Laptop Survey / FreeBSD 2.2.5-RELEASE
[Prev][350][Next]
Name : Yasuhie CANADA (xicanada@vc-net.ne.jp)
Date : 2000/04/13
Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium
200MHz, HDD 1GB, RAM 96MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK
Cards :
- 3 Com EtherLinkIII 3C589D
[Prev][288][Next]
Name : Osamu Matsuda (omatsuda@eng.hokudai.ac.jp)
Machine : Hitachi Flora Prius Note 250 NU1 (CPU MMX Pentium 166MHz,
HDD 2.1GB, RAM 32MB)
FreeBSD : OK (2.2.5-Release)
Pccard Pkg: PAO-snap-980317
APM BIOS : OK (1.1)
PCIC : PCI-1131
Cards :
- 3COM 3C589D
- Panasonic TO-CAF56K
Misc Info :
1) Disabled COM2, USB, and Sound devices.
2) Suspend does not work when the TO-CAF56K modem card is inserted.
3) Booting takes very long time (longer than 5 min) when the CD-ROM dri
ve is presented.
4) XFree86 3.3.1 runs with 1024x768 mode.
[Prev][275][Next]
Name : Kazunori Aoshima
Machine : Compaq Contura aero 4/25 (CPU 486SX-25, HDD 500MHz, RAM
20MHz)
FreeBSD : OK, but some APM and serial patches needed. (2.2.5R)
Pccard Pkg: PAO-971207
APM BIOS : OK, but pathe need. (APM 1.1)
Config Opt: options "CONTURA"
PCIC : normal PCIC
Cards :
- D-Link DE-660
- IBM PCMCIA SCSI
NG-Cards :
- Contura aero PCCARD Floppydisk / Y-E data
Misc Info :
some patches needed.
2.2.6R PAO boot floppy cannnot work when install.
PCIC device isn't work.
[Prev][270][Next]
Name : KIZAKI Yoshio (GFG01633@nifty.ne.jp)
Machine : Toshiba Libretto30 (CPU DX4(100MHz) equivalent, HDD
1.6GB(IBM-DDLA-21620), RAM 20MB)
FreeBSD : OK (2.2.5)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- REX5536M
card "PCMCIA SCSI2 CARD" "01"
config 0x5 "stg0" any 0
insert echo REX5536M inserted
remove echo REX5536M removed
- LAK-CD021BX
[Prev][269][Next]
Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp)
Machine : MITSUBISHI apricot FX(M3484-B1C0) (CPU Pentium 120MHz, HDD
810MB, RAM 40MB)
FreeBSD : OK (FreeBSD 2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : NG (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- TDK LAK-CD021
- TDK LAK-CD021BX
Misc Info :
While installing I disabled the sound device.
Executing apm command makes panic.
But can suspend with suspend button(not apm -z).
Cannot power off with shutdown -x.
Sound device was set with BIOS to use I/O address to 0x220-, irq to 9,
8bit DMA to 1 and 16bits DMA to 5.
[Prev][258][Next]
Name : Hiroaki Goto (gorry@shonan.ne.jp)
Machine : TOSHIBA Libretto 50 (CPU Pentium 75MHz, HDD 800MB, RAM
32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- ICM PSC-2401 (SCSI card)
- corega Ether PCC-T
card "corega K.K." "corega Ether PCC-T"
config default "ed0" any
insert echo corega Ether PCC-T
insert /etc/pccard_ether $device
remove echo corega Ether PCC-T removed
remove /etc/pccard_ether_remove $device
[Prev][257][Next]
Name : Robert S. Hibi (hibi@med.kurume-u.ac.jp)
Machine : Chandler (Frontier Kojiro) (CPU Pentium 120MHz, HDD 800MB,
RAM 64MB (+ alpha))
FreeBSD : OK (2.2.5-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82635 (or clones)
Cards :
- 3Com Etherlink III 3C589D
- adaptec SlimSCSI
Misc Info :
Just a thing necessary for the installation was
to imput "flags npx0 0x01" and "quit" in UserConfig
CLI mode. -> Thanks Tatsumi.
[Prev][256][Next]
Name : Motomichi Masuzaki (mzaki@e-mail.ne.jp)
Machine : Libretto 70 (CPU Pentium MMX 120MHz, HDD 1.6G, RAM 32M)
FreeBSD : needs some tips described below (2.2.5)
APM BIOS : OK (1.1)
Cards :
- Panasonic LK-RM864D
- SuperSocket RE-450T
- SII MC-6530
- PLANET COMMUNICATIONS ENW-3501-T
[Prev][255][Next]
Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp)
Machine : SONY VAIO PCG-505X (CPU Intel Pentium MMX 166MHz, HDD 2GB,
RAM 32MB)
FreeBSD : OK (2.2.5R)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- TDK LAK-CD021AX
- Adaptec SlimSCSI(APA-1460J)
[Prev][254][Next]
Name : Ken-ichi Suzuki (ksuzuki@miyagi-ct.ac.jp)
Machine : TOSHIBA Libretto 30 (CPU 486DX4(100MHz), HDD 1.6MB, RAM
16MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET
Cards :
- Relia PCMCIA Ethernet Adapter
card "PCMCIA LAN" "Ethernet"
config default "ed0" any
insert echo Relia PCMCIA LAN inserted
insert /etc/pccard_ether $device
remove echo Relia PCMCIA LAN removed
remove /etc/pccard_ether_remove $device
- Megahertz 56k pccard modem CC1560J
[Prev][253][Next]
Name : Mori Takusi (tak_mori@kh.rim.or.jp)
Machine : SOTEC WinBook Bird S3P133 (CPU Pentium 133MHz, HDD 776MB
(680MB: FreeBSD, 96MB:DOS), RAM 48MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: Boot PAO flp (version: 971211?) -- I get it 03/97 from
http://www.jp.freebsd.org/PAO/
APM BIOS : ? -- After resumption from suspending, CPU speed becomes
very slowly. (1.1)
Config Opt: none (I used default PAO config)
Cards :
- KME SCSI PCMCIA (KXLC002)
# KME (TAXAN ICD-400PN, etc.)
card "KME" "KXLC002"
config 0x24 "ncv0" any 0xb4d00000
insert echo KME SCSI PCMCIA Card inserted
remove echo KME SCSI PCMCIA Card removed
Misc Info :
First, from DOS partition, I installed /bin ,/compat* and /src/sys
with Boot PAO flp, and compiled & installed PAO kernel, and edit
/etc/pccard.conf. Then (after reboot), form CDROM which is connected
to PCMCIA SCSI card, I could instrall the rest.
[Prev][252][Next]
Name : Takafumi Yabunaka (yabunaka@mb.infoweb.ne.jp)
Machine : Fujitsu FMV-475NL/S (CPU i486DX 75MHz, HDD 1.3GB / Toshiba
MK1301MAV, RAM 24MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.0)
PCIC : Cirrus Logic PD-6710
Cards :
- 3Com EtherLink III LAN PC Card 3C589D
- Megahertz Ethernet LAN Adapter XJ10BT
- Telecom Device Super Socket RE450T
# Telecom Device SuperSocket RE450T
card "Telecom Device K.K." "SuperSocket RE450T"
config 0x3 "ed0" any
insert echo Telecom Device SuperSocket RE450T inserted
insert /etc/pccard_ether $device
remove echo Telecom Device SuperSocket RE450T removed
remove /etc/pccard_ether_remove $device
- TDK Data/Fax Modem DF2814B/M
- KYOEI DATA/FAX MODEM S-336FM
# KYOEI CO., LTD. SHURIKEN FAX MODEM S-336FM
card "KYOEI CO., LTD." "S-336FM"
config 0x23 "sio2" any
reset 1000
insert echo KYOEI SHURIKEN MODEM inserted
remove echo KYOEI SHURIKEN MODEM removed
- OMRON Data/Fax Modem ME3314C-D
# OMRON Data/Fax Modem ME3314C-D
card "OMRON" "Modem w DPI ME3314C-D"
config 0x23 "sio2" any
reset 1000
insert echo OMRON Data/Fax Modem ME3314C-D inserted
remove echo OMRON Data/Fax Modem ME3314C-D removed
- TDK ISDN Adapter DN1280
# TDK ISDN Adapter DN1280
card "TDK" "DN1280"
config 0x22 "sio2" any
reset 1000
insert echo TDK ISDN Adapter DN1280 inserted
remove echo TDK ISDN Adapter DN1280 removed
- NTT DoCoMo Digital Data/Fax 9600 Mark II
- NTT DoCoMo Personal Paldio Data Fax Card DC-1S
## NTT Personal Paldio Data Card DC-1S
card "NTT Personal" "Paldio Data/Fax Card" "DC-1S"
config 0x22 "sio3" 11 0x40000
insert echo NTT Personal Paldio Data Card DC-1S inserted
remove echo NTT Personal Paldio Data Card DC-1S removed
- NTT DoCoMo Personal Paldio Data Fax Card DC-2N
- SII PHS DATA 32S MC-6530
# SII PHS DATA 32S MC-6530
card "SII" "PHS DATA 32S"
config 0x23 "sio2" any
insert echo SII PHS DATA 32S inserted
remove echo SII PHS DATA 32S removed
[Prev][250][Next]
Name : Koji Mochizuki (k-mochy@tb3.so-net.ne.jp)
Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.2GM, RAM
40MB)
FreeBSD : OK (2.2.5-Release)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- Adaptec SlimSCSI APA-1460
- TDK DF2814B/M
- D-Link DE-650 Ethernet Card
- Kingston KNE-PCM/x Ethernet
[Prev][249][Next]
Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu, Tokyo-Rika
Daigaku.) (sakai@miya3f01.ee.kagu.sut.ac.jp)
Machine : Dell Latitude CP M166ST (CPU MMX-Pentium 166MHz, HDD 4.0GB
(1.6G:Win95, 1.3G:FreeBSD (40M:/, 80M:swap, 32M:/var,
1120M:/usr), 570M:reserved for Linux, 510M:/home (for
FreeBSD & Linux)), RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET
APM_NOSUSPEND_IMMEDIATE=3 PCIC_TI113X_FUNC
PCIC : TI PCI1 131 CardBus
Cards :
- Logitec LPM-LN20T (Ethernet Card)
[Prev][248][Next]
Name : Hiroshi Tanaka (te194096@cse.ec.kyushu-u.ac.jp)
Machine : TOSHIBA DynaBook SS450 (CPU i486SX2 50MHz, HDD 340MB, RAM
8MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-ready FreeBSD Installation Floppy
APM BIOS : OK (1.0)
PCIC : Intel 82365(or clone)
Cards :
- D-link DE-660
[Prev][247][Next]
Name : HONDA Yasuhiro (honda@kashio.info.mie-u.ac.jp)
Machine : Sony VAIO PCG-729 (CPU MMX Pentium 266MHz, HDD 4GB, RAM
64MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: PCIC_TI113X_FUNC
PCIC : TI PCIC-1131 PCMCIA/CardBus bridge
Cards :
- 3Com 3C589D-J-TP
[Prev][246][Next]
Name : Masataka Okubo (okubo@mbox.kyoto-inet.or.jp)
Machine : Toshiba Libretto60CTA (CPU Pentium 100MHz, HDD 777MB
(Toshiba MK0803MAT), RAM 16MB)
FreeBSD : OK (2.2.5-Release)
Pccard Pkg: PAO-2.2.5-Release
APM BIOS : OK (1.1)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET
PCIC : Intel 82365
Cards :
- IBM PCMCIA SCSI Card
- AI Brain PCMCIA Type2 Ethernet Adapter (CeLAN EPCMCIA-T PnP)
NG-Cards :
- SOTEC MU-2000 (SCSI CD-ROM Adapter)
- Globalvilalge PowerPort Platinum Pro (For macintosh :-))
[Prev][245][Next]
Name : Kouji SATO (skouji@isl.melco.co.jp)
Machine : MITSUBISHI Pedion M3041 (CPU MMX Pentium 233MHz, HDD 1GB,
RAM 64MB)
FreeBSD : FTP install using boot.flp included in
2.2.1R-distribution. (2.2.5R)
APM BIOS : OK (1.1)
Config Opt: LAPTOP PCIC_TI113X_FUNC
PCIC : TI PCI-1131 PCMCIA/CardBus Bridge
Cards :
- 3Com 3C589B (Ethernet)
card "3Com Corporation" "3C589"
config default "ep0" 10
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
- TDK DF2814B/M (Modem)
card "TDK" "DF2814.*"
config 0x22 "sio2" 5
reset 1000
insert echo TDK 28.8K modem inserted
remove echo TDK 28.8K modem removed
- NTT DoCoMo PCMCIA DATA/FAX Adapter (96P1)
card "NTT DoCoMo" "PCMCIA DATA/FAX.*"
config 0x22 "sio2" 5
insert echo TDK 28.8K modem inserted
remove echo TDK 28.8K modem removed
[Prev][244][Next]
Name : M. Meiarashi (------)
Machine : Toshiba Portege 620CT (US version) (CPU Pentium 100MHz,
HDD 2GBytes (TOSHIBA MK2103MAV), RAM 40MBytes)
FreeBSD : OK (2.2.5)
Pccard Pkg: PAO-19971211
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- NTT DOCOMO DATA/FAX CARD 9600 MarkII
- NTT MOBILE DP CARD 2896 P DIGITAL (as modem)
- Planet SmartCom CreditCard 2000
- IBM Smart Caputre Card II
- AIWA PV-JF288
- Adaptec Slim SCSI
Misc Info :
On the above mentioned DoPa-enabled card; It worked with "data mode."
No test has been made for "packet mode."
[Prev][242][Next]
Name : Imai Kiyosi (imai@frei.cs.uec.ac.jp)
Machine : Libretto 70CT PA1260C9 (CPU Pentium MMX 120MHz, HDD 1.6G,
RAM 32M)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Cards :
- ELECOM Laneed LD-CDY
[Prev][241][Next]
Name : Tetsushi Nakai (-----)
Machine : IBM ThinkPad 535E (CPU MMX Pentium 150 MHz, HDD 1.6G, RAM
48M)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: PCVT_SCANSET=2
PCIC : Cirrus Logic PD-6729/6730
Cards :
- D-Link 650-T Ethernet
- Adaptech SlimSCSI APA-1460A
[Prev][240][Next]
Name : Ryo MIYAMOTO (rmiya@cc.hirosaki-u.ac.jp)
Machine : TOSHIBA Libretto 70 CT (CPU MMX Pentium 120MHz, HDD 1.6GB
(1GB for FreeBSD, 500MB for Win95, 30MB for Hibernation ),
RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: Default for PAO, such as: LAPTOP, APM_PCCARD_RESUME,
PCIC_RESUME_RESET, SCSI_DETACH, APM_NOSUSPEND_IMMEDIATE=3,
SCSI_LOW, APM_BROKEN_STATCLOCK
PCIC : Intel 82365 (or clones)
Cards :
- MELCO IFC-DC
- Logitec LPM-LN20T
Misc Info :
* Hibernation mechanism works very good by zzz command, power button, and closing LCD panel.
* `Logitec LPM-LN20T' works as:
pccardd[38]: Card "Logitec"("LPM-LN20T") matched "Logitec" ("LPM-LN20T")
ed0: address xx:xx:xx:xx:xx:xx, type NE2000 (16bit)
* `MELCO IFC-DC' works as:
pccardd[38]: Card "RATOC System Inc."("SCSI2 CARD 37") matched "RATOC System Inc." ("SCSI2 CARD.*")
probe ncv
attach ncv
ncv0: try to reset scsi bus
...
[Prev][239][Next]
Name : Greg Minshall (minshall@fiberlane.com)
Machine : IBM ThinkPad 560x (CPU 233 MHz Pentium, HDD 4GB, RAM 32MB)
FreeBSD : Installed fine. (2.2.5.)
Pccard Pkg: PAO-971211
APM BIOS :
Doesn't "just work". I haven't tried to see what to do to make
it work.
Cards :
- 3COM 3C589.
- IBM IDE PC Card (for 20X CDROM)
[Prev][238][Next]
Name : TAKABA Toshiharu
Machine : digital HiNote Ultra II (CTS5120) (CPU Pentium 120MHz, HDD
2 G Bytes, RAM 40 M Bytes)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (APM BIOS version 1.1)
PCIC : Cirrus Logic PD672X
Cards :
- 3Com EtherLink III 3C589C
Misc Info :
Not work MicroDock PCMCIA-IDE Interface card
(MICROTECH INTERNATIONAL, INC.)
[Prev][237][Next]
Name : Junya Nakata (tarou@cc.tuat.ac.jp)
Machine : ThinkPad370C (CPU DX4 75MHz, HDD 540MB (FreeBSD only), RAM
4MB+16MB=20MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET,
APM_BATT_LOW_SUSPEND, APM_NOSUSPEND_IMMEDIATE=3
PCIC : Intel 82365 (or clones) (5 mem & 2 I/O windows)
Cards :
- IBM Creditcard Ethernet II
Misc Info :
TrackPointII is recongnized as PS/2.
And working modeline is following.
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
[Prev][236][Next]
Name : Hiroshi Takeuchi (takeuchi@bear.aero.cst.nihon-u.ac.jp)
Machine : Toshiba Portege 300CT 1.6 (US Version) (CPU MMX-Pentium
133MHz, HDD 1.6GB, RAM 64MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.2(Recognized as 1.1))
PCIC : ToPIC(Toshiba Propietary)
Cards :
- Adaptec SlimSCSI APA-1460J
- Adaptec SlimSCSI APA-1460A
- Accton EN2212 Ethernet
- TDK LAK-CD021AX Ethernet
- Megahertz XJ3288 FAX/Modem
card "Megahertz" "XJ3288-81"
config 0x23 "sio1" any
insert echo Megahertz XJ3288-J Modem inserted
remove echo Megahertz XJ3288-J Modem removed
- IBM SmartCaptureCard II
Misc Info :
Needs to set BIOS PC-Card Mode to PCIC Compatible mode.
Resume does NOT work well WITHOUT sound devices(sb0,opl0) config.
Toshiba CD-ROM Dock works fine.
[Prev][235][Next]
Name : Sugimoto Sadahiro (g640678@komaba.ecc.u-tokyo.ac.jp)
Machine : SHARP Mebius MN-5500 (CPU MMX Pentium 150MHz, HDD 1.6GB
(Win95:800MB, FreeBSD:700MB), RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
APM BIOS : OK (1.1)
Config Opt: options "PCIC_TI113X_FUNC"
PCIC : TI PCI-1131 CardBus Controller
Cards :
- RATOC REX-9530 (SCSI-2)
irq 7 11
- IO-DATA PCLA/T (Ethernet)
Misc Info : I can not use "IRQ 10" for pccard.
[Prev][234][Next]
Name : Kodama Syuji (kodama@po.cmp-lab.or.jp)
Machine : Canon INNOVA 3600 (CPU MMX Pentium, HDD 1.2GB, RAM 320MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : FORCE_APM10 (1.1)
Config Opt:
device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr
device opl0 at isa? port 0x38a
PCIC : TI PCI-1130 CardBus Controller
[Prev][233][Next]
Name : Shuichi NAKAMURA (shuzo@cis.canon.co.jp)
Machine : COMPAQ CONTURA AERO 4/33C (CPU i486SX 33MHz, HDD 1.3GB,
RAM 20MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211(OK)
APM BIOS : OK (1.1)
Config Opt: LAPTOP CONTURA COM_IRQ_BUG APM_PCCARD_RESUME
PCIC_RESUME_RESET "APM_BATT_LOW_SUSPEND"
"APM_NOSUSPEND_IMMEDIATE=3"
PCIC : VLSI 82C146
Cards :
- 3Com EtherLINK III(3C589B)
card "3Com Corporation" "3C589"
config default "ep0" any
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
insert /sbin/ifconfig $device inet 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255
insert /sbin/route add default 192.168.0.1
remove echo 3Com Etherlink III removed
remove /sbin/route delete default
remove /sbin/ifconfig $device down
remove /etc/pccard_ether_remove $device
Misc Info :
In detail, see
http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/install.htm
http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/reconfig.htm
(sorry but, in Japanese)
Enjoy!
[Prev][232][Next]
Name : YOSINAGA, Naritosi (honey@tka.att.ne.jp)
Machine : Panasonic Let's note mini AL-N4T512J5 (CPU MMX Pentium
120MHz, HDD 1.6GB, RAM 80MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : Ricoh RL5C476
Cards :
- D-Link DE-660 Ethernet Card
- TDK DF5600
Misc Info : TDK DF5600 hangs by apm -z
[Prev][231][Next]
Name : Yoshinobu Inoue (-----)
Machine : Panasonic Let's Note AL-N4T512J5 (CPU MMX Pentium 120MHz,
HDD 1.6GB (1GB:FreeBSD, 400MB:win95, 100MB:hybernation),
RAM 16MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
Config Opt: no change from default
PCIC : ??
Cards :
- 3Com Etherlink III 3C589D
- TDK DF5600/J DATA/FAX Modem
Misc Info :
suspend/resume and hybernation/resume is OK when 3Com PCCARD is
set. There is small problem for suspend/hybernation when TDK PCCARD is
set. It is that the machine freeze 45 to 50 seconds after
suspend/hybernation, but after that it successfully suspend/hybernate.
However, if someone resumes, it suddenly begins hybernation again. And
next resume will success. But sometimes PCCARD is not recognized at
the 2nd resume. If you unset and set it, then it is recognized.
And as other information, I tried a BIOS confuguration that power off
PCCARD between suspend, and that also seems to be OK. XFree86 worked
at VGA resolution with Chipset NeoMagic configuration. Acceralated X
also worked at 800x600 and color depth 16. The hardware hot keys, "Fn"
+ ”F1-F10" also worked under FreeBSD and it can control display,
speaker, low electricity mode, hybernation, battery left, etc.
[Prev][230][Next]
Name : Kayoko, Okamoto (okamoto@mach.kokusaidenki.co.jp)
Machine : ThinkPad 560 (CPU Pentium-100MHz, HDD 2.1G(Windows95
500MB, FreeBSD 1600MB), RAM 24MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.2)
PCIC : Cirrus Logic PD6729
Cards :
- TDK Ethernet LAC-CD021AX
- Adaptec SlimSCSI APA-1460J
- TDK DF3314E
- Sicon Peripheral PCMCIA ATA/ATAPI Adapter
card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter"
config default "wdc1" any
insert echo Sicon Peripherals inserted
remove echo Sicon Peripherals removed
[Prev][227][Next]
Name : Yoshisuke Kato (kato@msa.co.jp)
Machine : SHARP Mebius MN-5500 (CPU MMX Pentium-150MHz(OverClock
200MHz), HDD 1.6GB, RAM 64MB)
FreeBSD : OK (2.2.5-RELEASE + PAO-971211)
APM BIOS : OK (1.1)
PCIC : TI PCI1131
Cards :
- Megahertz XJ10BT
- IO-DATA PC-INS128 (ThunderCard DD1280 Firmware ver1.5)
# NTT-IT ThunderCard
card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128"
config 0x22 "sio2" any 0x80
reset 1000
insert echo Thunder-card inserted
remove echo Thunder-card removed
- REX 5535 SCSI
- TDK DF1414 MODEM
[Prev][226][Next]
Name : ABE Masayuki (pzr@kw.netlaputa.ne.jp)
Machine : HITACHI FLORA-NL1 (CPU Pentium(100MHz), HDD 1GB(TOSHIBA
MK1004MAT), RAM 40MB(HAGIWARA SYS-COM HSC-HA3032K))
FreeBSD : tips: can't use IRQ 10 with slot 0, 1
(FreeBSD-2.2.5-RELEASE)
Pccard Pkg: PAO-971211
APM BIOS : OK (1.1)
PCIC : ctlr(0) TI PCI-1130 [i82365 compatible mode], ctlr(1)
Intel 82365 (or clones)
Cards :
- IBM Double Jack Modem(Data 28.8/Fax14.4)
- IBM SCC II (with xscc-0.21)
- PCI ENW-3500
- 3Com 3c589B
- INTEGRAL PERIPHERALS Viper 340
[Prev][224][Next]
Name : Kato Daisuke (katodai@taka.ee.titech.ac.jp)
Machine : SOTEC Winbook SC (CPU 486SX 33MHz, HDD 240MB, RAM 8MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971206
APM BIOS : OK (1.0)
Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET
APM_NOSUSPEND_IMMEDIATE=3
PCIC : Cirrus Logic PD672X
Cards :
- MELCO LPC-T
[Prev][223][Next]
Name : NABETANI Masaki (pxp14205@niftyserve.or.jp)
Machine : TOSHIBA TECRA720CDT/2.1 (CPU Pentium 133MHz, HDD
2.0GB(1.0GB for FreeBSD), RAM 48MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971206
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- IBM SCSI PCMCIA Card
[Prev][222][Next]
Name : Tatsumi Hosokawa (hosokawa@jp.FreeBSD.org)
Machine : Libretto 50CT US version (CPU Pentium 75MHz, HDD 1.6GB /
IBM DDLA-21620, RAM 32MB)
FreeBSD : OK (2.2.5-RELEASE)
Pccard Pkg: PAO-971201
APM BIOS : OK (1.1)
PCIC : 82365 compatible
Cards :
- Megahertz XJ-10BT
- Planet SmartCOM 3500
- Telecom Device SuperSocket RE450T
- IBM Creditcard Ethernet II
- Motorola Marine multifunction card (as modem)
- NTT-IT ThunderCard AVF288
- Adaptec SlimSCSI APA-1460
- Epson Flash Packer 10MB
- Integral Peripherals VIPER 340
- GREYSTONE DiskDock
- I/O DATA CDP-TX6
- I/O DATA CDP-TX10
- Panasonic LK-RM120
NG-Cards :
- Pioneer PCP-PW1W
Misc Info :
You have to keep last 34 megabytes of the drive as "unused" fdisk area
to use as hybernation area. You'll see the incredible tragedy without
it when you suspend the system :-).
[Prev][218][Next]
Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp)
Machine : Toshiba DynaBook SS475 (CPU Intel 486DX75, HDD 500MBytes,
RAM 32M)
FreeBSD : OK (2.2.5R)
Pccard Pkg: PAO-9706016
APM BIOS : OK (1.0)
PCIC : Intel 82365
Cards :
- Adaptec Slim SCSI
- TDK LAK-CD021
Return to page top.
Toshihiko ARAI <toshi@jp.FreeBSD.org>