by PIONEER PCP-PR24W CD-ROM Drive seems to be
an OEM of IO DATA PCSC-F (its device driver for Windows is named as
"PCSC-F UltraSMIT PCMCIA SCSI Card for DOS/V"), which can be handled by
"nsp" device driver.
The SCSI PC-Card accompanied with MOF-1300/CBSC is CBSC-II. It has two
operating modes: CardBus mode and 16-bit mode. There is a switch on the
side of the card to select the mode, and it must be set to 16-bit mode
for use in FreeBSD.
The built-in modem is a WinModem, and will not work.
[Prev][371][Next]
Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp)
Date : 2000/10/11
Machine : ThinkPad X20 (2662 34J) (CPU Mobile Pentium III 600MHz
SpeadStepTech LV, HDD 20GB, RAM 128MB)
FreeBSD : OK (4.1.1-RELEASE)
Pccard Pkg: None
APM BIOS : OK (APM 1.2)
PCIC : Ricoh RL5C476 PCI-CardBus Bridge
Misc Info :
GENERIC kernel can't attach pcic0 to pcic-pci0 correctly.
If I inserted any card, then kernel has freezed.
So, I rebuild kernel with follow line:
device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
Then, I can use PCCARD.
NOTE: I tried "polling mode", but it didn't work.
[Prev][370][Next]
Name : Yukihisa Tago (y-tago@mxa.mesh.ne.jp)
Date : 2000/10/11
Machine : PC-9821La13/S14 (CPU Pentium/P54C 133MHz, HDD 1378MB, RAM
640KB + 48MB)
FreeBSD : OK (FreeBSD(98)3.4R-Rev01)
Pccard Pkg: PAO3-20000624-pc98-20000712
APM BIOS : OK (APM BIOS version 1.11)
PCIC : Cirrus Logic PD672X
Cards :
- NEC Aterm IC20
- NEC PC-9801N-J12
- NTT DoCoMo Mobile Card P-in
- KME KXLC003
card "KME" "KXLC003"
config 0x26 "ncv0" any 0xb4d00001
insert logger -s KME SCSI PCMCIA Card inserted
remove logger -s KME SCSI PCMCIA Card removed
- TDK FCD128N
- IBM microdrive
NG-Cards :
- NEC PC-9801N-J03R
[Prev][369][Next]
Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp)
Date : 2000/10/04
Machine : ThinkPad X20 (2662 34J) (CPU Mobile Pentium III 600MHz
SpeadStepTech LV, HDD 20GB, RAM 128MB)
FreeBSD : OK (3.5-RELEASE)
Pccard Pkg: PAO-20000710
APM BIOS : OK (APM 1.2)
PCIC : Ricoh RL5C475/476 [CardBus bridge mode]
Cards :
- Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem)
card "Xircom" "CreditCard Ethernet"
config 0x27 "sio2" any
insert echo Xircom CEM56 Card inserted as Modem
remove echo Xircom CEM56 Card removed
- Xircom CreditCard Ethernet 10/100+ Modem 56 (as ether)
card "Xircom" "CreditCard Ethernet"
config 0x27 "xe0" any
insert logger -s Xircom CEM56 Card inserted as Ether
remove logger -s Xircom CEM56 Card removed
Misc Info :
Inner ether card [Intel EtherExpress Pro 10/100B Ethernet] has attached
fxp driver with out PAO package.
but inner modem [Xircom MPCI+ Modem 56 WinGlobal] and Sound card
[Crystal SoundFusion CS4281 WDM Audio] has not attached any driver.
[Prev][368][Next]
Name : ABE Masayuki (abe@po.ntts.co.jp)
Date : 2000/09/13
Machine : IBM PC110 (CPU 486SX, HDD 128MB CF, RAM 20MB)
FreeBSD : OK (2.2.8-STABLE)
Pccard Pkg: PAO-19990405
APM BIOS : OK (1.0)
PCIC : Ricoh RF5C396
Cards :
- 3com 3c589d
[Prev][367][Next]
Name : Yoichi ASAI (yatt@msc.biglobe.ne.jp)
Date : 2000/09/03
Machine : IBM ThinkPad i Series 1124 (formerly called "ThinkPad
240") (CPU Mobile Celeron 450MHz, HDD 12GB, RAM 192MB)
FreeBSD : OK (3.5.1-RELEASE)
Pccard Pkg: PAO3-20000710
APM BIOS : OK (1.2)
PCIC : Intel 82365DF
Cards :
- corega EtherII PCC-T
- PCMCIA UE2212 aka MELCO LPC-TN
- Allied Telesis CentreCOM LA-PCM V2
Misc Info :
PCIC Intel 82365DF does not work with FreeBSD 4.1-RELEASE.
XFree86 3.3.6 works with XF86_SVGA server, config "SMI LynxEM+ (generic)".
Sound chip "Crystal CS4281" works with 4front-tech's OSS driver.
Internal modem does not work, for it is a "Winmodem".
[Prev][366][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/08/21
Machine : COMPAQ Armada M700 / ML6500/14/NT 4.0 (CPU Mobile Pentium
III 500MHz, HDD 12GB, RAM 320MB)
FreeBSD : OK (4.1-RELEASE)
APM BIOS : OK (1.2)
Misc Info :
o Graphic Chip is ATI RAGE Mobility P.
XF86_Mach64 server of XFree86 3.3.6 worked at XGA 24bit color.
o NIC is Intel EtherExpress Pro 10/100B Ethernet.
It worked with fxp0 driver.
[Prev][365][Next]
Name : Atushi Sakauchi (sakauchi@yamame.to)
Date : 2000/08/05
Machine : SONY VAIO Z505S (CPU Celeron 333MHz, HDD 12GB, RAM 192MB)
FreeBSD : OK (4.1-STABLE)
APM BIOS : OK (1.2)
Config Opt: device pcm
PCIC : Ricoh RL5C475 PCI-CardBus Bridge
Cards :
- SONY PCGA-CDR51 CD-R ( Recovery mode )
- ADTEC AD-SMADP PC CARD ADAPTER for SmartMedia
- NTT DoCoMo Mobile Card P-in
- Adaptec SlimSCSI APA-1460A
[Prev][364][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/08/04
Machine : NEC PC-9821 VersaPro NX VP23C/WXmodel AA1 (CPU MMX Pentium
233MHz, HDD 12GB, RAM 128MB)
FreeBSD : OK (4.1-RELEASE)
APM BIOS : OK (1.2)
Cards :
- corega Ether II PCC-T
Misc Info :
o Graphic Chip is Trident Cyber9385-1.
XF86_SVGA server of XFree86 3.3.6 worked at SVGA 16bit color,
if Option "noaccel" and VideoRam 2048
are added in Section "Device" of XF86Config file.
o If the machine is suspended as X server runs, it hungs up.
It can be suspended as Xserver doesn't run.
o HDD was exchanged to TOSHIBA MK1214GAP.
o NIC is corega Ether II PCC-T.
It worked with ed1 driver.
[Prev][363][Next]
Name : Tywon Muckler
Date : 2000/07/17
Machine : Toshiba 2675DVD (CPU Pentium 3 450MHz, HDD 6GB 4xDVD, RAM
96MB)
FreeBSD : OK (3.5-RELEASE)
Cards :
- D-LINK DFE-650 Ethernet card
Misc Info : Dual booting Windows 98 SE and FreeBSD
[Prev][362][Next]
Name : Taku Okuno (liber@rr.iij4u.or.jp)
Date : 2000/07/07
Machine : Panasonic Let's note CF-B5V (CPU Mobile Celeron 500MHz,
HDD 9590MB, RAM 64M)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365DF
Cards :
- TDK DP9628 (sio)
[Prev][361][Next]
Name : Takenori Kobayashi (tk.kobayashi@3si.co.jp)
Date : 2000/07/04
Machine : Panasonic Let's note CF-S51VJ8 (CPU Intel Mobile Celeron
300Mhz, HDD 8.1GB (Not default), RAM 128MB)
FreeBSD : OK (4.0-RELEASE)
APM BIOS : OK (1.2)
Config Opt:
device pcm
device fxp
PCIC : Ricoh RL5C475 PCI-CardBus Bridge
[Prev][360][Next]
Name : Tatsuya TANIKAWA (tatsuya-t@sannet.ne.jp)
Date : 2000/07/01
Machine : TOSHIBA DynaBook SS-R575 (CPU Pentium/P54C 75MHz, HDD
2067MB / TOSHIBA MK2103MAV, RAM 40MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO-20000130
APM BIOS : OK (1.0 compatible mode)
Config Opt: PCIC_RESUME_RESET ATAPI_DETACH
PCIC : Intel 82365A/B (or clones)
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460J
- D-link DE-650 Ethernet Card
- MELCO LPC2-T Ethernet Card
- Microtech XpressDock
[Prev][359][Next]
Name : Tatsuya TANIKAWA (Tatsuya-t@sannet.ne.jp)
Date : 2000/07/01
Machine : SONY VAIO NOTE PCG-767 (CPU Pentium/P55C 264MHz, HDD
3909MB / FUJITSU MHC2040AT, RAM 128MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO-20000130
APM BIOS : OK (1.2)
Config Opt: PCIC_RESUME_RESET ATAPI_DETACH
PCIC : Ricoh RL5C478 [CardBus bridge mode]
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460J
- D-link DE-650 Ethernet Card
- MELCO LPC2-T Ethernet Card
[Prev][358][Next]
Name : taro Miura (violataro@bigfoot.com)
Date : 2000/05/30
Machine : NEC LaVie NX LW26H/6 (CPU Mobile Celeron 266MHz, HDD
6194MB, RAM 64MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (v1.2)
Config Opt:
device pcic0 at isa? port 0x3e0 irq 10
device pcic0 at isa? port 0x3e4 irq 10
PCIC : TI PCI-1221 [CardBus bridge mode] (5 mem & 2 I/O windows)
Cards :
- MELCO LPC2-T (ed)
- MELCO LPC3-TX (ed)
- Allied Telesis LA-PCM (ed)
- NTT DoCoMo Paldio 611S (sio)
- NTT DoCoMo Mobile Card P-in (sio)
[Prev][357][Next]
Name : IRYO Takamasa
Date : 2000/06/09
Machine : Panasonic Let's Note CF-A1ER (CPU Intel Celeron 400MHz,
HDD 6GB, RAM 128MB)
FreeBSD : OK (4.0-RELEASE)
APM BIOS : OK (1.2)
Cards :
- Megahertz 56k PC Card Modem XJ1560J
[Prev][356][Next]
Name : Heiner Strauss (hstrauss@bilch.com)
Date : 2000/05/31
Machine : IBM ThinkPad i Series 1400 (CPU Celeron (399.06-MHz
686-class CPU), HDD 4645MB, RAM 167772160K bytes)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-2000130
APM BIOS : OK (1.2)
Config Opt: options VM86
PCIC : Intel 82365DF
Cards :
- 3Com Megahertz 3CCFE574BT
Misc Info :
X11R6 3.3.6 + patch works with ATI Rage Mobility in 800x600, No
sound
[Prev][355][Next]
Name : YOSHIMURA Hideaki (kossetsu@fmp.gr.jp)
Date : 2000/05/24
Machine : Panasonic Let's Note CF-L1A (CPU Mobile Celeron 400MHz,
HDD 6GB, RAM 192MB)
FreeBSD : Can't boot from floppy disk, El torito CD-ROM required
(FreeBSD-current (22 Apr 2000 01:30))
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C475
Cards :
- Allied Telesis LA100-PCM-T V2 (Fast Ethernet)
Misc Info :
Can't use (USB-)FDD, displayed as follows:
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
Can't use internal modem because It isn't detected. It seems a software modem.
Can't use built-in audio. There is no driver.
[Prev][354][Next]
Name : Hiromasa Baba (hiromasa@yk.rim.or.jp)
Date : 2000/05/22
Machine : Akia Tornado 513M (CPU Pentium 133MHz, HDD 1.3GB, RAM 32MB)
FreeBSD : OK (FreeBSD 4.0-Release)
Pccard Pkg: within
APM BIOS : OK (1.1)
PCIC : 02micro OZ6729 PC-Card Bridge
Cards :
- TDK 33.6 Kbps FAX/Data Modem
card "TDK" "DF3314E DATA/FAX MODEM"
config 0x23 "sio3" 9
insert echo TDK DF3314E DATA/FAX MODEM inserted
remove echo TDK DF3314E DATA/FAX MODEM removed
- OLYMPUS PC Card Reader for Smart Media Card
card "OLYMPUS" "PAN "
config 0x01 "ata0" ?
insert echo OLYMPUS PC-Card Reader for Smart Media inserted
remove echo OLYMPUS PC-Card Reader for Smart Media removed
[Prev][353][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/05/15
Machine : NEC PC-9821 VersaPro NX VP23C/WXmodel AA1 (CPU MMX Pentium
233MHz, HDD 12GB, RAM 128MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Cards :
- corega Ether II PCC-T
Misc Info :
o Graphic Chip is Trident Cyber9385-1.
XF86_SVGA server of XFree86 Ver. 3.3.5 worked at SVGA 16bit color,
if Option "noaccel" and VideoRam 2048
are added in Section "Device" of XF86Config file.
o If the machine is suspended as X server runs, it hungs up.
It can be suspended as Xserver doesn't run.
o HDD was exchanged to TOSHIBA MK1214GAP.
[Prev][352][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/05/15
Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium
200MHz, HDD 6GB, RAM 96MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Cards :
- ELECOM Laneed LD-CDY
Misc Info :
o Graphic Chip is NeoMagic MagicGraphic 128XD.
XF86_SVGA server of XFree86 Ver. 3.3.5 worked at SVGA 16bit color.
o HDD was exchanged to HITACHI_DK23AA-60 (BUFFALO DVN-6GX).
[Prev][351][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/05/15
Machine : COMPAQ Armada M700 / ML6500/14/NT 4.0 (CPU Mobile Pentium
III 500MHz, HDD 12GB, RAM 320MB)
FreeBSD : OK (4.0-RELEASE)
APM BIOS : OK (1.2)
Misc Info :
o Graphic Chip is ATI RAGE Mobility P.
XF86_Mach64 server of XFree86 Ver. 3.3.6 worked at XGA 24bit color,
although that of Ver. 3.3.5 didn't.
o NIC is Intel EtherExpress Pro 10/100B Ethernet.
It worked with fxp0 driver.
[Prev][350][Next]
Name : Yasuhie CANADA (xicanada@vc-net.ne.jp)
Date : 2000/04/13
Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium
200MHz, HDD 1GB, RAM 96MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK
Cards :
- 3 Com EtherLinkIII 3C589D
[Prev][349][Next]
Name : Yasuhie CANADA (xicanada@vc-net.ne.jp)
Date : 2000/04/13
Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium
200MHz, HDD 1GB, RAM 96MB)
FreeBSD : OK (3.2-RELEASE)
Pccard Pkg: PAO3-19990605
APM BIOS : OK
Cards :
- ELECOM Laneed LD-CDY
[Prev][348][Next]
Name : Satoshi Kimura (KFB03633@nifty.ne.jp)
Date : 2000/03/27
Machine : Toshiba Libretto ff 1100 CT (CPU Intel Pentium/P55C
(quarter-micron) 266MHz, HDD 3.2GB, RAM 64MB)
FreeBSD : OK (FreeBSD 3.4R)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Config Opt: device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0
PCIC : Toshiba ToPIC97 PCI-CardBus Bridge rev 0x07
Cards :
- I-O DATA PCET/TX Fast Ethernet LAN Card
- I-O DATA PCLA/TE Ethernet LAN Card
[Prev][347][Next]
Name : Tohru Kobayashi
Date : 2000/04/08
Machine : HITACHI FLORA Prius note 20M (204T36M) (CPU Intel Celeron
366MHz, HDD 6GB, RAM 64MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O
windows)
Cards :
- CyQve Technology FMC-561 FAX/MODEM CARD
- NTT Personal DC-1P
- FUJIFILM PC-AD3 smart media adapter
- corega Ether PCC-T
[Prev][346][Next]
Name : Kai Baesler (baska@lanparty.de)
Date : 2000/04/08
Machine : IBM ThinkPad 380D (Model.No.:2635-3A0) (CPU Intel Pentium
MMX 150MHz, HDD 2GB, RAM 48MB)
FreeBSD : OK, No Problem (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK, No Problem (1.2)
PCIC : Cirrus Logic PD6729/6730
Cards :
- 3Com Corporation ("3C589D") [TP/BNC LAN Card Ver. 2a]
- SunDisk ("SDP")
- IBM ("PCMCIA 33.6 Kbps International Data-Fax Modem")
Misc Info :
Graphic Chip is NeoMagic 128ZV (NM2093), XFree 3.3.5 worked at 800x600(16bit)
Sound Chip is Crystal CS423x, it works with OSS/FreeBSD
More BIOS Information:
- Power Managment Version: 1.18
- POST/BIOS version: 1.18
- Video Version 1.32
Parallel Port ZIP-Drive works just fine
Parallel Port Webcam (Connectix QuickCam) works fine
Infrared Hardware disabled in Bios to save Interrupts
PCMCIA-Slots of the Port-Replicator do not work when Laptop is docked, but i did'nt really try it...
[Prev][345][Next]
Name : Kei Sugano (siesta@mvd.biglobe.ne.jp)
Date : 2000/04/06
Machine : SONY VAIO PCG-Z505N/BP (CPU CPU Mobile Pentium III 450MHz,
HDD 8.1G (4G for Windows2000, 4G for FreeBSD), RAM 64MB)
FreeBSD : OK (3.4)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Config Opt: none
PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O
windows)
Cards :
- Ninja-ATA CDROM (PCGA-CD51)
- TDK DF3314E DATE/FAX MODEM
- NTT DoCoMo PALDIO 611S
Misc Info :
NIC : OK (fxp)
Hibernation/Suspend : OK(?)
[Prev][344][Next]
Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp)
Date : 2000/04/02
Machine : ThinkPad600 (2645-41U) (CPU PentiumII 233MHz, HDD 3.2GB,
RAM 96MB)
FreeBSD : Need to reduce memory under 64MB to install (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1250
Cards :
- 3Com 3C589C
- NTT-DoCoMo Paldio 611S
[Prev][343][Next]
Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp)
Date : 2000/04/02
Machine : Hewlett Packard OmniBook900 (CPU PentiumII 366MHz, HDD
6.4GB, RAM 96MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1225
Cards :
- 3Com 3C589C
- IO DATA CBIDE2
- NTT-DoCoMo Paldio 611S
[Prev][342][Next]
Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp)
Date : 2000/04/02
Machine : ThinkPad600E (2645-8BJ) (CPU PentiumII 400MHz, HDD 10GB,
RAM 128MB)
FreeBSD : Need to reduce memory under 64MB to install (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1250
Cards :
- IBM PCMCIA Ethernet II
[Prev][341][Next]
Name : MIYASHITA Kensuke (miyasita@ee.ous.ac.jp)
Date : 2000/03/27
Machine : FMV-5100NC/S (CPU Pentium 100MHz, HDD 3GB, RAM 16MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C465 PCI-CardBus Bridge
Cards :
- FMV-J182
[Prev][340][Next]
Name : T.Katayama (valcyrie@hi-ho.ne.jp)
Date : 2000/03/22
Machine : SONY VAIO PCG-N505EL (CPU Intel MobileCeleron300MHz, HDD
6.4GB, RAM 64MB(+64MB))
FreeBSD : OK (3.2-RELEASE)
Pccard Pkg: PAO3-19991011
APM BIOS : OK (1.2)
Config Opt: none
PCIC : Richo RL5C475
Cards :
- Cy'Qube ELA-110 (ed0 FastEthenetCard)
- Corega EtherPCC-T (ed0 EthenetCard)
- MELCO WLI-PCM (ux0 WirelessEthenetCard)
[Prev][339][Next]
Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp)
Date : 2000/03/21
Machine : DELL Inspiron 3500 (TS30T) (CPU Intel Celeron 300MHz, HDD
4.2GB, RAM 64MB)
FreeBSD : OK (with PAO-kern-20000227.flp and
PAO-mfsroot-20000218.flp) (FreeBSD 3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1220
Cards :
- TDK CD-021AX
[Prev][338][Next]
Name : YOSHIMURA Hideaki (kossetsu@a1.mbn.or.jp)
Date : 2000/03/21
Machine : Panasonic Let's Note CF-L1A (CPU Mobile Celeron 400MHz,
HDD 6GB, RAM 192MB)
FreeBSD : Can's boot from floppy disk, El torito CD-ROM required
(FreeBSD 3.3-RELEASE)
Pccard Pkg: PAO3-19991011
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C475
Cards :
- Allied Telesis LA100-PCM-T V2 (Fast Ethernet)
- ASTEL 32kbps Data card XN-11 (PHS I/F)
Misc Info :
Can't use (USB-)FDD, displayed as follows:
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
Can't use internal modem because It isn't detected. It seems a software modem.
Can't use built-in audio CODEC because It isn't detected. W!ndows says "Crystal WDM Codec".
[Prev][337][Next]
Name : Kenji Yamada (kyamada@isi.edu)
Date : 2000/03/20
Machine : Toshiba Dynabook SS 3380 (CPU Celeron 400Mhz, HDD 8GB, RAM
64MB)
FreeBSD : OK (3.3-RELEASE)
Pccard Pkg: PAO3-19991011
APM BIOS : OK (1.2)
PCIC : Toshiba ToPIC97 PCI-CardBus Bridge
Cards :
- 3Com Etherlink III, 3C589B
[Prev][336][Next]
Name : Taro Nakada (nyak@mb.kcom.ne.jp)
Date : 2000/03/19
Machine : DEC Digital HiNote Ultra II LTS5150 (CPU Pentium 150MHz,
HDD 4GB, RAM 40MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- TDK LAK-CD021BX
- Adaptec APA-1460A
[Prev][335][Next]
Name : ANDRIANOV, Fedor (fedandr@math.uchicago.edu)
Date : 2000/3/18
Machine : FUJITSU Lifebook 435Dx (CPU Intel Pentium MMX 133MHz, HDD
1.3GByte: Windows95=540MByte, FreeBSD=810MByte, RAM
24MByte)
FreeBSD : OK (FreeBSD 3.3R)
Pccard Pkg: Old PAO package incorporated into original FreeBSD source
tree
APM BIOS : OK (1.2)
Config Opt: PCIC_RESUME_RESET
PCIC : Cirrus Logic PD6729/6730 PC-Card Controller
Cards :
- TDK V.34 FAX/MODEM Card DFV3400
# TDK 36.6 Fax/Data/Voice Modem
card "TDK" "DFV3400 Data/Fax/Voice Modem"
config 0x23 "sio2" 11
insert echo TDK DFV3400 inserted
remove echo TDK DFV3400 removed
Misc Info :
Sound device is available as SB compatible mode.
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 0
device opl0 at isa? port 0x388
[Prev][334][Next]
Name : Toru Yano (toru@maid.ne.jp)
Date : 2000/3/18
Machine : Let's Note CF-A44EJ8 (CPU MMX Pentium 266MHz, HDD 9GB, RAM
128MB)
FreeBSD : OK (3.4-R)
Pccard Pkg: PAO3-20000130
APM BIOS : OK
Cards :
- PV-JF56
- Macnica ME1
[Prev][333][Next]
Name : Hidenori Ishikawa (hideishi@ops.dti.ne.jp)
Date : 2000/03/09
Machine : Mitsubishi AMiTY CN M3031 (CPU Intel Pentium MMX 200MHz,
HDD 2.1GB, RAM 32MB + 32MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000113
APM BIOS : OK (1.2)
Config Opt: none
PCIC : TI PCI-1220 [PCI-CardBus Bridge]
Cards :
- PLANEX (PLANET) FNW-3600-T (worked at 100BaseTX)
Misc Info :
Graphic Chip is NeoMagic 128ZV+, X worked at 800x600(16bit)
Sound Chip is ESS1879, in order to use, you have to change the
PnP_id of /sys/i386/isa/snd/sb_dsp.c
[Prev][332][Next]
Name : Amagai Yoshiji (amagai@nue.org)
Date : 2000/3/7
Machine : IBM ThinkPad 240 Model 2609-43J (CPU Mobile Ceceron
400MHz, HDD 12GByte, RAM 192MByte)
FreeBSD : OK (FreeBSD 3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365DF (5 mem & 2 I/O windows)
Cards :
- card "3Com" "Megahertz 574B"
Misc Info :
Disk C: 2G Windows 98
Disk D: 9G FreeBSD
Video: NeoMagic NM2160 2Mbyte, XFree86-3.3.5 OK
800x600 (Virtual 1024x768) with 16 Color Depth
Sound: OSS/FreeBSD 3.4 + ESS Solo-1 option, OK
On Memory Suspend: zzz command OK
LCD close OK
Save-to-Disk suspend: OK
Modem: NG
[Prev][331][Next]
Name : Yasuhiro Magara (gama@cds.ne.jp)
Date : 2000/03/02
Machine : TOSHIBA Libretto 70CTA (CPU MMX Pentium 120Mhz, HDD
IBM-DARA-206000 5.6G (3.6G for FreeBSD), RAM 32MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365A/B (5 mem & 2 I/O windows)
Cards :
- corega EtherII PCC-T
# COREGA EtherII PCC-T Ethernet Card
card "corega K\\.K\\." "corega EtherII PCC-T"
config auto "ed1" any
insert logger -s EtherII Corega EtherII PCC-T inserted
insert /etc/pccard_ether $device
remove logger -s EtherII Corega EtherII PCC-T removed
remove /etc/pccard_ether_remove $device
- ACCTON EN2216-PCMCIA-ETHERNET
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
# config auto "ed0" any 0x10
config 0x22 "ed0" any 0x10
ether 0x1c0 00:00:e8
insert /etc/pccard_ether $device
insert logger -s Accton EN2216 inserted
remove /etc/pccard_ether_remove $device
remove logger -s Accton EN2216 removed
[Prev][330][Next]
Name : Robert Bowen (robert@braingarage.com)
Date : 2000/2/22
Machine : IBM thinkpad 240 (CPU Celeron 300, HDD 6.4gb, RAM 192mb)
FreeBSD : No problem w/3.4r. Installed from DOS partition
(3.4-release)
Pccard Pkg: PAO3 20000130
APM BIOS :
perfectly. No problems at all - all apm functions appear to work
fine. (1.2)
Config Opt:
I used 0x1? flag in device pcic line because of "null" not found
errors. They never went away, however.
PCIC : TI in compatibility mode
Cards :
- Generic "kingsys" PCMCIA ethernet
card "PCMCIA" "Ethernet Card"
config auto "ed0" any 0x10
insert logger -s Ethernet Card inserted
insert /etc/pccard_ether $device
remove logger -s Ethernet Card removed
remove /etc/pccard_ether_remove $device
Misc Info :
I can't get the sound to work, but I am no expert. If you can
help with ESS-solo configuration, please email me.
[Prev][329][Next]
Name : Toshio Saruta (saruta@higeta.co.jp)
Date : 2000/2/22
Machine : IBM Thinkpad240 (CPU Mobile Celeron 300MHz, HDD 6GB, RAM
64MB)
FreeBSD : OK (2.2.8-STABLE (3.3RELEASE also OK))
Pccard Pkg: PAO-19990405
APM BIOS : OK (1.2)
PCIC : Texas Instruments PCI-1211
Cards :
- Corega Ether PCC-T
- Fujitsu FMV-182
- Kyocera DataScope for DoCoMo
# KYOCERA DataScope for DoCoMo
card "DataScope for DoCoMo" "1.00"
config 0x30 "sio2" any 0x82
insert logger -s DataScope for DoCoMo inserted
remove logger -s DataScope for DoCoMo removed
[Prev][328][Next]
Name : ANAZAWA, Akio (anazawa@hic-soft.co.jp)
Date : 2000/02/15
Machine : IBM ThinkPad 570 (2644-AAJ) (CPU Mobile Celeron 366MHz,
HDD 6.4GB (2GB for Win98, rest for FreeBSD), RAM 128MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365DF (5 mem & 2 I/O windows)
Cards :
- MELCO(LPC2-T) [ETHERNET-CARD-UE-2216] [R02]
[Prev][327][Next]
Name : YAMAGATA, yoriyuki (yoriyuki@ms.u-tokyo.ac.jp)
Date : 2000/02/08
Machine : Dell Inspiron 3500 (CPU Celeron 400, HDD 6G (5G for
FreeBSD, 1G for Windows), RAM 64M bytes)
FreeBSD : OK (3.3)
Pccard Pkg: PAO3-19991019
APM BIOS : OK (1.2)
PCIC : TI PCI 1220 CardBus
Cards :
- TDK MODEM DF5633E
Misc Info : Save-to-Disk suspend is N. G.
[Prev][326][Next]
Name : Akihiro SHIMIZU (akihiro@personal.email.ne.jp)
Date : 2000/1/6
Machine : SHARP Mebius PC-PJ2-X3 (CPU Mobile Pentium II 333MHz, HDD
8.1GB, RAM 128MB)
FreeBSD : OK (3.3)
Pccard Pkg: PAO3-19991011, PAO3-19991220
APM BIOS : OK (1.2)
Config Opt: PSM_HOOKAPM PSM_RESETAFTERSUSPEND
PCIC :
Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows)
Cards :
- AIWA TM-J1281 (ISDN TA)
- NTT DoCoMo 9600mkII (MODEM)
- Panasonic TO-CAF56K (MODEM)
- MELCO CDN-D12EX (Ninja-ATA CD-ROM Drive)
- 3Com EtherLinkIII 3C589D (ep0)
NG-Cards :
- SHARP CE-CD01(CD-ROM)
Misc Info :
Internal modem cannot be used.
Internal ethernet can be used if the BIOS setup flag
named "Plug & Play O/S" turns to "No".
[Prev][325][Next]
Name : Toshiyuki NAKAMIYA (yuki@ouhs.ac.jp)
Date : 1999/12/13
Machine : Fujitsu FMV-BIBLO NC13D (CPU Pentium (P54C) 133MHz, HDD
1GB, RAM 32MB)
FreeBSD : OK (2.2.8-STABLE)
Pccard Pkg: PAO-19990405
APM BIOS : OK (1.2)
PCIC : Ricoh RL53C465
Cards :
- 3Com EtherLink III 3C589B
- 3Com EtherLink III 3C589D
Misc Info :
Internal modem is availabe as COM2.
Sound device is available as SB compatible mode.
controller snd0
device sb0 at isa? port 0x220 irq 1 vector sbintr
device opl0 at isa? port 0x388
[Prev][324][Next]
Name : Toshiyuki NAKAMIYA (yuki@ouhs.ac.jp)
Date : 1999/12/13
Machine : SONY VAIO PCG-726 (CPU MMX Pentium (P55C) 200MHz, HDD
2.1GB, RAM 64MB)
FreeBSD : OK (2.2.8-STABLE)
Pccard Pkg: PAO-19990405
APM BIOS : OK (1.2)
PCIC : TI PCI-1131
Cards :
- 3COM EtherLink III 3C589B
- 3COM EtherLink III 3C589D
- Allied-Telesis CentreCOM LA-PCM
Misc Info :
- Internal modem is available as COM2.
- Sound device is availabe as SB compatible mode.
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
device opl0 at isa? port 0x388
- IrDA device will be detect as COM3 (but I don't know how to use).
device sio2 at isa? port "IO_COM3" tty irq10 vector siointr
- With Accelerated-X (Laptop), you need config option as following:
options SYSCONS_VTY_RESUME
to work correctlly when resuming.
[Prev][323][Next]
Name : OGURA Masaya
Date : 1999/12/13
Machine : Fujitsu FM/V Biblo 5100NC/S (CPU Pentium 100M, HDD 1.6G,
RAM 64M)
FreeBSD : OK (FreeBSD 3.3R)
Pccard Pkg: PAO3-19991011.tar.gz
APM BIOS : OK
Cards :
- CentreCOM LA-PCM
[Prev][322][Next]
Name : Yoshihiko Sarumaru (mistral@imasy.or.jp)
Date : 2000/04/27
Machine : SONY VAIO 505R (PCG-505R) (CPU MMX Pentium 233 MHz, HDD
3GB, RAM 64 MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000106
APM BIOS : OK (1.2)
Config Opt: PSM_HOOKAPM, PSM_RESETAFTERSUSPEND
PCIC : Ricoh RL5C475/476 [CardBus bridge mode]
Cards :
- Billionton LNT-10TB (NE2000 compatible; ed)
- 3Com Etherlink III (3C589C; ep)
- TDK LAK-CD021BX (fe)
- Adaptec SlimSCSI (APA-1460D; aic)
- Ninja-ATA (PCGA-CD51; wdc)
- EPSON FlashPacker 6MB (SunDisk OEM; wdc)
- PCM250AM (wdc)
# PCM250AM 2.5in HDD adapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
config default "wdc1" any cardio 0x180 10
insert logger -s PCM250AM inserted
remove logger -s PCM250AM removed
Misc Info :
BIOS setting: Plug & Play O/S = No, IrDA = disabled.
USB, Audio (ESS1879), Internal Modem (K56flex / V.90) are also available.
Speaker volume control by mixer command is something wrong (Fn-F4 work fine).
apm -Z doesn't work (Fn-F12 work well).
LCD close action does not make suspend.
PCM250AM need a wdc? entry which use port 0x180 and above change to
pccard.conf.
[Prev][321][Next]
Name : Chihiro Hokari (chihiro@hokari.kashiwazaki.niigata.jp)
Date : 1999/12/12
Machine : Fujitsu FMV-BIBLO MCIX23 (CPU Intel MMX Pentium 233, HDD
4G, RAM 64M)
FreeBSD : OK (3.3)
Pccard Pkg: PAO3-19991011
APM BIOS : OK
PCIC : Ricoh RL5C475 PCI-CardBus Brige
Cards :
- COREGA FastEther PCC-TX
[Prev][320][Next]
Name : ANAZAWA, Akio (anazawa@hic-soft.co.jp)
Date : 1999/12/12
Machine : IBM ThinkPad 570 (2644-AAJ) (CPU Mobile Celeron 366MHz,
HDD 6.4GB (2GB for Win98, rest for FreeBSD), RAM 128MB)
FreeBSD : OK (3.3-RELEASE)
Pccard Pkg: PAO3-19991007
APM BIOS : OK (1.2)
PCIC : Intel 82365DF (5 mem & 2 I/O windows)
Cards :
- MELCO(LPC2-T) [ETHERNET-CARD-UE-2216] [R02]
[Prev][319][Next]
Name : Mark Atkinson (darkmark@kuoi.asui.uidaho.edu)
Date : 1999/12/08
Machine : Dell Lattitude CPi (CPU 233.87 Mhz 686-Class CPU, HDD
3909MB, RAM 65536K bytes)
FreeBSD : OK (3.3-RELEASE)
Pccard Pkg: PAO3-19991011
APM BIOS : OK (0x01)
Config Opt: none
PCIC : TI PCI-1131 PCI-Cardbus Bridge rev 0x01
Cards :
- 3com 3C574-TX Fast EtherLink PC Card
- Psion Dacom Gold Card Global 56K+Fax
Misc Info : DHCP assigned 3C574-TX works even after suspend
[Prev][318][Next]
Name : Akihiro IIJIMA (aki@jp.freebsd.org)
Date : 1999/12/07
Machine : SONY VAIO 505V/CBP (PCG-505V/CBP) (CPU Intel MMX Pentium
300MHz, HDD 4.2GB TOSHIBA MK4309MAT, RAM 64MB)
FreeBSD : OK (3.2-R + PAO)
Pccard Pkg: ??
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C475 PCI-CardBus Brige
Cards :
- Xircom CompactCard Ethernet 10 (CFE-10)
Misc Info :
First, Disable IrDA(IRQ 10).
PAO installer, select IRQ "Do not use 1-10"
sound chip,
pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa
ESS1879 (rev 11, native mode)
[Prev][317][Next]
Name : TATEOKA, Takamichi (tate@spa.is.uec.ac.jp)
Date : 1999/12/07
Machine : TOSHIBA Dynabook Portage SS3300 (CPU Mobile Pentium-II
266MHz, HDD 6GB, RAM 64MB)
FreeBSD : OK (2.2.8-RELEASE)
Pccard Pkg: PAO-19990114
APM BIOS : OK (1.2)
PCIC : TOSHIBA TOPIC97 / Works on PCIC Compatible mode and
Automatic mode
Cards :
- Megaherts CC10BT/2
ignirq 1 2 3 4 5 6 7 8 9
io 0x240-0x2e0 0x300-0x360
- Laneed LD-CDY
ignirq 1 2 3 4 5 6 7 8 9
io 0x240-0x2e0 0x300-0x360
# Laneed LD-10/100CD
card "Laneed" "LD-CDY"
config default "ed0" any
insert echo Laneed LD-10/100CD inserted
insert /etc/pccard_ether $device
remove echo Laneed LD-10/100CD removed
remove /etc/pccard_ether_remove $device
- NTT DoCoMo PALDIO 611S PC CARD
ignirq 1 2 3 4 5 6 7 8 9
io 0x240-0x2e0 0x300-0x360
- WELLTRONIX WM-3314CIA
ignirq 1 2 3 4 5 6 7 8 9
io 0x240-0x2e0 0x300-0x360
# kernel patch is required, refer bsd-nomads:10709
- sanyo SR6 (8MB SmartMedia) + Hagiwara Sys-com SmartMedia Adapter
function fixed_disk
config 0x01 "wdc1" any
insert echo Flash ATA / ATA HDD inserted
remove echo Flash ATA / ATA HDD removed
# following kernel configuration is required
#
# controller wdc1 at isa? disable port "0x250" bio irq 10 vector wdintr
# disk wd1 at wdc1 drive 0
Misc Info :
Following kernel option is required to make hibernation working:
options "MAXMEM=(63*1024)"
Or, apply kernel patch reported in FreeBSD Problem Report kern/10466.
I heard this kernel patch cannot work on 128MB memory model.
Hibernation works, but suspend/resume cannot work.
I reported some additional hints to bsd-nomads:10709. (in Japanese)
[Prev][316][Next]
Name : Yoichi NAKAYAMA (yoichi@eken.phys.nagoya-u.ac.jp)
Date : 1999/12/06
Machine : SONY VAIO PCG-505V/CBX (CPU MMX Pentium 300MHz, HDD 4.3GB,
RAM 64MB)
FreeBSD : OK (3.3R + PAO3)
APM BIOS : OK (1.2)
Cards :
- MELCO LPC2-T
Misc Info :
Sound: OK (pcm0)
Internal Modem: OK
Hibernation/Suspend by Fn+ESC/F12: OK
(hibernation slice was created by phdisk.exe)
[Prev][315][Next]
Name : TAKEMURA, Gaku (gaku@mbc.sphere.ne.jp)
Date : 1999/12/04
Machine : TOSHIBA Libretto ff1050 (CPU Intel Pentium MMX 233MHz, HDD
3.2GByte: Windows98=1.7GByte, FreeBSD=1.4GByte, RAM
96MByte)
FreeBSD : OK (FreeBSD 3.3R)
Pccard Pkg: PAO3-19991011
APM BIOS : OK (1.2)
Config Opt: none
PCIC : Toshiba ToPIC97 CardBus Controller, ver007
Cards :
- I-O DATA PCET/TX Fast Ethernet LAN Card
- TDK V.90/K56flex MODEM Card DF5633E
- TDK Digital Cellular Adapter DP9628
# TDK Digital Cellular Adapter DP9628
card "TDK" "DP9628"
config auto "sio3" any 0x82
insert logger -s TDK Digital Cellular Adapter DP9628 inserted
remove logger -s TDK Digital Cellular Adapter DP9628 removed
[Prev][314][Next]
Name : M. Meiarashi
Date : 1999/12/04
Machine : Toshiba Libretto 70 (CPU MMX Pentium 120MHz, HDD 1.6
GBytes, RAM 32MBytes)
FreeBSD : OK (3.3-RELEASE)
Pccard Pkg: PAO-19991011
APM BIOS : OK (1.2)
PCIC : Intel 82365
Cards :
- Toshiba 10/100 Ethernet PC Card IPC5008A
# Toshiba 10/100 Ethernet Card
card "Toshiba" "10/100 Ethernet PC Card"
config auto "xe0" any
cardio 0x300 0x10
insert logger -s Toshiba 10/100 Ethernet Card inserted
insert /etc/pccard_ether $device
remove logger -s Toshiba 10/100 Ethernet Card removed
remove /etc/pccard_ether_remove $device
Misc Info : [bsd-nomads:12164]
[Prev][313][Next]
Name : Matthias Kretschmer (schreib_mir_du_spacken@gmx.de)
Date : 1999/12/02
Machine : Mitac 5036 (CPU Tillamook 266MHz, HDD Toshiba ???? 4,3 GB,
RAM 64 MB SD-Ram)
FreeBSD : OK (3.2)
APM BIOS : OK (1.2)
Config Opt: nothing
PCIC : TI PCI-1220
Cards :
- ABOCOM LAN/Modem-Card - [56k-Modem (K56Flex+V.90) &]
10 MBit-Ethernet NE2000 comp. - LM560
card "PCMCIAs" "ComboCard"
config auto "ed0" any
cardio 0x340 0x20
insert /etc/pccard_ether $device
remove /etc/pccard_ether_remove $device
[Prev][312][Next]
Name : Olaf Erb (olaf@erb.nu)
Date : 1999/12/02
Machine : Dell Inspiron 3500 (CPU Celeron 366, HDD 6.4GB HD, Floppy,
CD-ROM, RAM ??)
FreeBSD : OK (3.2-RELEASE)
Pccard Pkg: PAO-3.2
APM BIOS : OK
Config Opt: APM_BATT_LOW_SUSPEND CB_TEST FORCE_IRQ_ROUTING
Cards :
- D-link DE-660 Ethernet Card
- Apollo 56k fax/modem card
Misc Info :
Sound: OK with Luigis driver
XFree: OK with XF86_SVGA (neomagic driver)
CardBus: see options in the config file, plain PAO bootdisk
didn't work :( You've to install all the stuff from CDROM first,
then apply PAO distribution and build a custom kernel.
[Prev][311][Next]
Name : AOYAGI Yoichi (ao@mo.cs.toyo.ac.jp)
Date : 1999/12/02
Machine : TOSHIBA Satellite Pro 430CDT (CPU pentium 120 MHz, HDD
1.3GB, RAM 48 MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980614
APM BIOS : OK
Cards :
- CyQ've ELA-010 10BASE-T LAN Card
card "CyQ've" "ELA-010"
config default "ed0" any 0x10
insert echo CyQ've ELA-010 LAN card inserted
insert /etc/pccard_ether ed0
remove echo CyQ've ELA-010 LAN card removed
remove /sbin/ifconfig ed0 delete
[Prev][310][Next]
Name : Ouchi Atsuo (vorspiel@duelists.org)
Machine : Toshiba Libretto70 (CPU MMX Pentium 120MHz, HDD
1.6Gbyte(FreeBSD partition is about 800Mbyte), RAM 32Mbyte)
FreeBSD : OK (2.2.7)
Pccard Pkg: PAO-980913
APM BIOS : OK (1.1)
Config Opt: nothing
PCIC : Intel 82365A/B (5 mem & 2 I/O windows)
Cards :
- EPSON FlashPacker 10MB(Flash ATA; SunDisk-OEM)
- I/O Data PCCF-30M(CompactFlash; SunDisk-OEM)
- Melco CDN-D8C(IDE CD-ROM drive)
- NTT Docomo (formerly NTT Personal) Paldio 321S(PHS with PC Card)
card "NTT Personal" "32K Paldio 321S PC CARD"
config 0x22 "sio2" any 0x40000
insert echo NTT Personal Paldio 321S PC Card inserted
remove echo NTT Personal Paldio 321S PC Card removed
- TDK LAK-CD021BX(10base-T)
Misc Info :
I use the sound device in MSS mode with Luigi's Sound Driver.
device pcm0 at isa? port ? irq 5 drq 1 flags 0x0 vector pcmintr
[Prev][309][Next]
Name : Tatsuya TANIKAWA (tanikawa@fs.kyoto.omronsoft.co.jp)
Machine : TOSHIBA DynaBook SS-R 575 (CPU Pentium/P54C 75MHz, HDD
2067MB / TOSHIBA MK2103MAV, RAM 40MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (1.0 compatible mode)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH
ATAPI_DETACH
PCIC : Intel 82365A/B (or clones)
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460
- D-link DE-650 Ethernet Card
- Microtech XpressDock
[Prev][308][Next]
Name : Liang Tai Hwa (avatar@www.mmlab.cse.yzu.edu.tw)
Machine : Twinhead Slimnote VX2 266TG (CPU Intel Pentium II 266MHz,
HDD 4.3Gbytes, RAM 64Mbytes)
FreeBSD : No problem (2.2.7-RELEASE)
APM BIOS : No problem (1.1 (Linux reports 1.2))
Config Opt: APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH,
ATAPI_DETACH
PCIC : TI PCI-1221 PCI-CardBus Bridge
NG-Cards :
- D-Link DE-660
("ed0: device timeout" under FreeBSD 2.2.7R PAO; however, this card
works perfectly under Windoze98 & Linux(with pcmcia-cs-3.0.6))
Misc Info : Need XFree86-3.3.3 to run X
[Prev][307][Next]
Name : Nobuyoshi SATO (jju@mo.cs.toyo.ac.jp)
Machine : Panasonic Let's Note CF-M32J8 (CPU MMX Pentium 166MHz, HDD
2GB, RAM 32MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (APM 1.1 (APM 1.2 on Windows98))
PCIC : TI PCI-1250
Cards :
- corega Ether PCC-T
[Prev][306][Next]
Name : FUJITA,Wataru (wfujita@net.nagasaki-u.ac.jp)
Machine : IBM ThinkPad235 2607-10J (CPU CPU MMX Pentium 233MHz, HDD
3253MB, RAM 96MB)
FreeBSD : OK (2.2.7 release)
Pccard Pkg: PAO-980912
APM BIOS : OK (APM BIOS version 1.1)
PCIC : RICHO RL5C476
Cards :
- Melco LPC2-T
# Melco LPC2-T
card "MELCO" "LPC2-T"
config 0x22 "ed0" 15 0x10
ether 0x1c0 00:40:26
insert echo MELCO LPC2-T inserted
insert /etc/pccard_ether $device
remove echo MELCO LPC2-T removed
remove /etc/pccard_ether_remove $device
[Prev][305][Next]
Name : Ko Nonomura (nonomura@mb.infoweb.ne.jp)
Machine : Libretto SS 1000 (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM
32M)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (1.1)
PCIC : Tohiba ToPIC97 PCI-CardBus Bridge
Cards :
- ACCTON EN2216
Misc Info :
APM works, but I can use only Memory resume mode,
I can not use suspend to HDD.
[Prev][304][Next]
Name : Nobuaki NAKATSUBO (KGG02005@nifty.ne.jp)
Machine : Hitachi Prius 210G (2109T16G) (CPU MMX Pentium 166MHz, HDD
2.1GB, RAM 32MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (1.1)
Config Opt: PCIC_IRQ!=5
PCIC : RICOH RL5C475/RL5C476
Cards :
- MELCO IFC-SC2
- Allied Telesis CentreCOM LA-PCM
Misc Info :
The PAO-980913 can operate the card slots through the
"CardBus" setting.
All devices get inactive except fdc0, ncv0, wdc0, sc0,
pcic0 on the installing. This is a safe way to detect
a SCSI device in a short time.
IRQ5 should be excluded in the PAO-980913 installation
to avoid a confliction between the pcic0 and a sound card.
[Prev][303][Next]
Name : MITSUNAGA Noriaki (mitchy@er.ams.eng.osaka-u.ac.jp)
Machine : COMPAQ CONTURA AERO 4/33C (CPU 486SX-33MHz, HDD 2.1GB, RAM
20MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-snap-981026
APM BIOS : OK (1.1)
PCIC : VLSI 82C146
Cards :
- TDK LAK-CD021AX
- TDK LAK-CD021BX
- Media Intelligent MSC-110
- TDK DF2814
- Megaherts XJ2144
- TOSHIBA FDDPCCM1
- IBM CD-20X
[Prev][302][Next]
Name : Dan Kogai (dankogai@dan.co.jp)
Machine : Sharp Mebius PC-PJ1-98 (CPU MMX Pentium 233MHz, HDD 4.3MB,
RAM 64MB)
FreeBSD : OK (2.2.7-RELEASEVersion number of FreeBSD)
Pccard Pkg: boot-pao.flp (PAO-980913_tar.gz)
APM BIOS : OK (1.1)
Config Opt: PSM_HOOKAPM, PSM_RESETAFTERSUSPEND
PCIC : Ricoh RL5C475 PCI-CardBus Brige
Cards :
- 3Com Etherlink III 3C589B (ep0)
- TDK LAK-CD021AX (fe0)
NG-Cards :
- Sharp CE-CD01
Misc Info :
* If you used Win98 or reset BIOS setups prior to FreeBSD boot, make sure
you COLD-START (shutdown and turn on the power, not reboot) or PC card will
not be probed properly (This symptom was present in DOS).
* With the machine cold-started, boot-pao installation was fine. I first
made FreeBSD partition with FIPS 1.5 and chose NFS installation.
* CE-CD01 is supposed to work as ATA card but the driver fails to configure
wdc1. Hmm....
* options above are required to use track pad correctly.
* For XF86, NeoLogic Driver is available at
http://www-cv.mech.eng.osaka-u.ac.jp/~okada/FreeBSD/NeoMagic/NeoMagic.html
(Thank you, Mr. Okada!). Make sure you config your kernel with options
above.
[Prev][301][Next]
Name : Noritaka Suzuki (nosu@mail.wbs.ne.jp)
Machine : IBM ThinPad 235 (CPU MMX Pentium233, HDD 3.2G, RAM 64M)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: 227R-PAO-980913
APM BIOS : OK (1.1)
PCIC : Ricoh RL5C476 PCI-CardBus Brige
Cards :
- corega FastEther PCC-TX
# COREGA Ether PCC-TX
card "corega K.K." "corega FastEther PCC-TX"
config default "ed0" any
insert echo corega FastEther PCC-TX inserted
insert /etc/pccard_ether $device
remove echo corega FastEther PCC-TX removed
remove /etc/pccard_ether_remove $device
Misc Info : 100BASE-TX
[Prev][300][Next]
Name : Hironao Kobayashi (hkobayashi@accs.or.jp)
Machine : DELL Inspiron 3200 (CPU PentiumII 266MHz, HDD
4Gbyte(2GByte:Win98,FreeBSD:2GByte), RAM 128Mbyte)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980912
APM BIOS : OK (1.1)
PCIC : Texas Instruments PCI-1131 CardBus
Cards :
- FMV-J182A(Ethernet Card)
[Prev][299][Next]
Name : SATO Takeshi (tasato@lab.keihin.nkk.co.jp)
Machine : Panasonic Let's note CF-S21 (CPU MMX Pentium 200MHz, HDD
3.2GB, RAM 96MB)
FreeBSD : OK (2.2.7)
APM BIOS : OK (1.1)
PCIC : TI PCI-1250
Cards :
- RATOC REX-9530
- 3Com 3C-589D-Combo
Misc Info :
ignore irq 5,10
pc-cards are using irq 9, 15
[Prev][298][Next]
Name : Takayuki Uchikoba (arkun@momokohouse.rim.or.jp)
Machine : NEC PC-9821Ns (CPU 486DX2-50MHz, HDD 340MBytes, RAM
14MBytes)
FreeBSD : OK (2.2.6-RELEASE Rev02 + PAO-980430 +
PAO-980430-pc98-patch)
APM BIOS : OK (APM BIOS version 1.4)
PCIC : Cirrus Logic PD672X
Cards :
- NTT Personal 32K Paldio 321S PC CARD
card "NTT Personal" "32K Paldio 321S PC CARD"
config 0x22 "sio3" pio
insert echo NTT Personal 32K Paldio 321S PC CARD inserted
remove echo NTT Personal 32K Paldio 321S PC CARD removed
- SII PHS DATA LINK MC-P100
card "SII" "PHS DATA LINK"
config 0x22 "sio3" any
insert echo SII PHS DATA LINK MC-P100 inserted
remove echo SII PHS DATA LINK MC-P100 removed
- NTT DoCoMo Mobile D Card 96P1
card "NTT DoCoMo" "Mobile D Card 96P1" "MDC96P1"
config 0x22 "sio3" any
insert echo NTT DoCoMo Mobile D Card 96P1 inserted
remove echo NTT DoCoMo Mobile D Card 96P1 removed
- MICROCORE MC144PC
- PLANEX ENW-3502-T
[Prev][297][Next]
Name : Lee, Jae Hong (jhlee00@chollian.net)
Machine : IBM ThinkPad 560, Type 2640 (CPU Intel Pentium. 586, HDD
1G (600M Dos, 400M FreeBSD), RAM 40M)
FreeBSD : OK (2.2.7)
Pccard Pkg: PAO 980913
APM BIOS : NG (1.1)
PCIC : Cyrrus Logic PD6729/6730
Cards :
- IBM PCMCIA 33.6/14.4 Data/Fax Modem
# IBM PCMCIA 33.6/14.4 Data/Fax Modem
card " " "PCMCIA 33.6/14.4 Data/Fax Modem"
config 0x23 "sio1" 3
reset 1000
insert echo IBM PCMCIA 33.6/14.4 Data/Fax Modem inserted
remove echo IBM PCMCIA 33.6/14.4 Data/Fax Modem removed
NG-Cards :
IBM Portable 4X Speed CD-ROM Drive CD-400
Misc Info :
=====
1. PCMCIA Modem works well.
2. but CD-ROM Drive doesn't work, because pccard daemon doesn't probe CDROM card.
When I insert cdrom card, it issues following message.
Sometimes it issues "Probe failed" immediately before Attach Failed.
And then, sometimes it issues same message twice.
myname# Sep 25 18:39:47 myname /kernel: Card inserted, slot 0
Sep 25 18:39:47 myname /kernel: Card inserted, slot 0
Sep 25 18:39:50 myname pccardd[36]: Card "IBM"("PCMCIA CD-ROM Drive CD-400") [^?] [] matched "IBM" ("PCMCIA CD-ROM Drive CD-400") [(null)] [(null)]
Sep 25 18:39:50 myname pccardd[36]: Card "IBM"("PCMCIA CD-ROM Drive CD-400") [^?] [] matched "IBM" ("PCMCIA CD-ROM Drive CD-400") [(null)] [(null)]
Sep 25 18:39:53 myname /kernel: Attach Failed
Sep 25 18:39:53 myname /kernel: Attach Failed
Sep 25 18:39:53 myname /kernel: Return IRQ=15
Sep 25 18:39:53 myname /kernel: Return IRQ=15
Sep 25 18:39:53 myname pccardd[36]: driver allocation failed for IBM (Device not configured)
Sep 25 18:39:53 myname pccardd[36]: driver allocation failed for IBM (Device not configured)
Sep 25 18:39:58 myname /kernel: Card removed, slot 0
Sep 25 18:39:58 myname /kernel: Card removed, slot 0
3. I don't use apm.
====== The content of execution of "dmesg" is as follows ========:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.7-RELEASE #0: Fri Sep 25 18:15:02 KST 1998
root@myname.my.domain:/usr/src/sys.PAO/compile/THINKPAD.PAO
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 41943040 (40960K bytes)
avail memory = 38813696 (37904K bytes)
Initializing PC-card drivers: sio wdc
Probing for devices on PCI bus 0:
chip0 <Intel 82437MX mobile PCI cache memory controller> rev 2 class 60000 on pci0:0:0
chip1 <Intel 82371MX mobile PCI I/O IDE accelerator (MPIIX)> rev 3 class 68000 on pci0:1:0
vga0 <VGA-compatible display device> rev 211 class 30000 int a irq ?? on pci0:3:0
pcic0 <Cirrus Logic PD6729/6730 PC-card Bridge> rev 226 class 60500 int a irq ? on pci0:19:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DSOA-21080>
wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
pcic0 at 0x3e0-0x3e1 irq 11 flags 0x1 on isa
PC-Card ctlr(0) Cirrus Logic PD-6729/6730 [i82365 compatible mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
pcic0: slot 1 controller I/O address 0x3e0
sb0 at 0x220 irq 5 drq 1 on isa
Sb0: <SoundBlaster Pro 3.1>
Intel Pentium F00F detected, installing workaround
========Kernel Config file is as follows ===================:
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $Id: LTS.html,v 1.1.1.14 2001/11/30 07:03:03 toshi Exp $
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
cpu "I586_CPU"
#cpu "I686_CPU"
ident THINKPAD
maxusers 10
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15 #Be pessimistic about Joe SCSI
device
options "MAXMEM=(40*1024)"
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options APM_PCCARD_RESUME
options PCIC_RESUME_RESET
#options SCSI_DETACH
options ATAPI_DETACH
config kernel root on wd0
controller isa0
#controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
# Unless you know very well what you're doing, leave ft0 at drive 2, or
# remove the line entirely if you don't need it. Trying to configure
# it on another unit might cause surprises, see PR kern/7176.
tape ft0 at fdc0 drive 1
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd1 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
#device wfd0 #IDE floppy (LS-120)
# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
#controller ncr0
#controller amd0
#controller ahb0
#controller ahc0
#controller dpt0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#ontroller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector sea
intr
#options DPT_MEASURE_PERFORMANCE # Required by DPT driver??
#options DPT_VERIFY_HINTR # Some hardware must have it!
#options DPT_TRACK_CCB_STATES # Some hardware must have it!
#options DPT_HANDLE_TIMEOUTS # Some hardware must have it!
#options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more
#controller scbus0
#device sd0
#device od0 #See LINT for possible `od' options.
#device st0
#device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? disable # Advanced Power Management
options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
# Don't remove these two lines !
pseudo-device card 1
# PCCARD (PCMCIA) support
#controller card0
device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr
#device pcic1 at isa? port 0x3e2
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmin
tr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device tx0
#device vx0
#device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ex0 at isa? port? net irq? vector exintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
#device cs0 at isa? disable port 0x300 net irq ? vector csintr
# Audio Drivers
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device vn 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
pseudo-device speaker
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
# This provides support for System V shared memory.
#
options SYSVSHM
options SYSVSEM
options SYSVMSG
#options DDB
[Prev][296][Next]
Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu,
Tokyo-Rika-Daigaku) (sakai@miya.ee.kagu.sut.ac.jp)
Machine : DELL Latitude CP M166ST (CPU MMX Pentium 166MHz, HDD
4.0GB, RAM 32MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (APM BIOS version 1.1)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET
PCIC : TI PCI-1131 [CardBus bridge mode]
Cards :
- Logitec LPM-LN20T (Ethernet Card)
- Adaptic SlimSCSI APA-1460J
[Prev][295][Next]
Name : Gerd Heber (heber@capsl.udel.edu)
Machine : Toshiba SatellitePro 445 CDX (CPU Intel Pentium 133 MHz
MMX, HDD 1.4 GB, RAM 32 MB)
FreeBSD : No problem (2.2.6, 2.2.7)
Pccard Pkg: PAO-980913
APM BIOS : No problem (1.1)
Config Opt: NO
PCIC : PC-Card ctlr(0) Intel 82365A/B (5 mem & 2 I/O windows)
Cards :
- 3Com Etherlink III, 3C589D
- US Robotics Megahertz XJ-CC4288
[Prev][294][Next]
Name : Jeroen Ruigrok van der Werven (asmodai@wxs.nl)
Machine : Dell Latitude CP (CPU Pentium MMX 233 MHz, HDD 2 GB, RAM
64 MB)
FreeBSD : Have installed it a number of times OK (2.2.6, 2.2.7,
3.0-SNAP May)
APM BIOS : The standard apm doesn't work, haven't tried the FORCE
option yet (dunno)
Config Opt: none
Misc Info :
Used the C/Port Replicator with it, works good, detects vx0, have
yet to test it...
[Prev][293][Next]
Name : Toshiyuki Kawashima (tos@fa2.so-net.ne.jp)
Machine : Panasonic AL-N1T512J5 (CPU Pentium 120MHz, HDD 4GB, RAM
48MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- Allied Telesis Ethernet Card LA-PCM
- Microtech XpressDock
#XpressDock
card "Microtech International Inc." "IDE PCCARD"
config default "wdc1" any 0x2000
cardio 0x170 0x10
insert echo XpressDock inserted
remove echo XpressDock removed
[Prev][292][Next]
Name : HASEGAWA Tomoki (thasegawa@mta.biglobe.ne.jp)
Machine : Toshiba DynaBook Portege 660CDT/1.4 (CPU Pentium 150MHz,
HDD 6.4GB(MK-6409MAV), RAM 80MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (1.1)
PCIC : Intel 82365A/B
Cards :
- NOTEWORTHY NW288CR
- TAXAN ICD-400PN (KME KXLC002)
- NTT Personal Paldio Data Card DC-1P
- NTT Personal Paldio Data Card DC-2P
- Just Cooler for Notebook NB-100
- DATAFAB PCMMD2
# DATAFAB PCMMD2
card "DATAFAB" "PCMCIA-TO-IDE"
config 0x2 "wdc2" any
insert echo DATAFAB PCMMD2 inserted
remove echo DATAFAB PCMMD2 removed
Misc Info :
To use PCMMD2 as wdc2 on this machine with the internal CR-ROM drive, it is necessary to rebuild a kernel with a configuration below.
controller wdc2 at isa? port 0x160 bio irq 12 vector wdintr
Just Cooler(an external fan) also work well without any drivers and configurations.
[Prev][291][Next]
Name : SETA Takuji (sheta@kk.iij4u.or.jp)
Machine : Toshiba DynaBook Satellite Pro 430CDS (CPU Pentium/P54C
120MHz, HDD 1.3GB/TOSHIBA MK1301MAV, RAM 48MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-980913
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH
ATAPI_DETACH APM_BROKEN_STATCLOCK
PCIC : Intel 82365A/B
Cards :
- AIWA PV-JF3360
- Adaptec SlimSCSI APA-1460J
Misc Info :
ESS ES688 Audio Drive(SoundBlaster Pro Compatible)
default IRQ = 5 -> IRQ = 9
device sb0 at isa? port 0x230 irq 9 conflicts drq 3 vector sbintr
zzz and shutdown -x command works good.
[Prev][290][Next]
Name : Toru AKIYAMA (akiyama@ma1.seikyou.ne.jp)
Machine : SUSTEEN S-NOTE (CHANDRA NP-30J) (CPU MMX Pentium 133MHz,
HDD 1GByte, RAM 40MByte)
FreeBSD : OK (FreeBSD 2.2.7)
Pccard Pkg: PAO-snap-981102
APM BIOS : OK (1.2)
PCIC : Texas Instruments PCI1130, Ricoh RF5C296
Cards :
- BILLIONTON LNT-10TB Ethernet PCMCIA Adapter
- Ratoc REX9530
- COREGA FastEther PCC-TX
[Prev][289][Next]
Name : Masakazu Higaki (higaki@hq.kishou.go.jp)
Machine : SHARP Mebius PC-PJ1 (CPU MMX Pentium 233MHz, HDD 3GB, RAM
64MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-227-980908-snap
APM BIOS : OK (1.1)
Config Opt:
APM_PCCARD_RESUME PCIC_RESUME_RESET ATAPI_DETACH
"APM_NOSUSPEND_IMMEDIATE=3" APM_BROKEN_STATCLOCK
PCIC : Ricoh RL5C475 PCI-CardBus Brige
Cards :
- 3Com Etherlink III 3C589B
- IO DATA CBIDE bundled with CDP-FX24 (16bit mode only)
# IO Data CBIDE (bundled with CDP-FX24, etc.)
card "WIT" "IDE16"
config default "wdc1" any
insert echo IO Data CBIDE inserted
remove echo IO Data CBIDE removed
Misc Info :
hybernation and suspend is OK..
but sometimes 3C589B(ep0) is not probed after resume.
when operate PS/2 mouse after resume, kernel shows error messages:
/kernel: psmintr: out of sync (0000 != 0008).
/kernel: psmintr: out of sync (00c8 != 0008).
:
and not respond to mouse button. then uncomment
#define PSM_HOOKAPM
#define PSM_RESETAFTERSUSPEND
in /sys/i386/isa/psm.c and recompile.
using IO Data CBIDE, the dip switch on the card must be set 16bit mode.
(not probed in CardBus mode)
[Prev][288][Next]
Name : Osamu Matsuda (omatsuda@eng.hokudai.ac.jp)
Machine : Hitachi Flora Prius Note 250 NU1 (CPU MMX Pentium 166MHz,
HDD 2.1GB, RAM 32MB)
FreeBSD : OK (2.2.5-Release)
Pccard Pkg: PAO-snap-980317
APM BIOS : OK (1.1)
PCIC : PCI-1131
Cards :
- 3COM 3C589D
- Panasonic TO-CAF56K
Misc Info :
1) Disabled COM2, USB, and Sound devices.
2) Suspend does not work when the TO-CAF56K modem card is inserted.
3) Booting takes very long time (longer than 5 min) when the CD-ROM dri
ve is presented.
4) XFree86 3.3.1 runs with 1024x768 mode.
[Prev][287][Next]
Name : Yuishi Iwasaki (iwasaki@wisdom.dse.ibaraki.ac.jp)
Machine : SHARP Mebius PC-PJ1 (CPU MMX Pentium 233MHz, HDD 3.2GB
(1.3GB FreeBSD), RAM 64MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-freebsd227-980805-snap.tar.gz
APM BIOS : OK (1.1)
PCIC : Ricoh RL5C475 CardBus Controller
Cards :
- 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589"
config default "ep0" 10
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
Misc Info :
Using FIPS(ver.1.5c) to split the harddisk partitions.
Installing FreeBSD-2.2.7R from a DOS partition.
XFree86 3.3.2 with XF86_SVGA-NeoMagic128V-2.2.6R.tgz for 800x600
screen (MeoMagic) is OK.
[Prev][286][Next]
Name : Hiromichi Kawaguchi (guzi@imasy.or.jp)
Machine : NEC PC-98 mobio NX MB12C (CPU MMX Pentium 120Mhz, HDD
1.6GB, RAM 48MB)
FreeBSD : OK (FreeBSD 2.2.6R)
Pccard Pkg: PAO-980430
APM BIOS : OK (APM BIOS version 1.1)
PCIC : Cirrus Logic PD6710
Cards :
- Kingmax Technology Inc. PCMCIA K56Flex
# PCMCIA MAKER FM5600-LJ DataFax
card "PCMCIA MAKER" "FM5600-LJ DataFax"
config default "sio2" any
reset 100
insert echo PCMCIA MAKER 56K modem inserted
remove echo PCMCIA MAKER 56K modem removed
[Prev][285][Next]
Name : Kenji Suzuki (kenji@po.ganseki.ne.jp)
Machine : SONY VAIO 505G (PCG-505G) (CPU MMX Pentium 200MHz, HDD
2.1GB, RAM 64MB)
FreeBSD : OK (2.2.6R)
Pccard Pkg: 2.2.6-RELEASE (980629)
APM BIOS : OK (1.1)
PCIC : Intel 82365 (5 mem & 2 I/O windows)
Cards :
- 3Com Etherlink III 3C589D
Misc Info : See http://www.inseki.gr.jp/~kenji/vaio505/
[Prev][284][Next]
Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp)
Machine : ThinkPad 235 (Chandra II) (CPU MMX Pentium 233MHz, HDD
3.2GB, RAM 96MB)
FreeBSD : OK (2.2.7-RELEASE)
Pccard Pkg: PAO-snap-980805
APM BIOS : OK (APM 1.1 (APM 1.2 On Windows98))
PCIC : RICOH
Cards :
- Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem)
card "Xircom" "CreditCard Ethernet"
config 0x27 "sio2" any
insert echo Xircom CEM56 Card inserted as Modem
remove echo Xircom CEM56 Card removed
- TDK LAK-CD021AX
NG-Cards :
- IBM Portable Hard Disk
Misc Info :
I set PCIC mode by BIOS setup follow:
PCIC 1,2: compatible (not CARD BUS)
PCIC 3 : compatible (not ZV PORT)
USB : not use IRQ
- CEM56 dose not work as Ethernet card.
It works good as modem over 28.8k speed.
But sio driver sometimes hung with "over flow" message.
So, to use ppp without overflow, I wrote ppp.conf follow:
default:
set device /dev/cuaa2
set speed 230400
- IBM Portable Hard Disk use "IDE Card".
So I try to use it with the pccard.conf same as "IBM CD-20XSeries(IDE PC Card) "
But it dose not work.
- SUSPEND/RESUME problem
After suspend/resume, kernel warns "calcru: negative time -XXXX".
If it has happened, machine may un-stable.
It seems a bug of CPU clock get routine in apm_default_resume() of apm.c.
I add follow code for apm.c.
(you can see it in
Subject: [bsd-nomads:05690] sotec WinBookBird
Message-ID: <97Oct16.182150jst.14979@gateway.suri.co.jp>
)
and add the option "CLK_USE_I586_CALIBRATION".
Then the problem does not occur with my chandra :-)
*** apm.c.orig Tue Oct 14 11:10:04 1997
--- apm.c Thu Oct 16 12:31:32 1997
*************** apm_default_resume(void *arg)
*** 396,401 ****
--- 396,405 ----
log(LOG_NOTICE, "resumed from suspended mode\
");
}
else {
+ bootverbose = 0;
+ startrtclock();
+ cpu_initclocks();
+
/* modified for adjkerntz */
pl = splsoftclock();
inittodr(0); /* adjust time to RTC */
[Prev][283][Next]
Name : FUJIMOTO, Kou
Machine : Fujitsu FMV-5100 NL/T (CPU Pentium 100Mhz, HDD 810Mbyte,
RAM 24Mbyte)
FreeBSD : OK (2.2.6-RELEASE)
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6729
Cards :
- Megahertz XJ10BT
- 3Com EtherLink III (3C589C)
- Ricoh Flash ATA 5MB
Misc Info :
WIDE-dhcpc with Megahertz Ethernet card fails to negotiate with DHCP server
while it succeeds with 3Com EtherLink III.
Megahertz Ethernet card fails to ping to some other host with 10/100Base-TX
NIC on the same subnet.
Sound device (ESS1868) works well with Luigi's driver.
[Prev][282][Next]
Name : Toru AKIYAMA (akiyama@ma1.seikyou.ne.jp)
Machine : ThinkPad365XD (CPU Pentium 120MHz, HDD 1Gbyte, RAM 24MByte)
FreeBSD : OK (FreeBSD 2.2.6)
Pccard Pkg: PAO-snap-980720
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- BILLIONTON LNT-10TB Ethernet PCMCIA Adapter
card "Billionton" "LNT-10TB"
config default "ed0" any
insert echo BILLIONTON LNT-10TB Ethernet PCMCIA Adapter inserted
insert /etc/pccard_ether $device
remove echo BILLIONTON LNT-10TB Ethernet PCMCIA Adapter removed
remove /etc/pccard_ether_remove $devic
[Prev][281][Next]
Name : YAMAUCHI Hitoshi (yamauchi@is.uec.ac.jp)
Machine : IBM ThinkPad 600 (model:2645-51J) (CPU PentiumII 266MHz,
HDD 4GB, RAM 96MB)
FreeBSD : Tips (2.2.6 PAO)
APM BIOS : OK (APM BIOS version 1.1)
Config Opt: (none)
PCIC : TI-PCI-1250 (i82365 compatible mode)
Cards :
- Allied Telesis Ethernet LAN adapter (CentreCOM LA-PCM-T : NE2000 compatible)
Misc Info :
(I can not success the install when main memory size is
larger than 64M with boot floppy of 2.2.5, 2.2.5+PAO,
2.2.6, 2.2.6+PAO, 2.2.7.
I installed FreeBSD 2.2.6 with 32MB main memory
and rebuild kernel with option "MAXMEM=97728". 97728
means 1024 * 96 - 576. Then, shutdown and equip 32MB +
64MB memory and then, FreeBSD will be work after rebooting.)
[Prev][280][Next]
Name : Akihiro Uehara (u-akihir@ms.aist-nara.ac.jp)
Machine : PC98-NX Lavie NX LT23/44A (CPU Pentium II 233MHz, HDD
3.2GByte, RAM 64MByte)
FreeBSD : OK (2.2.6-RELEASE)
APM BIOS : OK (1.1)
Cards :
- IC-CARD Ethernet
[Prev][279][Next]
Name : Toshimitsu Miyake (miyake@nalgo.co.jp)
Machine : Panasonic Let's note CF-S21 (CPU MMX Pentium 200MHz, HDD
3.2GB, RAM 96MB)
FreeBSD : OK (FreeBSD-2.2.6R)
APM BIOS : OK (APM BIOS version 1.1)
PCIC : TI PCI-1250 [i82365 compatible mode]
Cards :
- 3Com Etherlink III PCMCIA 3C589D
- MACNICA MIRACLE SCSI-II mPS110
[Prev][278][Next]
Name : Jun KOBAYASHI (jun@nextsolution.co.jp)
Machine : FUJITSU FMV-5100NC/S (CPU Intel Pentium 100MHz, HDD 814M,
RAM 32Mbytes)
FreeBSD : NG (2.2.6R)
APM BIOS : OK (1.1)
PCIC : ed
Cards :
- Billionton LNT-10TB
# Billionton EthernetPC card
card "Billionton" "LNT-10TB"
config default "ed0" any 0x10
insert echo Billionton Ethernet Card inserted
insert /etc/pccard_ether $device
remove echo Billionton Ethernet Card removed
remove /etc/pccard_ether_remove $device
[Prev][277][Next]
Name : Takashi SHIRAI (shirai@nintendo.co.jp)
Machine : HITACHI Prius note 210g (RIOS SYSTEMS Chandra2) (CPU MMX
Pentium 166MHz, HDD 2.1GB, RAM 96MB)
FreeBSD : OK (2.2.6-Release)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
Config Opt: PCIC_IRQ=10
PCIC : RICOH RL5C475/RL5C476
Cards :
- Planet Smart COM/3500 ENW-3500-T
- Macnica Miracle SCSI-II mPS110 (for PIONEER PCP-PR1)
NG-Cards :
- IBM CD-400
(It can be used alone, but cannot be used with other cards)
Misc Info :
Recent PAO cannot use CardBus,
to change setting of BIOS from "CardBus" to "PCMCIA compatible".
But, BIOS setup is displayed with Japanese language,
then those who cannot read Japanese will not be able to setup.
When installing, you should choose "start kernel configuration..."
and make the all unnecessary devices inactive,
for killing the conflicted devices and plobing the SCSI CD-ROM.
In config file, the line as "device pcic0" must be changed,
from "irq 5" to "irq 9".
[Prev][276][Next]
Name : Kenji Yamauchi (QYL01113@nifty.ne.jp)
Machine : NEC mobio NX MB12 CUD (CPU MMX-Pentium-120MHz, HDD 1.6GB,
RAM 32MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-19980430
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6710
Cards :
- TDK Ethernet LAC-CD021BX
- NTT Personal Paldio Data Card DC-1S
[Prev][275][Next]
Name : Kazunori Aoshima
Machine : Compaq Contura aero 4/25 (CPU 486SX-25, HDD 500MHz, RAM
20MHz)
FreeBSD : OK, but some APM and serial patches needed. (2.2.5R)
Pccard Pkg: PAO-971207
APM BIOS : OK, but pathe need. (APM 1.1)
Config Opt: options "CONTURA"
PCIC : normal PCIC
Cards :
- D-Link DE-660
- IBM PCMCIA SCSI
NG-Cards :
- Contura aero PCCARD Floppydisk / Y-E data
Misc Info :
some patches needed.
2.2.6R PAO boot floppy cannnot work when install.
PCIC device isn't work.
[Prev][274][Next]
Name : Takuro Onoue (tomotaka@po.synapse.or.jp)
Machine : Caravelle Topper (CPU AMD 5x86 PR75, HDD 810MB, RAM 36MB)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
PCIC : RICOH RF5C396
Cards :
- MACNICA MIRACLE SCSI II mPS-110
- TDK3313BZ
[Prev][273][Next]
Name : Tomoyuki SUZUKA (suzuka@spa.is.uec.ac.jp)
Machine : HITACHI Flora 210 NL2 (Chandra 2) (CPU MMX Pentium 166MHz,
HDD 2.1GB, RAM 32MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
PCIC : Intel 82365 compatible
Cards :
- Planet Smart COM 3500
- Laneed Ethernet Card
- SII PHS DATA 32S
- IO DATA PCFDC2-ADP(SmartMedia adapter)
[Prev][272][Next]
Name : Yoshiaki UCHIKAWA (yoshiaki@kt.rim.or.jp)
Machine : Libretto 70/CT (CPU MMX Pentium 120MHz, HDD 1.6GB (IBM
DDLA-21620), RAM 32MHz)
FreeBSD : OK (2.2.6R)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- ELECOM Laneed LD-CDY
Misc Info :
device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr
Luigi's Sound driver(pcm0) can work.
pcm0 at 0x530 irq 5 drq 1 flags 0xa200 on isa
mss_attach <mss>0 at 0x530 irq 5 dma 1:1 flags 0xa200
[Prev][271][Next]
Name : AOYAGI Yoichi (ao@mo.cs.toyo.ac.jp)
Machine : TOSHIBA Satellite Pro 430CDT (CPU pentium 120 MHz, HDD
1.3GB, RAM 48 MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980614
APM BIOS : OK
Cards :
- CyQ've ELA-010 10BASE-T LAN Card
card "CyQ've" "ELA-010"
config default "ed0" any 0x10
insert echo CyQ've ELA-010 LAN card inserted
insert /etc/pccard_ether ed0
remove echo CyQ've ELA-010 LAN card removed
remove /sbin/ifconfig ed0 delete
[Prev][270][Next]
Name : KIZAKI Yoshio (GFG01633@nifty.ne.jp)
Machine : Toshiba Libretto30 (CPU DX4(100MHz) equivalent, HDD
1.6GB(IBM-DDLA-21620), RAM 20MB)
FreeBSD : OK (2.2.5)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- REX5536M
card "PCMCIA SCSI2 CARD" "01"
config 0x5 "stg0" any 0
insert echo REX5536M inserted
remove echo REX5536M removed
- LAK-CD021BX
[Prev][269][Next]
Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp)
Machine : MITSUBISHI apricot FX(M3484-B1C0) (CPU Pentium 120MHz, HDD
810MB, RAM 40MB)
FreeBSD : OK (FreeBSD 2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : NG (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- TDK LAK-CD021
- TDK LAK-CD021BX
Misc Info :
While installing I disabled the sound device.
Executing apm command makes panic.
But can suspend with suspend button(not apm -z).
Cannot power off with shutdown -x.
Sound device was set with BIOS to use I/O address to 0x220-, irq to 9,
8bit DMA to 1 and 16bits DMA to 5.
[Prev][268][Next]
Name : Susumu Harano (harano@astec.co.jp)
Machine : Libretto 100CT PA1254C9 (CPU Pentium MMX 166MHz, HDD
2.1GB, RAM 32MB+32MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980430
APM BIOS : OK
PCIC : Intel 82365
Cards :
- Corega Ether PCC-T
[Prev][267][Next]
Name : Ken Seggerman (suleyman@echonyc.com)
Machine : Toshiba Satellite 305CDS (CPU Pentium 486, HDD 1.51 GB
(1547 MB Windows95 PriDOS 496 MB FreeBSD, 16 MB ExDOS),
RAM 80 MB)
FreeBSD : No problem, Installed from CD and re-installed from
PAO-boot.flp (Version number of FreeBSD)
Pccard Pkg: PAO-boot.flp for 2.2.5
APM BIOS : No problem
PCIC : Toshiba ToPIC97 CardBus Controller
NG-Cards :
- Copied "Xircom" "CreditCard Modem Ethernet" section from
pccard.conf.sample, and altered product string to match
probed string "Xircom" "CreditCardModem CM-56T"
but does not work. Error: pccard[41] no card on database...
Xircom CreditCard Modem CM-56
I tried changing the card line in conf to match
my modem, and tried it the original way.
I left everything else alone. User PPP accessed the
modem without complaint, there was no dial tone, the
lights on the modem cable dongle did not light up and
User PPP reported: dial failed
Misc Info :
I was very encouraged to see an entry in the
pccard.conf.sample for a Xircom Modem, but could not get it to
work. I am about to give up and get myself another modem for the
laptop. Any advice would be welcome.
Thank you.
[Prev][266][Next]
Name : Ryusuke Kikuchi (kikuchi@grad.sccs.chukyo-u.ac.jp)
Machine : Panasonic Let's note AL-N2T520J5 (CPU MMX Pentium 200MHz,
HDD 2.1GB, RAM 32MB)
FreeBSD : OK (2.2.6-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- Telecom Device SuperSocket RE450T
card "Telecom Device K\\.K\\." "SuperSocket RE450T"
config 0x2 "ed0" any
# ether 0x110 09:57:42
insert echo Telecom Device SuperSocket RE450T inserted
insert /etc/pccard_ether $device
remove echo Telecom Device SuperSocket RE450T removed
remove /etc/pccard_ether_remove $device
- Adaptec SlimSCSI
[Prev][265][Next]
Name : kondo hiroshi (kondo@csctk.jcsnet.ro.jp)
Machine : FMV-5133NP5/W (CPU Pentium-133, HDD 1.2G, RAM 32M)
FreeBSD : OK (FreeBSD2.2.6-RELEASE)
PCIC : TI PCI-1130
Cards :
- 3C589C
- 3C589D-COMBO
[Prev][264][Next]
Name : namiki takeo (namiki@din.or.jp)
Machine : Toshiba Libretto-20 (CPU AMD Am486DX4/75MHz, HDD 258MB,
RAM 16MB (8+8))
FreeBSD : OK (2.2.6)
Pccard Pkg: boot-ja-pao-980517.flp
APM BIOS : OK
Cards :
- NEC PC-9801N-J03
- Megahertz XJ10BT
[Prev][263][Next]
Name : Katsuhiro OGUCHI
Machine : PC-9821 la10 (CPU Intel Pentium 100MHz, HDD 810M, RAM 40MB)
FreeBSD : OK (2.2.1)
APM BIOS : OK (1.11)
Cards :
- REX-5535
[Prev][262][Next]
Name : Tatsuya TANIKAWA (tanikawa@fs.kyoto.omronsoft.co.jp)
Machine : TOSHIBA DynaBook SS-R 575 (CPU Pentium 75MHz, HDD 2067MB /
TOSHIBA MK2103MAV, RAM 40MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.0 compatible mode)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH
PCIC : Intel 82365 (or clones)
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460
- D-link DE-650 Ethernet Card
- Microtech XpressDock
# Microtech XpressDock
card "Microtech International Inc\\." "IDE PCCARD"
config default "wdc1" any
cardio 0x170 0x10
insert echo Microtech XpressDock inserted
remove echo Microtech XpressDock removed
[Prev][261][Next]
Name : Shinji Kitamoto (skitamoto@odp.co.jp)
Machine : SHARP MN-5100D (CPU Pentium 133, HDD 1.4GB, RAM 32MB)
FreeBSD : OK (2.2.6)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6729/6730
Cards :
- 3Com 3C589D
- Accton EN2216
[Prev][260][Next]
Name : Hiroshi Kawakubo (hiroshi.kawakubo@nifty.ne.jp)
Machine : SONY VAIO PCG-505EX (CPU MMX Pentium 233MHz, HDD 2.1GB,
RAM 32MB)
FreeBSD : OK (2.2.6-RELEASE)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- Adaptec SlimSCSI APA-1460A
[Prev][259][Next]
Name : Noriyuki KOIZUMI (fwih8471@mb.infoweb.ne.jp)
Machine : Toshiba Libretto 50 (CPU Pentium 75MHz, HDD 1.6GB, RAM
32MB)
FreeBSD : OK (FreeBSD-2.2.6-RELEASE)
Pccard Pkg: PAO-980430
APM BIOS : OK (1.1)
Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH,
APM_NOSUSPEND_IMMEDIATE=3, APM_BROKEN_STATCLOCK
PCIC : Intel 82365 (or clones)
Cards :
- 3Com 3C589C
- U.S. Robotics XJ5560
- NTT Personal Paldio Data Card DC-1P
- Adaptec SlimSCSI APA-1460AJ
- Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem)
card "Intel" "EtherExpress\\(TM\\) PRO/100 LAN/Modem PC Card Adapter"
config 0x1f "sio2" any
insert echo Intel EtherExpress PRO/100 LAN/Modem as Modem
remove echo Intel EtherExpress PRO/100 LAN/Modem
[Prev][258][Next]
Name : Hiroaki Goto (gorry@shonan.ne.jp)
Machine : TOSHIBA Libretto 50 (CPU Pentium 75MHz, HDD 800MB, RAM
32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- ICM PSC-2401 (SCSI card)
- corega Ether PCC-T
card "corega K.K." "corega Ether PCC-T"
config default "ed0" any
insert echo corega Ether PCC-T
insert /etc/pccard_ether $device
remove echo corega Ether PCC-T removed
remove /etc/pccard_ether_remove $device
[Prev][257][Next]
Name : Robert S. Hibi (hibi@med.kurume-u.ac.jp)
Machine : Chandler (Frontier Kojiro) (CPU Pentium 120MHz, HDD 800MB,
RAM 64MB (+ alpha))
FreeBSD : OK (2.2.5-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82635 (or clones)
Cards :
- 3Com Etherlink III 3C589D
- adaptec SlimSCSI
Misc Info :
Just a thing necessary for the installation was
to imput "flags npx0 0x01" and "quit" in UserConfig
CLI mode. -> Thanks Tatsumi.
[Prev][256][Next]
Name : Motomichi Masuzaki (mzaki@e-mail.ne.jp)
Machine : Libretto 70 (CPU Pentium MMX 120MHz, HDD 1.6G, RAM 32M)
FreeBSD : needs some tips described below (2.2.5)
APM BIOS : OK (1.1)
Cards :
- Panasonic LK-RM864D
- SuperSocket RE-450T
- SII MC-6530
- PLANET COMMUNICATIONS ENW-3501-T
[Prev][255][Next]
Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp)
Machine : SONY VAIO PCG-505X (CPU Intel Pentium MMX 166MHz, HDD 2GB,
RAM 32MB)
FreeBSD : OK (2.2.5R)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- TDK LAK-CD021AX
- Adaptec SlimSCSI(APA-1460J)
[Prev][254][Next]
Name : Ken-ichi Suzuki (ksuzuki@miyagi-ct.ac.jp)
Machine : TOSHIBA Libretto 30 (CPU 486DX4(100MHz), HDD 1.6MB, RAM
16MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET
Cards :
- Relia PCMCIA Ethernet Adapter
card "PCMCIA LAN" "Ethernet"
config default "ed0" any
insert echo Relia PCMCIA LAN inserted
insert /etc/pccard_ether $device
remove echo Relia PCMCIA LAN removed
remove /etc/pccard_ether_remove $device
- Megahertz 56k pccard modem CC1560J
[Prev][253][Next]
Name : Mori Takusi (tak_mori@kh.rim.or.jp)
Machine : SOTEC WinBook Bird S3P133 (CPU Pentium 133MHz, HDD 776MB
(680MB: FreeBSD, 96MB:DOS), RAM 48MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: Boot PAO flp (version: 971211?) -- I get it 03/97 from
http://www.jp.freebsd.org/PAO/
APM BIOS : ? -- After resumption from suspending, CPU speed becomes
very slowly. (1.1)
Config Opt: none (I used default PAO config)
Cards :
- KME SCSI PCMCIA (KXLC002)
# KME (TAXAN ICD-400PN, etc.)
card "KME" "KXLC002"
config 0x24 "ncv0" any 0xb4d00000
insert echo KME SCSI PCMCIA Card inserted
remove echo KME SCSI PCMCIA Card removed
Misc Info :
First, from DOS partition, I installed /bin ,/compat* and /src/sys
with Boot PAO flp, and compiled & installed PAO kernel, and edit
/etc/pccard.conf. Then (after reboot), form CDROM which is connected
to PCMCIA SCSI card, I could instrall the rest.
[Prev][252][Next]
Name : Takafumi Yabunaka (yabunaka@mb.infoweb.ne.jp)
Machine : Fujitsu FMV-475NL/S (CPU i486DX 75MHz, HDD 1.3GB / Toshiba
MK1301MAV, RAM 24MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.0)
PCIC : Cirrus Logic PD-6710
Cards :
- 3Com EtherLink III LAN PC Card 3C589D
- Megahertz Ethernet LAN Adapter XJ10BT
- Telecom Device Super Socket RE450T
# Telecom Device SuperSocket RE450T
card "Telecom Device K.K." "SuperSocket RE450T"
config 0x3 "ed0" any
insert echo Telecom Device SuperSocket RE450T inserted
insert /etc/pccard_ether $device
remove echo Telecom Device SuperSocket RE450T removed
remove /etc/pccard_ether_remove $device
- TDK Data/Fax Modem DF2814B/M
- KYOEI DATA/FAX MODEM S-336FM
# KYOEI CO., LTD. SHURIKEN FAX MODEM S-336FM
card "KYOEI CO., LTD." "S-336FM"
config 0x23 "sio2" any
reset 1000
insert echo KYOEI SHURIKEN MODEM inserted
remove echo KYOEI SHURIKEN MODEM removed
- OMRON Data/Fax Modem ME3314C-D
# OMRON Data/Fax Modem ME3314C-D
card "OMRON" "Modem w DPI ME3314C-D"
config 0x23 "sio2" any
reset 1000
insert echo OMRON Data/Fax Modem ME3314C-D inserted
remove echo OMRON Data/Fax Modem ME3314C-D removed
- TDK ISDN Adapter DN1280
# TDK ISDN Adapter DN1280
card "TDK" "DN1280"
config 0x22 "sio2" any
reset 1000
insert echo TDK ISDN Adapter DN1280 inserted
remove echo TDK ISDN Adapter DN1280 removed
- NTT DoCoMo Digital Data/Fax 9600 Mark II
- NTT DoCoMo Personal Paldio Data Fax Card DC-1S
## NTT Personal Paldio Data Card DC-1S
card "NTT Personal" "Paldio Data/Fax Card" "DC-1S"
config 0x22 "sio3" 11 0x40000
insert echo NTT Personal Paldio Data Card DC-1S inserted
remove echo NTT Personal Paldio Data Card DC-1S removed
- NTT DoCoMo Personal Paldio Data Fax Card DC-2N
- SII PHS DATA 32S MC-6530
# SII PHS DATA 32S MC-6530
card "SII" "PHS DATA 32S"
config 0x23 "sio2" any
insert echo SII PHS DATA 32S inserted
remove echo SII PHS DATA 32S removed
[Prev][251][Next]
Name : Ibrahim Korpeoglu (korpe@cs.umd.edu)
Machine : Dell Latitude XPi CD (CPU Pentium 150 Mhz, HDD 1.443 GB,
RAM 32 MB)
FreeBSD : OK (2.2.2)
Pccard Pkg: PAO package for 2.2.2
APM BIOS : OK
Config Opt: Machine-depend "options" in config file
PCIC : TI PCI-1131 CardBus Controller
Cards :
- 3Com EtherLink-III 3C589D
- Lucent WaveLAN PCMCIA Wireless Card
Misc Info :
- wlp0 can not be started automatically
[Prev][250][Next]
Name : Koji Mochizuki (k-mochy@tb3.so-net.ne.jp)
Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.2GM, RAM
40MB)
FreeBSD : OK (2.2.5-Release)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- Adaptec SlimSCSI APA-1460
- TDK DF2814B/M
- D-Link DE-650 Ethernet Card
- Kingston KNE-PCM/x Ethernet
[Prev][249][Next]
Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu, Tokyo-Rika
Daigaku.) (sakai@miya3f01.ee.kagu.sut.ac.jp)
Machine : Dell Latitude CP M166ST (CPU MMX-Pentium 166MHz, HDD 4.0GB
(1.6G:Win95, 1.3G:FreeBSD (40M:/, 80M:swap, 32M:/var,
1120M:/usr), 570M:reserved for Linux, 510M:/home (for
FreeBSD & Linux)), RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET
APM_NOSUSPEND_IMMEDIATE=3 PCIC_TI113X_FUNC
PCIC : TI PCI1 131 CardBus
Cards :
- Logitec LPM-LN20T (Ethernet Card)
[Prev][248][Next]
Name : Hiroshi Tanaka (te194096@cse.ec.kyushu-u.ac.jp)
Machine : TOSHIBA DynaBook SS450 (CPU i486SX2 50MHz, HDD 340MB, RAM
8MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-ready FreeBSD Installation Floppy
APM BIOS : OK (1.0)
PCIC : Intel 82365(or clone)
Cards :
- D-link DE-660
[Prev][247][Next]
Name : HONDA Yasuhiro (honda@kashio.info.mie-u.ac.jp)
Machine : Sony VAIO PCG-729 (CPU MMX Pentium 266MHz, HDD 4GB, RAM
64MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: PCIC_TI113X_FUNC
PCIC : TI PCIC-1131 PCMCIA/CardBus bridge
Cards :
- 3Com 3C589D-J-TP
[Prev][246][Next]
Name : Masataka Okubo (okubo@mbox.kyoto-inet.or.jp)
Machine : Toshiba Libretto60CTA (CPU Pentium 100MHz, HDD 777MB
(Toshiba MK0803MAT), RAM 16MB)
FreeBSD : OK (2.2.5-Release)
Pccard Pkg: PAO-2.2.5-Release
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET
PCIC : Intel 82365
Cards :
- IBM PCMCIA SCSI Card
- AI Brain PCMCIA Type2 Ethernet Adapter (CeLAN EPCMCIA-T PnP)
NG-Cards :
- SOTEC MU-2000 (SCSI CD-ROM Adapter)
- Globalvilalge PowerPort Platinum Pro (For macintosh :-))
[Prev][245][Next]
Name : Kouji SATO (skouji@isl.melco.co.jp)
Machine : MITSUBISHI Pedion M3041 (CPU MMX Pentium 233MHz, HDD 1GB,
RAM 64MB)
FreeBSD : FTP install using boot.flp included in
2.2.1R-distribution. (2.2.5R)
APM BIOS : OK (1.1)
Config Opt: LAPTOP PCIC_TI113X_FUNC
PCIC : TI PCI-1131 PCMCIA/CardBus Bridge
Cards :
- 3Com 3C589B (Ethernet)
card "3Com Corporation" "3C589"
config default "ep0" 10
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
- TDK DF2814B/M (Modem)
card "TDK" "DF2814.*"
config 0x22 "sio2" 5
reset 1000
insert echo TDK 28.8K modem inserted
remove echo TDK 28.8K modem removed
- NTT DoCoMo PCMCIA DATA/FAX Adapter (96P1)
card "NTT DoCoMo" "PCMCIA DATA/FAX.*"
config 0x22 "sio2" 5
insert echo TDK 28.8K modem inserted
remove echo TDK 28.8K modem removed
[Prev][244][Next]
Name : M. Meiarashi (------)
Machine : Toshiba Portege 620CT (US version) (CPU Pentium 100MHz,
HDD 2GBytes (TOSHIBA MK2103MAV), RAM 40MBytes)
FreeBSD : OK (2.2.5)
Pccard Pkg: PAO-19971211
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- NTT DOCOMO DATA/FAX CARD 9600 MarkII
- NTT MOBILE DP CARD 2896 P DIGITAL (as modem)
- Planet SmartCom CreditCard 2000
- IBM Smart Caputre Card II
- AIWA PV-JF288
- Adaptec Slim SCSI
Misc Info :
On the above mentioned DoPa-enabled card; It worked with "data mode."
No test has been made for "packet mode."
[Prev][243][Next]
Name : Kaoru Imuta (imu@ff.iij4u.or.jp)
Machine : SONY vaio PCG-505 (CPU MMX Pentium 133MHz, HDD 1GByte, RAM
60Mbyte)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365 or clones
Cards :
- NTT DoCoMo Mobile Data Card 96P1
config 0x23 "sio2" any
[Prev][242][Next]
Name : Imai Kiyosi (imai@frei.cs.uec.ac.jp)
Machine : Libretto 70CT PA1260C9 (CPU Pentium MMX 120MHz, HDD 1.6G,
RAM 32M)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Cards :
- ELECOM Laneed LD-CDY
[Prev][241][Next]
Name : Tetsushi Nakai (-----)
Machine : IBM ThinkPad 535E (CPU MMX Pentium 150 MHz, HDD 1.6G, RAM
48M)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: PCVT_SCANSET=2
PCIC : Cirrus Logic PD-6729/6730
Cards :
- D-Link 650-T Ethernet
- Adaptech SlimSCSI APA-1460A
[Prev][240][Next]
Name : Ryo MIYAMOTO (rmiya@cc.hirosaki-u.ac.jp)
Machine : TOSHIBA Libretto 70 CT (CPU MMX Pentium 120MHz, HDD 1.6GB
(1GB for FreeBSD, 500MB for Win95, 30MB for Hibernation ),
RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: Default for PAO, such as: LAPTOP, APM_PCCARD_RESUME,
PCIC_RESUME_RESET, SCSI_DETACH, APM_NOSUSPEND_IMMEDIATE=3,
SCSI_LOW, APM_BROKEN_STATCLOCK
PCIC : Intel 82365 (or clones)
Cards :
- MELCO IFC-DC
- Logitec LPM-LN20T
Misc Info :
* Hibernation mechanism works very good by zzz command, power button, and closing LCD panel.
* `Logitec LPM-LN20T' works as:
pccardd[38]: Card "Logitec"("LPM-LN20T") matched "Logitec" ("LPM-LN20T")
ed0: address xx:xx:xx:xx:xx:xx, type NE2000 (16bit)
* `MELCO IFC-DC' works as:
pccardd[38]: Card "RATOC System Inc."("SCSI2 CARD 37") matched "RATOC System Inc." ("SCSI2 CARD.*")
probe ncv
attach ncv
ncv0: try to reset scsi bus
...
[Prev][239][Next]
Name : Greg Minshall (minshall@fiberlane.com)
Machine : IBM ThinkPad 560x (CPU 233 MHz Pentium, HDD 4GB, RAM 32MB)
FreeBSD : Installed fine. (2.2.5.)
Pccard Pkg: PAO-971211
APM BIOS :
Doesn't "just work". I haven't tried to see what to do to make
it work.
Cards :
- 3COM 3C589.
- IBM IDE PC Card (for 20X CDROM)
[Prev][238][Next]
Name : TAKABA Toshiharu
Machine : digital HiNote Ultra II (CTS5120) (CPU Pentium 120MHz, HDD
2 G Bytes, RAM 40 M Bytes)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (APM BIOS version 1.1)
PCIC : Cirrus Logic PD672X
Cards :
- 3Com EtherLink III 3C589C
Misc Info :
Not work MicroDock PCMCIA-IDE Interface card
(MICROTECH INTERNATIONAL, INC.)
[Prev][237][Next]
Name : Junya Nakata (tarou@cc.tuat.ac.jp)
Machine : ThinkPad370C (CPU DX4 75MHz, HDD 540MB (FreeBSD only), RAM
4MB+16MB=20MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET,
APM_BATT_LOW_SUSPEND, APM_NOSUSPEND_IMMEDIATE=3
PCIC : Intel 82365 (or clones) (5 mem & 2 I/O windows)
Cards :
- IBM Creditcard Ethernet II
Misc Info :
TrackPointII is recongnized as PS/2.
And working modeline is following.
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
[Prev][236][Next]
Name : Hiroshi Takeuchi (takeuchi@bear.aero.cst.nihon-u.ac.jp)
Machine : Toshiba Portege 300CT 1.6 (US Version) (CPU MMX-Pentium
133MHz, HDD 1.6GB, RAM 64MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.2(Recognized as 1.1))
PCIC : ToPIC(Toshiba Propietary)
Cards :
- Adaptec SlimSCSI APA-1460J
- Adaptec SlimSCSI APA-1460A
- Accton EN2212 Ethernet
- TDK LAK-CD021AX Ethernet
- Megahertz XJ3288 FAX/Modem
card "Megahertz" "XJ3288-81"
config 0x23 "sio1" any
insert echo Megahertz XJ3288-J Modem inserted
remove echo Megahertz XJ3288-J Modem removed
- IBM SmartCaptureCard II
Misc Info :
Needs to set BIOS PC-Card Mode to PCIC Compatible mode.
Resume does NOT work well WITHOUT sound devices(sb0,opl0) config.
Toshiba CD-ROM Dock works fine.
[Prev][235][Next]
Name : Sugimoto Sadahiro (g640678@komaba.ecc.u-tokyo.ac.jp)
Machine : SHARP Mebius MN-5500 (CPU MMX Pentium 150MHz, HDD 1.6GB
(Win95:800MB, FreeBSD:700MB), RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
APM BIOS : OK (1.1)
Config Opt: options "PCIC_TI113X_FUNC"
PCIC : TI PCI-1131 CardBus Controller
Cards :
- RATOC REX-9530 (SCSI-2)
irq 7 11
- IO-DATA PCLA/T (Ethernet)
Misc Info : I can not use "IRQ 10" for pccard.
[Prev][234][Next]
Name : Kodama Syuji (kodama@po.cmp-lab.or.jp)
Machine : Canon INNOVA 3600 (CPU MMX Pentium, HDD 1.2GB, RAM 320MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : FORCE_APM10 (1.1)
Config Opt:
device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr
device opl0 at isa? port 0x38a
PCIC : TI PCI-1130 CardBus Controller
[Prev][233][Next]
Name : Shuichi NAKAMURA (shuzo@cis.canon.co.jp)
Machine : COMPAQ CONTURA AERO 4/33C (CPU i486SX 33MHz, HDD 1.3GB,
RAM 20MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211(OK)
APM BIOS : OK (1.1)
Config Opt: LAPTOP CONTURA COM_IRQ_BUG APM_PCCARD_RESUME
PCIC_RESUME_RESET "APM_BATT_LOW_SUSPEND"
"APM_NOSUSPEND_IMMEDIATE=3"
PCIC : VLSI 82C146
Cards :
- 3Com EtherLINK III(3C589B)
card "3Com Corporation" "3C589"
config default "ep0" any
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
insert /sbin/ifconfig $device inet 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255
insert /sbin/route add default 192.168.0.1
remove echo 3Com Etherlink III removed
remove /sbin/route delete default
remove /sbin/ifconfig $device down
remove /etc/pccard_ether_remove $device
Misc Info :
In detail, see
http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/install.htm
http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/reconfig.htm
(sorry but, in Japanese)
Enjoy!
[Prev][232][Next]
Name : YOSINAGA, Naritosi (honey@tka.att.ne.jp)
Machine : Panasonic Let's note mini AL-N4T512J5 (CPU MMX Pentium
120MHz, HDD 1.6GB, RAM 80MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Ricoh RL5C476
Cards :
- D-Link DE-660 Ethernet Card
- TDK DF5600
Misc Info : TDK DF5600 hangs by apm -z
[Prev][231][Next]
Name : Yoshinobu Inoue (-----)
Machine : Panasonic Let's Note AL-N4T512J5 (CPU MMX Pentium 120MHz,
HDD 1.6GB (1GB:FreeBSD, 400MB:win95, 100MB:hybernation),
RAM 16MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: no change from default
PCIC : ??
Cards :
- 3Com Etherlink III 3C589D
- TDK DF5600/J DATA/FAX Modem
Misc Info :
suspend/resume and hybernation/resume is OK when 3Com PCCARD is
set. There is small problem for suspend/hybernation when TDK PCCARD is
set. It is that the machine freeze 45 to 50 seconds after
suspend/hybernation, but after that it successfully suspend/hybernate.
However, if someone resumes, it suddenly begins hybernation again. And
next resume will success. But sometimes PCCARD is not recognized at
the 2nd resume. If you unset and set it, then it is recognized.
And as other information, I tried a BIOS confuguration that power off
PCCARD between suspend, and that also seems to be OK. XFree86 worked
at VGA resolution with Chipset NeoMagic configuration. Acceralated X
also worked at 800x600 and color depth 16. The hardware hot keys, "Fn"
+ ”F1-F10" also worked under FreeBSD and it can control display,
speaker, low electricity mode, hybernation, battery left, etc.
[Prev][230][Next]
Name : Kayoko, Okamoto (okamoto@mach.kokusaidenki.co.jp)
Machine : ThinkPad 560 (CPU Pentium-100MHz, HDD 2.1G(Windows95
500MB, FreeBSD 1600MB), RAM 24MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.2)
PCIC : Cirrus Logic PD6729
Cards :
- TDK Ethernet LAC-CD021AX
- Adaptec SlimSCSI APA-1460J
- TDK DF3314E
- Sicon Peripheral PCMCIA ATA/ATAPI Adapter
card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter"
config default "wdc1" any
insert echo Sicon Peripherals inserted
remove echo Sicon Peripherals removed
[Prev][229][Next]
Name : Shun-ichi Kobayashi (koba@nakisuna1.kuciv.kyoto-u.ac.jp)
Machine : NEC mobio NX MB12C (CPU MMX Pentium 120 MHz, HDD 1.6GB /
IBM DDLA-21620, RAM 32MB)
FreeBSD : OK (2.2.2-RELEASE)
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6710
Cards :
- Buffalo IFC-DC2 (SCSI2)
aic0 (Adaptec APA-1460)
[Prev][228][Next]
Name : Mark Andres (mark@giganet.net)
Machine : IBM Thinkpad 220 (CPU i386SL 16Mhz, HDD 1.4GB, RAM 10MB)
FreeBSD : OK (3.0-current)
APM BIOS : OK (?)
Config Opt: LAPTOP
PCIC : Intel 82365
Cards :
- 3Com Etherlink 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "ep0" 10
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0 link0 -link1
insert /sbin/route add default 10.0.0.1
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
NG-Cards :
Megahertz XJ1144
Misc Info :
I have X running, but very slowly. See my homepage for my TP220 at
http://www2.giganet.net/~mark/FreeBSD/tp220.html
[Prev][227][Next]
Name : Yoshisuke Kato (kato@msa.co.jp)
Machine : SHARP Mebius MN-5500 (CPU MMX Pentium-150MHz(OverClock
200MHz), HDD 1.6GB, RAM 64MB)
FreeBSD : OK (2.2.5-RELEASE + PAO-971211)
APM BIOS : OK (1.1)
PCIC : TI PCI1131
Cards :
- Megahertz XJ10BT
- IO-DATA PC-INS128 (ThunderCard DD1280 Firmware ver1.5)
# NTT-IT ThunderCard
card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128"
config 0x22 "sio2" any 0x80
reset 1000
insert echo Thunder-card inserted
remove echo Thunder-card removed
- REX 5535 SCSI
- TDK DF1414 MODEM
[Prev][226][Next]
Name : ABE Masayuki (pzr@kw.netlaputa.ne.jp)
Machine : HITACHI FLORA-NL1 (CPU Pentium(100MHz), HDD 1GB(TOSHIBA
MK1004MAT), RAM 40MB(HAGIWARA SYS-COM HSC-HA3032K))
FreeBSD : tips: can't use IRQ 10 with slot 0, 1
(FreeBSD-2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : ctlr(0) TI PCI-1130 [i82365 compatible mode], ctlr(1)
Intel 82365 (or clones)
Cards :
- IBM Double Jack Modem(Data 28.8/Fax14.4)
- IBM SCC II (with xscc-0.21)
- PCI ENW-3500
- 3Com 3c589B
- INTEGRAL PERIPHERALS Viper 340
[Prev][225][Next]
Name : Hidetoshi Yanai (yanai@trcj.kao.co.jp)
Machine : Panasonic Let'sNote AL-N2 (CPU MMX Pentium 150MHz, HDD
1.6GB (800MB:FreeBSD, 800MB:win95), RAM 64MB)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
Cards :
- 3Com Etherlink III 3C589D
- adaptec SlimSCSI CE
[Prev][224][Next]
Name : Kato Daisuke (katodai@taka.ee.titech.ac.jp)
Machine : SOTEC Winbook SC (CPU 486SX 33MHz, HDD 240MB, RAM 8MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971206
APM BIOS : OK (1.0)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET
APM_NOSUSPEND_IMMEDIATE=3
PCIC : Cirrus Logic PD672X
Cards :
- MELCO LPC-T
[Prev][223][Next]
Name : NABETANI Masaki (pxp14205@niftyserve.or.jp)
Machine : TOSHIBA TECRA720CDT/2.1 (CPU Pentium 133MHz, HDD
2.0GB(1.0GB for FreeBSD), RAM 48MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971206
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- IBM SCSI PCMCIA Card
[Prev][222][Next]
Name : Tatsumi Hosokawa (hosokawa@jp.FreeBSD.org)
Machine : Libretto 50CT US version (CPU Pentium 75MHz, HDD 1.6GB /
IBM DDLA-21620, RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971201
APM BIOS : OK (1.1)
PCIC : 82365 compatible
Cards :
- Megahertz XJ-10BT
- Planet SmartCOM 3500
- Telecom Device SuperSocket RE450T
- IBM Creditcard Ethernet II
- Motorola Marine multifunction card (as modem)
- NTT-IT ThunderCard AVF288
- Adaptec SlimSCSI APA-1460
- Epson Flash Packer 10MB
- Integral Peripherals VIPER 340
- GREYSTONE DiskDock
- I/O DATA CDP-TX6
- I/O DATA CDP-TX10
- Panasonic LK-RM120
NG-Cards :
- Pioneer PCP-PW1W
Misc Info :
You have to keep last 34 megabytes of the drive as "unused" fdisk area
to use as hybernation area. You'll see the incredible tragedy without
it when you suspend the system :-).
[Prev][221][Next]
Name : Koichi Koibuchi (buchi@sum.elec.keio.ac.jp)
Machine : Toshiba Libretto50 CT (US) (CPU Pentium 75MHz, HDD 1.6GB,
RAM 32MB)
FreeBSD : OK (2.2.2-R)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH
APM_NOSUSPEND_IMMEDIATE=3
PCIC : Intel 82365 (or clones)
Cards :
- 3Com Etherlink III 3C589C
- Adaptec SlimSCSI APA-1460A
- NTT DoCoMo PCMCIA DATA/FAX Adapter MarkII
- TDK DF5600/J DATA/FAX Modem
[Prev][220][Next]
Name : Koichi Koibuchi (buchi@sum.elec.keio.ac.jp)
Machine : AKIA Tornado 513V (CPU Pentium 133MHz, HDD 1.3GB, RAM 40MB)
FreeBSD : OK (2.2.2-R)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH
APM_BATT_LOW_SUSPEND APM_NOSUSPEND_IMMEDIATE=3
PCIC : Cirrus Logic PD6729
Cards :
- 3Com Etherlink III 3C589C
- Adaptec SlimSCSI APA-1460A
- NTT DoCoMo PCMCIA DATA/FAX Adapter MarkII
- TDK DF5600/J DATA/FAX Modem
Misc Info :
zzz fails when TDK DF5600/J is plugged in.
[Prev][219][Next]
Name : Hirokazu Fujioka (h-fujioka@m2.people.or.jp)
Machine : NEC PC-9801NS/A (CPU i486SX 33MHz(ODP i486DX4 100MHz), HDD
500M, RAM 14336K bytes)
FreeBSD : OK (FreeBSD(98)2.2.1R)
Pccard Pkg: PAO-970331+PAO-970331-pc98-970721
APM BIOS : OK (APM BIOS version 1.3(NEC))
PCIC : PC-Card PC98 Original
Cards :
- -TDK DF1414EX DATA/FAX MODEM
#For NEC PC9801NS/A
# Generally available IO ports
io 0x240-0x2e0
# Generally available IRQs
irq 5
# Available memory slots
memory 0xda000 96k
# Modem Cards
# TDK 14.4K modem series
card "TDK" "DF1414.*"
config 0x30 "sio1" any
reset 1000
insert echo TDK 14.4K modem inserted
remove echo TDK 14.4K modem removed
- -Motorola MONTANA V.34 FAX/MODEM
# MOTOROLA 28.8K modem
card "Motorola" "MONTANA*"
config 0x23 "sio1" any
reset 1000
insert echo Motorola 28.8K modem inserted
remove echo Motorola 28.8k modem removed
[Prev][218][Next]
Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp)
Machine : Toshiba DynaBook SS475 (CPU Intel 486DX75, HDD 500MBytes,
RAM 32M)
FreeBSD : OK (2.2.5R)
Pccard Pkg: PAO-9706016
APM BIOS : OK (1.0)
PCIC : Intel 82365
Cards :
- Adaptec Slim SCSI
- TDK LAK-CD021
[Prev][217][Next]
Name : Hideki Sakamoto (sakamoto@hlla.is.tsukuba.ac.jp)
Machine : DEC digital HiNote Ultra II (CPU P5-120, HDD 2GB, RAM 40MB)
FreeBSD : OK (2.2.1-R)
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- Adaptec SlimSCSI APA-1460J
- APEX Data MultiCard (as Modem)
- TDK LAK-CD021AX
- PCM250AM (2.5" HDD case and PCMCIA card)
# PCM250AM 2.5in HDD adapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
config 0xd "wdc1" any
insert echo PCM250AM inserted
remove echo PCM250AM removed
Misc Info : PCM250AM don't work with irq=15.
[Prev][216][Next]
Name : Hadime Watanabe (h_nabe@kt.rim.or.jp,
h_nabe@mars.hby.toshiba.co.jp)
Machine : Toshiba DynaBook TECRA 510CT (CPU Pentium 133MHz, HDD
2.1GB(Win95:0.8GB, FreeBSD:1.3GB), RAM 48MB(16+32))
FreeBSD : OK (2.2.2-Release)
APM BIOS : OK(Maybe) (1.1)
Config Opt: LAPTOP
PCIC : Intel 82365 (or clones)
Cards :
- Toshiba Joho System PTJ-LAN/T
# TJ Ethernet card (NE2000 clone?)
card "TJ" "Ethernet"
config default "ed0" any 0x10
insert echo TJ Ethernet card inserted
insert /etc/pccard_ether $device
insert /sbin/ifconfig $device inet XXX.XXX.XXX.XXX netmask 255.255.255.0
insert /sbin/route add default YYY.YYY.YYY.YYY
remove echo TJ Ethernet card removed
remove /sbin/ifconfig $device down
remove /etc/pccard_ether_remove $device
[Prev][215][Next]
Name : Regis Rampnoux (regisr@pobox.com)
Machine : Texas Instruments / Extensa 560 CD (CPU Pentium 75MHz, HDD
1.2 Go, RAM 40MB)
FreeBSD : OK (2.2.2)
Pccard Pkg: 970616 release
APM BIOS : Working (1.1)
Cards :
- 3C589C Etherlink III
- Adaptec APA 1460A SCSI
Working with HP DAT.
Not working with iomega devices (ZIP/JAZ)
Misc Info :
XFree86 3.3.1
/etc/pccard_ether modified to add alias address.
[Prev][214][Next]
Name : TOMOyuki sasaki (tsasaki@onbiz.net)
Machine : Panasonic Let's Note AL-N2 T516J5 (CPU Pentium MMX 166MHz,
HDD 2GB, RAM 96MB)
FreeBSD : OK (2.2.2-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- NTT Personal Paldio DataFAX Card
card "NTT Personal" "Paldio DataFAX Card"
config 0x13 "sio3" any
insert echo NTT Personal Paldio DataFax Card inserted
remove echo NTT Personal Paldio DataFax Card removed
- 3Com Corporation 3C589D
[Prev][213][Next]
Name : George V. Neville-Neil (gnn@wrs.com)
Machine : Toshiba Satellite Pro 440CDX (CPU Pentium 133, HDD 2 Gig,
RAM 32 Meg)
FreeBSD : Up and running (2.2.2)
APM BIOS : Yes (1.1)
PCIC : PC-Card Intel 82365
Cards :
- 3Com Etherlink III 3C589C
config 0x1 "ep0" 11
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0 -link0 link1
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
- Megahertz XJ4336-CC4336
card "Megahertz" "XJ4336-CC4336"
config 0x23 "sio2" 10
insert echo Megahertz XJ4336 inserted
remove echo Megahertz XJ4336 removed
[Prev][212][Next]
Name : Kazumasa Satoh (kaz3141@aol.com)
Machine : Gateway 2000 Solo 9100 JP 166LS (CPU Pentium P55CLM (MMX)
166 MHz, HDD 3 GB Enhanced IDE (IBM-DLGA-23080), RAM 64 MB
SDRAM)
FreeBSD : OK (FreeBSD 2.2.2-Release)
Pccard Pkg: PAO-970616
APM BIOS : Gateway BIOS(updated) is OK (APM BIOS Version 1.2)
PCIC : Cirrus Logic PD6832 CardBus Controller
Cards :
- Adaptec SlimSCSI APA-1460A/J97 KIT Rev. A
- NextCom Next Hawk Ethernet Adapter
# NextCom Next Hawk Etherneet Adapter
card "NextCom K.K." "Next Hawk"
config default "ed0" any
insert echo NextCom Next Hawk Ethernet
Adapter inserted
insert /etc/pccard_ether $device
remove echo NextCom Next Hawk Ethernet
Adapter removed
remove /etc/pccard_ether_remove $device
Misc Info :
Uncomment following options in the "PAO" configuration
file
options APM_BATT_LOW_SUSPEND
Add following options
options MFS
Add following controller and devices
# YAMAHA OPL3-SAx sound LSI system
controller snd0
device sb0 at isa? port 0x220 irq 5 conflicts
drq 1 vector sbintr
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x330
device opl0 at isa? port 0x388
[Prev][211][Next]
Name : Yoshinori Watanabe (nabe@s-input.co.jp)
Machine : OHTEC IDATEN FNP590D (CPU Pentium 90, HDD 540M, RAM 8M)
FreeBSD : OK (2.2.2-Release)
APM BIOS : NG (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- BUFFALLO LPC-T
[Prev][210][Next]
Name : Komori Nozomu (nozo@ke.ics.saitama-u.ac.jp)
Machine : Toshiba Libretto50 (CPU Intel Pentium-75MHz, HDD 810MB,
RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- TDK LAK-CD021BX
card "TDK" "LAC-CD02x"
config default "fe0" any
ether 0x92 00:80:98 # for CD021, CD021A, CD021AX
ether 0x96 00:80:98 # for CD021BX
insert echo TDK LAC-CD021 inserted
insert /etc/pccard_ether $device
remove echo TDK LAC-CD021 removed
remove /etc/pccard_ether_remove $device
- Telecom Device SuperSocket RE450T
card "Telecom Device" "SuperSocket RE450T"
config default "ed0" any 0x10
insert echo NE2000 compatible card inserted
insert /etc/pccard_ether $device
remove echo NE2000 compatible card removed
remove /etc/pccard_ether_remove $device
[Prev][209][Next]
Name : Toshimitsu Miyake (miyake@nalgo.co.jp)
Machine : Toshiba Libretto 60 (CPU Pentium 100MHz, HDD 1.6GB, RAM
32MB)
FreeBSD : OK (2.2.2-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or cones)
Cards :
- 3Com 3C589C
Misc Info :
shutdown -r now, then boot Windows 95; hang.
shutdown -r now, then boot FreeBSD; OK.
[Prev][208][Next]
Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp)
Machine : PC-9821Ld (CPU i486SX-33MHz, HDD 1245MB, RAM 11.6MB)
FreeBSD : OK (FreeBSD(98)2.2.2-RELEASE)
Pccard Pkg: PAO-970616 + PAO-970616-pc98-971023
APM BIOS : OK (1.4)
PCIC : Cirrus Logic PD672X
Cards :
- RATOC REX-R280
card "RATOC System Inc\\." "10BASE_T CARD R280"
config 0x3a "fe0" any
ether 0x1fc 00:c0:d0
insert echo RATOC REX-R280 10BASE-T LAN card inserted
insert /etc/pccard_ether $device
remove echo RATOC REX-R280 10BASE-T LAN card removed
remove /etc/pccard_ether_remove $device
[Prev][207][Next]
Name : Tsuyoshi SUMIDA (sumida@capricorn10.cse.kyutech.ac.jp)
Machine : Sharp Mebius MN-5400D (CPU Pentium-133MHz, HDD
1.6GB(Win95: 900M, FreeBSD: 600M), RAM 32MB)
FreeBSD : OK (2.2.2-Release)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt: LAPTOP
PCIC : TI PCI-1131 CardBus Controller
Cards :
- TDK CD021BX (Ethernet)
# TDK LAC-CD021, LAC-CD021A
card "TDK" "LAC-CD02x"
config default "fe0" any
#ether 0x94 00:80:98
ether 0x96 00:80:98
insert echo TDK LAC-CD021 inserted
insert /etc/pccard_ether $device
remove echo TDK LAC-CD021 removed
remove /etc/pccard_ether_remove $device
- 3Com 3C589C (Ethernet)
[Prev][206][Next]
Name : Ken'ichi Uenami (uenami@imasy.or.jp)
Machine : Toshiba Portege 300CT 1.6 (CPU MMX-Pentium 133MHz, HDD
1.6GB, RAM 32MB)
FreeBSD : OK (2.2-stable)
APM BIOS : OK (1.2(recognized as 1.1))
PCIC : ToPIC(Toshiba Propietary)
Cards :
- D-Link DE650T
[Prev][205][Next]
Name : Shuichi Oono (shu-oono@mbox.kyoto-inet.or.jp)
Machine : IBM ThinkPad 535E (CPU Pentium MMX 150MHz with 256KB
cache, HDD 1.6GB ( 650MB for DOS, 950MB for FreeBSD ), RAM
72MB)
FreeBSD : OK (2.2.1-RELEASE PAO)
APM BIOS :
OK, But have a little problem
(Hangup after shutdown XF86-3.2, if I suspended during X session is act.) (APM 1.1)
Config Opt: no machine dependent parameters
PCIC : Cirrius Logic PD6729 PC-Card Controller
Cards :
- RATOC REX9530 for SCSI2
- 3Com EtherLink-3 3C589D for Ethernet
- TDK DF5600 (K56flex) for Modem
Misc Info :
I don't have a confirmation what TDK DF5600 is working with K56flex.
But, dial-up ppp(iijppp with NAT patch) is working fine.
[Prev][204][Next]
Name : Takehiro TOMINAGA (tominaga@kurasc.kyoto-u.ac.jp)
Machine : NEC PC-9821Ne3 (Windows model) (CPU i486DX2 50MHz, HDD
340MByte (use only 100MByte for FreeBSD), RAM 7.6MByte)
FreeBSD : OK (2.2.1R)
Pccard Pkg: PAO-970331
APM BIOS : NG (kernel panic will happen when it enables apm bios)
(1.11)
PCIC :
Cirrus Logic PD-672X
(i don't know exactly, but pccardd says so in boot time message ;-)
Cards :
- Melco IFS-DS (SCSI card, OEM of RATOC REX 5536)
[Prev][203][Next]
Name : Douglas Carmichael (dcarmich@mcs.com)
Machine : NEC Versa 6050MH (CPU Pentium/150 MMX, HDD 1.44GB IDE, RAM
Real memory=50331648 (49152K bytes), Avail memory=46522368
(45432K bytes))
FreeBSD : OK (2.2.2-RELEASE, PAO-970616)
Pccard Pkg: (not using pccard-test)
APM BIOS : OK (1.1)
Config Opt: Sound and serial options in MISC section
PCIC : TI PCI-1130 CardBus controller
Misc Info :
Here are the options I used for sound on my machine:
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
options SBC_IRQ=5
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x330
device opl0 at isa? port 0x388
device pca0 at isa? port IO_TIMER1 tty
And the serial options (this is for the default settings of the rev 42
BIOS):
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 9 vector siointr
[Prev][202][Next]
Name : Gabor Kincses (gabor@acm.org)
Machine : IBM Thinkpad 755 CX (CPU Pentium 75 Mhz, HDD 810 MB (Win95
465 MB, FreeBSD 345 MB), RAM 24 MB)
FreeBSD : OK (2.2.2-RELEASE)
Pccard Pkg: PAO-970616
APM BIOS : OK (apm0 panics when booting from DOS for 800x600) (1.1)
PCIC : Intel 82365 (or clones)
Misc Info : i386/isa/syscons.h (COL=100, ROW=37)
[Prev][201][Next]
Name : Kiyoshi Utsui (utsui@mud.biglobe.ne.jp)
Machine : Libretto50 (CPU Pentium-75, HDD 810MB, RAM 32MB)
FreeBSD : OK (2.2.2-RELEASE)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt:
LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH,
APM_BROKEN_STATCLOCK, APM_NOSUSPEND_IMMEDIATE=3
PCIC : Intel 82365
Cards :
- MELCO LPC-TS
- MELCO IFC-DC
- TDK LAK-CD021AX
- MELCO CDN-D8C
[Prev][200][Next]
Name : Hideaki Okada (hokada@isl.melco.co.jp)
Machine : AMiTY CN (CPU Pentium 133MHz, HDD 1166MB, RAM 32MB)
FreeBSD :
PCIC(PAO) driver recognizes TI1131 CardBus controller as VLSI 82C146, so
only slot0(bottom one) can be used. IRQs other than 11 cannot be routed
from PC Card, so you need to select IRQ 11 for PC Card in the early
stage of the installation process and modify pccard.conf to use IRQ 11
only after pccard support is enabled.
2.2.2R(PAO-970616) seems not be able to read CIS, he says name of found
card is (null)(null). (2.2.1R)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
PCIC : TI 1131 CardBus Controller
Cards :
- 3Com EtherLink III 3C589B
- TDK DF2814
- EPSON FLASH PACKER 85MB
- INTEGRAL VIPER 170
[Prev][199][Next]
Name : Kikuti hideo (kikuchi_hi@akw05.khi.co.jp or
pxc00264@niftyserve.or.jp)
Machine : NEC PC9801 NL/R 120A (CPU 486SX(J)16MHz, HDD IBM DTLA21620
1.6GB, RAM 11.6MB)
FreeBSD : OK (FreeBSD(98)2.2.1R-RELEASE)
Pccard Pkg: PAO-970331-pc98-970721
APM BIOS : OK (apm: found APM BIOS version 1.2)
PCIC : PC-Card PC98 Original
Cards :
- TDK DF2814BX
IRQ 5 6
memory 0xda000 96k
NG-Cards :
RATOK REX9836A
[Prev][198][Next]
Name : Takayuki Hatano (tk-hatano@ntis.nec.co.jp)
Machine : ibm ThinkPad 560 (CPU p5 120MHz, HDD 810MB, RAM 24MB)
FreeBSD : OK (2.2.1)
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6729
Cards :
- D-LINK DE-650 ethernet card
Misc Info :
NG-CARD infomation
1. SCSI-CARD
MIDORI ELECTRONICS CN-SC43
probe ncv
ncv0:no ioaddr is given
Return IRQ=5
driver not allocation failed for MIDORI ELECTRONICS.* (Device not
configured)
used CD-ROM CARAVELLE CD-880
2. modem-CARD
Megahertz XJ4336J
many time not probed such a message as
No card in database for ""("")
But sometime probed such a message as
sio2: type 16550A
Card "Megahertz"("XJ4336J") matched "Megahertz"("XJ*")
and I can used ppp command
/etc/pccard.conf
card "Megahertz" "XJ"
config 0x23 "sio2" any
insert echo Megahertz PCMCIA Modem insert
remove echo Megahertz PCMCIA Modem remove
[Prev][197][Next]
Name : NAKAIWA Toshihiro (nakaiwa@sainet.or.jp)
Machine : IBM ThinkPad 535 (KF8) (CPU Pentium 120Mhz, HDD 2.1GB, RAM
40MB)
FreeBSD : OK (2.2.2R)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt: LAPTOP,TP535
PCIC : Cirrus Logic PD6729
Cards :
- NTT-TE tokyo MN128 TACard PC2
- TDK LAK-CD021AX
- adaptec SlimSCSI APA-1460J
- NextCom Net Dolphin NCM1428JA
[Prev][196][Next]
Name : Hiroki Suguri (suguri@comtec.co.jp)
Machine : Panasonic Let's note AL-N2T515J5 (CPU MMX Pentium (P55CLM)
150MHz, HDD 1.6GB, RAM 96MB)
FreeBSD : OK (2.2.2-RELEASE)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH
"APM_BATT_LOW_SUSPEND" "APM_NOSUSPEND_IMMEDIATE=3"
"MAXMEM=(96*1024)"
PCIC : Ricoh RL5C476 (PCI)
Cards :
- TDK DF3314E
- Panasonic TO-CAF336
- 3Com Etherlink III 3C589D
- Adaptec SlimSCSI APA-1460
NG-Cards :
- KME KXLC003
Misc Info :
KME KXLC003
(Untested card inserted. please e-mail the result to hosokawa@jp.FreeBSD.org)
pccardd[36]: Card "KME "("KXLC003") matched "KME" ("KXLC003")
pccardd[36]: driver allocation failed for KME (Device not configured)
pccardc and pccardd
PAO-970616/usr.sbin/pccard/{pccardc,pccardd} not installed by PAO
boot.flp. /stand/{pccardc,pccardd} were linked to /usr/sbin
instead. Is it intentional? See /stand/PAO/bin/bininstall.sh
[Prev][195][Next]
Name : Kazunori Ueno (jagarl@creator.club.or.jp)
Machine : PC-9821 Ls150 S14/D2 (CPU Pentium MMX 150MHz, HDD
1.4Gbytes (FreeBSD : 100Mbytes), RAM 32Mbytes)
FreeBSD : OK (2.2.1R)
Pccard Pkg: PAO-970331[1] + PAO-970331-pc98-970512[2]
APM BIOS : OK (1.12)
PCIC : Cirrus Logic PD672X
Cards :
- D-Link DE-660 Ethernet Card
# D-Link DE-660 Ethernet Card
card "D-Link" "DE-660"
config default "ed0" any 0x10
insert echo D-link DE-660 inserted
insert /etc/pccard_ether $device
remove echo D-link DE-660 removed
remove /etc/pccard_ether_remove $device
[Prev][194][Next]
Name : Shoichi Kitagawa (sk@kiu.ac.jp)
Machine : Latitude XPi P133ST (English keyboard) (CPU
Pentium-133MHz, HDD
1.2GB(7MB:FAT,494MB:Lunux,630MB:FreeBSD,27MB:Swap for
Linux & FreeBSD), RAM 40MB)
FreeBSD : OK (2.2-970422-RELENG)
Pccard Pkg: 970331
APM BIOS : OK except zzz (1.1)
Config Opt: KBD_MAXRETRY=5 KBD_MAXWAIT=8 KBD_RESETDELAY=500
PCIC : Vadem 468
Cards :
- IO-DATA PCFCA-10M
- 3Com 3C589B
- 3Com 3C589C
- Logitec LPM-LN20T
card "Logitec" "LPM-LN20T"
config default "ed0" any
insert /etc/pccard_ether $device
remove /etc/pccard_ether_remove $device
- Megahertz XJ3288J
- Megahertz XJ2144
- TDK DF2814B/M
- Adaptec APA-1460J
- TAXAN ICD-400PN
- IO-DATA PCINS-128 (ISDN)
- BUG Linkboy D64K
[Prev][193][Next]
Name : KANETA Shin'ichi (kaneta@rsirc.cr.chiba-u.ac.jp)
Machine : ThinkPad 535 (2606-MF9) (CPU Pentium (133MHz), HDD 1033MB
(Windows95 200MB, FreeBSD residual), RAM 40(8+32)MB)
FreeBSD : OK (2.2.2)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Config Opt:
LAPTOP
APM_IDLE_CPU
APM_PCCARD_RESUME
PCIC_RESUME_RESET
APM_BATT_LOW_SUSPEND
APM_NOSUSPEND_IMMEDIATE=3
PCIC : Cirrus Logic PD6729/6730
Cards :
- Allied Telesis,K.K Ethernet LAN Card CentreCOM LA-PCM
io 0x200-0x230
irq 10 11
card "Allied Telesis,K\\.K" "Ethernet LAN Card"
config 0x1 "ed0" any 0x10
ether 0xff0 00:00:f4
insert /etc/pccard_ether $device
remove /etc/pccard_ether_remove $device
Misc Info :
zzz(8) fails "Entire system suspend failure: errcode = 96".
But the kernel includes fdc driver works out well.
[Prev][192][Next]
Name : kazuhisa nakajima (nakasun@fatk.yamatake.co.jp)
Machine : PC-9821 Ls150 Aile (CPU Intel MMX Pentium 150MHz, HDD
1.4GB(W95:840MB,DOS:50MB,FreeBSD:500MB), RAM 32MB)
FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE)
Pccard Pkg: peo98enc.flp
APM BIOS : OK (1.12)
PCIC : Cirrus Logic PD672X
Cards :
- Melco LPC-T
[Prev][191][Next]
Name : Ichiro Sako (sako@law.kyushu-u.ac.jp)
Machine : PC9821La10 (CPU Pentium-100MHz, HDD 810M, RAM 16MB)
FreeBSD : OK (FreeBSD(98)2.2.1R-Alpha)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970721
APM BIOS : OK (1.11)
Config Opt: PC98
PCIC : Cirrus Logic PD672X
Cards :
- Melco LPC-TS
- TDK DF3314ES
[Prev][190][Next]
Name : Fujioka Hirokazu (87519296@people.or.jp)
Machine : NEC PC9801NS/A (CPU DX4-100MHz, HDD 540MB, RAM 9.6MB)
FreeBSD : OK (FreeBSD(98)2.2.1 ALPHA)
Pccard Pkg: PAO-970331+PAO-970331-pc98-970721
APM BIOS : OK (1.3)
PCIC : PC-Card PC98 Original
Cards :
- TDK DF1414EX(sio)
io 0x240-0x2e0
irq 5
memory 0xda000 96k
# TDK 14.4K modem series
card "TDK" "DF1414.*"
config 0x30 "sio1" any
reset 1000
insert echo TDK 14.4K modem inserted
remove echo TDK 14.4K modem removed
[Prev][189][Next]
Name : Takuro Tokuyama (tokuyama@nsc.mci.mei.co.jp)
Machine : Toshiba Libretto 30 (CPU Am5x86 100MHz, HDD 500MB, RAM
20MB)
FreeBSD : OK (2.2.2R)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.1)
Cards :
- NTT-TE TOKYO MN128 TA CARD PC1 (ISDN)
[Prev][188][Next]
Name : Hiroyuki Ohtsuki (ohtsuki@mic.atr.co.jp)
Machine : Toshiba Libretto 50CT (CPU Pentium (74.98-MHz 586-class
CPU), HDD 810MB (300MB for FreeBSD), RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET WAVELAN_PCMCIA_24
PCIC : PC-Card Intel 82365 (or clones)
Cards :
- AT&T WaveLAN/PCMCIA
- MATSHITA KME CD-ROM02 1.13
- GATEWAY2000("XJ1144")
Misc Info :
I used "setconf.exe" and "instconf.exe" on DOS to initialize WaveLAN
card. wlp0 cannot be automatically started.
ifconfig wlp0 up
dhcpc wlp0
are needed manually.
[Prev][187][Next]
Name : SASAKI Takesi (takesi@is.titech.ac.jp)
Machine : Fujitsu FMV5100NC-S (CPU Pentium, HDD 777MB, RAM 48MB)
FreeBSD : OK (2.2.2R)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Cards :
- ELAN Ethenet card
[Prev][186][Next]
Name : Takeshi Shibagaki (ie9t-sbgk@asahi-net.or.jp)
Machine : Sharp Mebius MN-7350 (CPU Intel Pentium 150MHz, HDD
2067MB, RAM 64MB)
FreeBSD :
NG(BootAsia PAO for 2.2.1),reboot in PCMCIA initialize.
OK(Walnut Creek 2.2.1 boot.flp in English) (FreeBSD2.2.1-RELEASE(kernel 2.2.2))
Pccard Pkg: PAO-97616+[bsd-nomads:04710]patch+etc
APM BIOS : OK (1.1)
Config Opt:
LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH
PCIC_PCI_ISA_CONFLICT, PCIC_MAX_SLOTS=2, PCIC_NOCLRREGS
APM_NOSUSPEND_IMMEDIATE=3, PCIC_IRQ=7, COM_MULTIPORT, APM_BROKEN_STATCLOCK
PCIC : Cirrus Logic PD6832
Cards :
- NTT Personal Paldio Data Card DC-1S
# NTT Personal 32kbps Data Card DC-1S
card "NTT Personal" "Paldio Data Card"
config 0x23 "sio2" pio
insert echo NTT Personal 32kbps Data Card DC-1S inserted
remove echo NTT Personal 32kbps Data Card DC-1S removed
- Megahertz XJ3288A-J (33.6kbps upgrade)
# Megahertz XJ3288A-J (33.6 upgraded)
card "Megahertz" "XJ3288-81"
config 0x23 "sio2" any
insert echo Megahertz modem inserted
remove echo Megahertz modem removed
[Prev][185][Next]
Name : Hasegawa, Tomoki (VYA04605@niftyserve.or.jp)
Machine : Toshiba DynaBookSS433 (CPU i486SX 33MHz, HDD
2.1GB(MK2103MAV), RAM 20MB)
FreeBSD : OK (2.2.2-RELEASE)
Pccard Pkg: PAO-970616
APM BIOS : OK (1.0)
PCIC : Intel 82365SL(or compatible)
Cards :
- NOTEWORTHY NW288CR
- TAXAN ICD-400PN (KME KXLC002)
- NTT Personal Paldio Data Card DC-1P
- DATAFAB PCMMD2
[Prev][184][Next]
Name : Atsushi Yanoma (CZL02453@niftyserve.or.jp)
Machine : IBM Think Pad 535 MF-9 (CPU Intel Pentium 133MHz, HDD
1.0GB, RAM 40MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: TP535
PCIC : Cirrus Logic PD9629
Cards :
- Media Intelligent SCSI-2 PC Card MSC-200
card "EPSON" "SCSI-2 PC Card SC200"
config 0x12 "ncv0" any
insert echo EPSON SCSI-2 PC Card MSC200 inserted
remove echo EPSON SCSI-2 PC Card MSC200 removed
[Prev][183][Next]
Name : Masaki KONUMA (konuma@de.mtex.co.jp)
Machine : NEC PC-9821Ld/350A (CPU Intel i486SX 33MHz, HDD 335MB, RAM
35.6MB)
FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505
APM BIOS : NG (1.4)
PCIC : Cirrus Logic PD672X
Cards :
- 3Com Etherlink III 3C589C
io 0x0d0-0x100
irq 10
[Prev][182][Next]
Name : Peter Dufault (dufault@hda.com)
Machine : IBM Thinkpad 365X (CPU Pentium 120Mhz, HDD 755MB (IBM
810MB), RAM 8MB (+16MB added))
FreeBSD : FreeBSD installed OK (2.2.1 from April '97 WC CDROM)
Pccard Pkg: Version on 2.2.1 WC CDROM
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- 3COM 3c589D
Misc Info :
3c589D needs "-link0 link1" in ifconfig in addition to setup with floppy.
The 365X keyboard works with syscons without enabling XT scancodes.
[Prev][181][Next]
Name : Chiharu Shibata (chi@rd.njk.co.jp)
Machine : ThinkPad 560-EJA (CPU Pentium-120MHz, HDD 810MB(Win95:
400M, FreeBSD: 410M), RAM 24MB)
FreeBSD : OK (2.2.1-Release)
Pccard Pkg: 970425
APM BIOS : OK (1.25)
Config Opt: LAPTOP
PCIC : Cirrus Logic PD6729
Cards :
- Melco LPC-TS
- Megahertz XJ3288-JP
- SONY CD-ROM Discman PRD-650
[Prev][180][Next]
Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp)
Machine : PC-9821La10 (CPU Intel Pentium 100MHz, HDD 1620MB, RAM
40MB)
FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512
APM BIOS : OK (1.11)
PCIC : Cirrus Logic PD672X
Cards :
- 3Com Etherlink III 3C589C
- RATOC REX-9835Z
- RATOC REX-9836A
- RATOC REX-9530
[Prev][179][Next]
Name : Terry R. Friedrichsen (terry@venus.sunquest.com)
Machine : Fujitsu Milan FPC05002A (CPU Pentium (120 MHz), HDD 1.2
GB, RAM 16 MB)
FreeBSD :
The only real problem is that the FreeBSD kernel will not talk to the
video display properly (Chips & Technologies CT65548). I used a serial
console to get the PAO kernel built and running. The video was still
scrambled until I enabled "device vt0" and "options PCVT_FREEBSD" in
the kernel config. (FreeBSD 2.2.1-RELEASE)
APM BIOS : OK except zzz (apm -z) gives "Invalid argument" (APM BIOS
version 1.1)
Config Opt: LAPTOP
PCIC : Cirrus Logic PD6729 rev 254 (5 mem and 2 I/O windows)
Cards :
- 3Com 3C589C
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589"
config default "ep0" 10
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
insert /sbin/ifconfig $device inet "inet-address" netmask 255.255.255.0 broadcast "broadcast address"
insert /sbin/route add default "default-gateway"
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig $device down
remove /etc/pccard_ether_remove $device
- Adaptec SlimSCSI
# Adaptec SlimSCSI
card "Adaptec, Inc\\." "APA-1460.*"
config default "aic0" 11
insert echo Adaptec Slim SCSI inserted
remove echo Adaptec Slim SCSI removed
Misc Info :
When installing X, configuring the Glidepoint touch pad as a Glidepoint
failed; configuring as a PS/2-style mouse worked.
Working modeline:
Modeline "800x600@8bpp" 35.87 800 840 968 1056 600 601 605 618
[Prev][178][Next]
Name : Jun YAMASHITA (junkun@esys.tsukuba.ac.jp)
Machine : TOSHIBA DynaBook Portage 620CT (CPU Intel Pentium
Processor 100Mhz, HDD default 1.3GB,but I use 700MB for
FreeBSD,and rests are for Windows95, RAM default 8MB +
extensional 16MB)
FreeBSD : OK (FreeBSD-2.2.1R)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- SII (Data Comminication Card MC-6500)
- I-O DATA(PCLA)
[Prev][177][Next]
Name : Hosobuchi Noriyuki (hoso@buchi.tama.or.jp)
Machine : PC-98001NS/A (CPU i486DX2 50MHz, HDD 120MB, RAM 17.6MB)
FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512
APM BIOS : OK (1.3)
PCIC : PC98-Original
Cards :
- Contec C-NET(PC)C
- Melco LPC-T
- PLANET ENW3500
- 3Com 3C589C
NG-Cards :
- IO-DATA PCFM-144
- Megahertz XJ2144-71
[Prev][175][Next]
Name : Yutaka Kudoh (ykudoh@nite.go.jp)
Machine : Fujitsu FMV-5100NL/Y (CPU Pentium 100MHz, HDD 2.1GB, RAM
32MB)
FreeBSD : OK (2.2.2-RELEASE)
Pccard Pkg: PAO-970604
APM BIOS : OK (1.1)
Config Opt: PCIC_IRQ=15
PCIC : Cirrus Logic PD-6729
Cards :
- Panasonic CF-VEL211P-B
- Adaptec SlimSCSI APA-1460
[Prev][174][Next]
Name : Keisuke TAKAYAMA (taka@magic.omiya.saitama.jp)
Machine : Sotec WinBookBird 100 (S3P100) (CPU Pentium 100MHz, HDD
810MB, RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : NG? (1.1)
PCIC : PC-Card Intel 82365 (or clones) (5 mem & 2 I/O windows)
Cards :
- Megahertz X-Jack Ethernet
Misc Info : Default Configuration is good for everything.
[Prev][173][Next]
Name : Masaki KONUMA (konuma@de.mtex.co.jp)
Machine : PC-9821Na12/H10 (CPU Intel Pentium 120MHz (Id=0x52b
Stepping=11 Features=0x1bf), HDD 1GB, RAM 23.6MB)
FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505
APM BIOS : OK (1.11)
PCIC : Cirrus Logic PD672X
Cards :
- Melco LPC-T
irq 3 5 6 10
card "PCMCIA" "UE2212"
config default "ed0" 5 0x10
ether 0xff0 00:00:e8
insert echo UE2212 inserted
insert /etc/pccard_ether $device
remove echo UE2212 card removed
remove /etc/pccard_ether_remove $device
[Prev][172][Next]
Name : Yoshinari Hayato (taichiro@towntv.co.jp)
Machine : FUJITSU FMV-5133 NP/W (CPU Pentium 133MHz, HDD 1.3GB, RAM
48MB)
FreeBSD : OK (2.2.2-RELEASE)
APM BIOS : OK (1.1)
PCIC : TI PCI-1130 CardBus Controller rev 4
Cards :
- ACCTON EN-2216
Misc Info :
In the previous(quite old?) report, there was a comment that
we can't use slot 1. But now both slots are available.
[Prev][171][Next]
Name : Masamichi HOSODA (trueroad@es.it-chiba.ac.jp)
Machine : PC-9801NS/A (CPU Cx486DX2 66MHz (I/O DATA PK-NSA66/C), HDD
500MB, RAM 9.6MB)
FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE)
Pccard Pkg: PAO-970331, PAO-970331-pc98-970505
PCIC : PC98 Original
Cards :
- Melco LPC-TS
- I/O DATA PCSC-II
[Prev][170][Next]
Name : Noriyuki KOIZUMI (GBC01623@niftyserve.or.jp)
Machine : Toshiba Libretto30 (CPU AMD Am5x86 100MHz, HDD 477MB, RAM
20MB)
FreeBSD : OK (2.2-STABLE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt:
LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH,
APM_BROKEN_STATCLOCK, APM_NOSUSPEND_IMMEDIATE=3
PCIC : Intel 82365 (or clones?)
Cards :
- Adaptec SlimSCSI (APA-1460J)
- 3Com 3C589C
- Megahertz X-Jack Ethernet CC10BT/2
- Megahertz XJ3288J-PU
- NTT Personal Paldio Data Card DC-1P
- EPSON Flash Packer 5MB
NG-Cards :
-
[Prev][169][Next]
Name : Kouichi ABE (kouichi@etn.yz.yamagata-u.ac.jp)
Machine : ThinkPad530CS 1FD (CPU Intel 486DX2/50MHz, HDD 1.3GB
(including DOS/Win3.1 120MB), RAM 20(8+12)MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: LAPTOP
PCIC : Intel 82365 (or clones)
Cards :
- 3Com Etherlink III PCMCIA 3C589C-TP
[Prev][167][Next]
Name : Jacques Garrigue (garrigue@kurims.kyoto-u.ac.jp)
Machine : Panasonic Lets's Note AL-N1T515J5 (CPU Pentium 150Mhz, HDD
1.35G (FreeBSD 700M), RAM 48Mbytes)
FreeBSD : OK (2.2-970422-RELENG)
Pccard Pkg: PAO-970331 for 2.2.1
APM BIOS : OK (1.1)
Config Opt: APM_BROKEN_STATCLOCK (did not try without)
PCIC : Intel 82365 (or clone)
Cards :
- TDK LAK-CD021 (Ethernet fe0)
NG-Cards :
- TAXAN PCS010 (SCSI-2) (with TAXAN ICD-800PW)
Misc Info :
Install failed with all versions of 2.2.1 (hang at boot).
2.1.7 was OK, but there is a bug in fe0 (using TDK LAC-CD021).
Finally I installed 2.2-970422-RELENG. GENERIC works, but not
PAO. But adding PAO options in GENERIC worked, so everything
is now fine with a custom configuration.
[Prev][166][Next]
Name : Koshin Sumitani (BXD04075@niftyserve.or.jp)
Machine : HP OmniBook 5500 CT (CPU Pentium 133MHz, HDD 2GB, RAM 48MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: LAPTOP PCIC_IRQ=9
PCIC : Cirrus Logic PD6729
Cards :
- Adaptec SlimSCSI APA-1460A
- 3COM Etherlink III 3C589C
- EPSON FlashPacker 20MB
- Logitec DATA/FAX MODEM CARD LPM-FM336
[Prev][165][Next]
Name : Cengiz Alaettinoglu
Machine : Micron Millennia Transport (CPU Pentium 133, HDD 2G, RAM
48K)
FreeBSD : OK (2.2.1)
APM BIOS : OK
PCIC : Cirrus Logic
Cards :
- 3com Etherlink III 3c589D
Misc Info :
XFree86 that comes w/ FBSD 2.2.1 has broken device drivers for
Cirrus Logic GD7548. I installed a newer beta version from
www.Xfree86.org
[Prev][164][Next]
Name : Yuichi Yoda
Machine : IBM ThinkPad 535 (2606-KF8) (CPU Pentium 120MHz, HDD IBM
DTNA-22160 (2.1GB), RAM 40MB)
FreeBSD : OK, No problem (2.2.1-RELEASE)
Pccard Pkg: PAO-970331 (installed from bootpao-970425.flp)
APM BIOS : OK (probe says "apm: found APM BIOS version 1.1")
Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET,
APM_BROKEN_STATCLOCK
PCIC : Cirrus Logic PD6729
Cards :
- Adaptec SlimSCSI APA-1460
- TDK DF2814B (Data/Fax Modem /Upgraded to 33600bps)
Misc Info : nothing specail
[Prev][163][Next]
Name : Takeshi UEno (tueno@vio.co.jp)
Machine : TOSHIBA Libretto 30 (CPU CPU Am5x86 100MHz, HDD 500MB, RAM
20MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO boot Floppy for 2.2-RELEASE
APM BIOS : OK (1.1)
PCIC : Intel 82365 (5 mem & 2 I/O windows)
Cards :
- APA-1460 Host SCSI Adapter
- Allied Telesis Ethernet LAN Adapter
- Panasonic TO-CAF288
- NTT DoCoMo PCMCIA DATA/FAX ADAPTER 9600 Mark2
- NTT Personal Paldio Data Card
NG-Cards :
- NIKON Digital Camera COOLPIX 100
[Prev][162][Next]
Name : Nick Sayer (nsayer@quack.kfu.com)
Machine : HP Omnibook 5000CTS (CPU Intel Pentium 90Mhz, HDD 1.2MB,
RAM 32M)
FreeBSD : OK (FreeBSD 2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME
PCIC : CL PD6729
Cards :
- 3C589B
- TDK 28.8 (forgot exact model)
NG-Cards :
- NE4100
- MEGAHERTZ XJ2144
Misc Info :
1. The 50% card success rate is disturbing. The same cards fail under win95,
so I am inclined to blame it on hardware.
2. I have gotten the sound to work (it is a CS4232), but it's an ugly
hack.
[Prev][161][Next]
Name : Minoru Horita (horita@osa.dec-j.co.jp)
Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.3GB, RAM
40MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- RATOC REX5588
NG-Cards :
- MEGASOFT STARFAX CARD288
[Prev][160][Next]
Name : Kei TANAKA (kei@pal.xerox.com)
Machine : IBM ThinkPad 760ED (CPU Intel Pentium 133MHz, HDD 2.1G,
RAM 40M)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: LAPTOP,APM_PCCARD_RESUME,PCIC_RESUME_RESET
PCIC : TI PCI-1130 CardBus Controller
Cards :
- 3Com EtherLink III PCMCIA 3C589C
- AT&T WaveLAN/PCMCIA
config default "wlp0" any
ether wavelan
insert echo WaveLAN PCMCIA inserted
insert /etc/pccard_ether $device
remove echo WaveLAN PCMCIA removed
remove /etc/pccard_ether_remove $device
Misc Info :
PAO-ready boot floppy failed to initialize PC Card driver. With ordinary boot
flopy 3C589C can be used as zp0, so I installed FreeBSD using zp0 then
installed PAO. But, without following patch PC Card controller was not
initialized.
zzz(8) fails when pccard is plugged in.
*** sys.pao/pccard/pcic.c Fri Mar 28 09:49:11 1997
--- sys/pccard/pcic.c Wed Mar 26 10:57:22 1997
***************
*** 121,128 ****
static void
pcic_pci_attach(pcici_t config_id, int unit)
{
! pcic_pci_ioaddr
! = pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO;
pci_conf_write(config_id, 0x04, 0x00ff00ff);
}
#endif /* NPCI > 0 */
--- 121,130 ----
static void
pcic_pci_attach(pcici_t config_id, int unit)
{
! if (pcic_pci_id != PCI_DEVICE_ID_PCIC_TI1130_CARDBUS) {
! pcic_pci_ioaddr =
! pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO;
! }
pci_conf_write(config_id, 0x04, 0x00ff00ff);
}
#endif /* NPCI > 0 */
[Prev][159][Next]
Name : Gregg Kasten (gregg@cs.stanford.edu)
Machine : Toshiba Satellite Pro 400CDT (CPU Pentium 75, HDD 700M,
RAM 48M)
FreeBSD :
Needed to take the "5,11" (non-default) choice for IRQ at PCCard
config screen during installation. Also needed to change this in
/etc/pccard.conf. (2.2.1-PAO)
Pccard Pkg: 970331
APM BIOS : OK (??)
PCIC : Intel-compatible (? whatever came with the computer)
Cards :
- 3COM Etherlink III (3c589b)
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589"
config default "ep0" any
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
# A few days after installation, I switched to the following card:
# Linksys Combo PCMCIA Ethernet Card
card "LINKSYS" "E-CARD"
config default "ed0" any 0x10
insert echo PCMCIA ETHERNET V1.0 inserted
insert /etc/pccard_ether $device
remove echo PCMCIA ETHERNET V1.0 removed
remove /etc/pccard_ether_remove $device
Misc Info :
I installed FreeBSD over the internet (ftp passive to ftp.freebsd.org)
using my 3Com 3c589b PCCard. Using the PCCard default IRQ options
("10,11", if I recall correctly, but I could be wrong), the machine hung
after downloading about 100k of the first distribution set. I tried this
a few times, and it once got up to around 300k before hanging. In order
to get the 3Com card working, I needed to take the "5,11" (non-default)
choice for IRQ at PCCard config screen during installation. With this
change, the install when flawlessly (and it was FAST!).
I also needed to change this in /etc/pccard.conf. A couple days later I
replaced the 3Com card with a LinkSys Combo EthernetCard (PCCard). I
didn't change the IRQs, so it's still running nicely with the "5,11" IRQ
setting in /etc/pccard.conf.
[Prev][158][Next]
Name : Gregg Kasten (gregg@cs.stanford.edu)
Machine : Toshiba Tecra 720CDT (CPU Pentium 133, HDD 2GB, RAM 48M)
FreeBSD : OK (2.2.1-PAO)
Pccard Pkg: 970331
APM BIOS : OK (??)
PCIC : Intel-compatible (? whatever came with the computer)
Cards :
- 3COM Etherlink III (3c589b)
card "3Com Corporation" "3C589"
config default "ep0" any
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
[Prev][157][Next]
Name : Kenichi Niioka (Kenichi.Niioka@unisys.co.jp)
Machine : Nihon Unisys AQUANTA LN (CPU Pentium 133MHz, HDD IDE 800MB
TOSHIBA MK1926FCV, RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
Config Opt:
options LAPTOP
options "PCIC_MAX_SLOTS=2"
options "PCIC_IRQ=11"
#device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12
vector psmintr
#device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
PCIC : O2Micro PCI to PCMCIA Bridge (Intel 82365 (or clones))
Cards :
- Nihon Unisys JPF0300-ETH Ethernet card
#Nihon Unisys
card "Nihon Unisys, Ltd." "JPF0400-ETH"
configdefault "ed0" 10
ether 0xff0 00:80:45
insert echo Nihon Unisys Ethernet inserted
insert /etc/pccard_ether $device
remove echo Nihon Unisys Ethernet removed
remove /etc/pccard_ether_remove $device
[Prev][153][Next]
Name : NISHIZUKA Koki (KHE01441@niftyserve.or.jp)
Machine : IBM ThinkPad 701C (2630-7TW) (CPU Intel DX4 75MHz, HDD
2GB(TOSHIBA MK2103MAV)(DOS 400MB, FreeBSD 1.6GB), RAM 40MB)
FreeBSD : OK (2.2-RELEASE (Mar.16,1997))
Pccard Pkg: PAO-970317
APM BIOS : OK (1.1)
Config Opt: LAPTOP
PCIC : Cirrus Logic PD672X
Cards :
- 3Com Etherlink III PCMCIA 3C589C
- Lanned Ethernet Card ELECOM LD-CDWA (MACNICA ME1-JEIDA)
- Megahertz XJ10BT
- Adaptec SlimSCSI APA-1460
- MACNICA MIRACLE SCSI-II mPS110
- IBM SCSI PCMCIA Card
- No Brand 20MB flash ATA card
- Epson America Inc. EHDD340
- Maxtor MobileMAX MXL171
- INTEGRAL PERIPHERALS Viper 260 (8260PA)
- INTEGRAL PERIPHERALS Viper 340 (8340PA)
- GREYSTONE PERIPHERALS DiskDock(PCMCIA to IDE Interface)
- Simple Technology SimpleJack Modem 28.8 Communicatator
- IBM Push Pop Modem
- IBM Double Jack Modem
- IBM Smart Capture Card II
[Prev][150][Next]
Name : HIGAKI, Masakazu (higaki@umi.hq.kishou.go.jp)
Machine : TOSHIBA DynaBook SS475 (CPU DX4 75MHz, HDD 500MB (FreeBSD
300MB, DOS/Win 200MB), RAM 24MB)
FreeBSD : OK (2.2-RELEASE)
Pccard Pkg: PAO-970317
APM BIOS : OK (1.0 compatible mode)
Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET,
APM_NOSUSPEND_IMMIDIATE=3, APM_BROKEN_STATCLOCK
PCIC : Intel 82365
Cards :
- 3Com EtherLink III 3C589B
Return to page top.
Toshihiko ARAI <toshi@jp.FreeBSD.org>