Laptop Survey / FreeBSD 2.2.1-RELEASE
[Prev][274][Next]
Name : Takuro Onoue (tomotaka@po.synapse.or.jp)
Machine : Caravelle Topper (CPU AMD 5x86 PR75, HDD 810MB, RAM 36MB)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
PCIC : RICOH RF5C396
Cards :
- MACNICA MIRACLE SCSI II mPS-110
- TDK3313BZ
[Prev][263][Next]
Name : Katsuhiro OGUCHI
Machine : PC-9821 la10 (CPU Intel Pentium 100MHz, HDD 810M, RAM 40MB)
FreeBSD : OK (2.2.1)
APM BIOS : OK (1.11)
Cards :
- REX-5535
[Prev][243][Next]
Name : Kaoru Imuta (imu@ff.iij4u.or.jp)
Machine : SONY vaio PCG-505 (CPU MMX Pentium 133MHz, HDD 1GByte, RAM
60Mbyte)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365 or clones
Cards :
- NTT DoCoMo Mobile Data Card 96P1
config 0x23 "sio2" any
[Prev][225][Next]
Name : Hidetoshi Yanai (yanai@trcj.kao.co.jp)
Machine : Panasonic Let'sNote AL-N2 (CPU MMX Pentium 150MHz, HDD
1.6GB (800MB:FreeBSD, 800MB:win95), RAM 64MB)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
Cards :
- 3Com Etherlink III 3C589D
- adaptec SlimSCSI CE
[Prev][219][Next]
Name : Hirokazu Fujioka (h-fujioka@m2.people.or.jp)
Machine : NEC PC-9801NS/A (CPU i486SX 33MHz(ODP i486DX4 100MHz), HDD
500M, RAM 14336K bytes)
FreeBSD : OK (FreeBSD(98)2.2.1R)
Pccard Pkg: PAO-970331+PAO-970331-pc98-970721
APM BIOS : OK (APM BIOS version 1.3(NEC))
PCIC : PC-Card PC98 Original
Cards :
- -TDK DF1414EX DATA/FAX MODEM
#For NEC PC9801NS/A
# Generally available IO ports
io 0x240-0x2e0
# Generally available IRQs
irq 5
# Available memory slots
memory 0xda000 96k
# Modem Cards
# TDK 14.4K modem series
card "TDK" "DF1414.*"
config 0x30 "sio1" any
reset 1000
insert echo TDK 14.4K modem inserted
remove echo TDK 14.4K modem removed
- -Motorola MONTANA V.34 FAX/MODEM
# MOTOROLA 28.8K modem
card "Motorola" "MONTANA*"
config 0x23 "sio1" any
reset 1000
insert echo Motorola 28.8K modem inserted
remove echo Motorola 28.8k modem removed
[Prev][217][Next]
Name : Hideki Sakamoto (sakamoto@hlla.is.tsukuba.ac.jp)
Machine : DEC digital HiNote Ultra II (CPU P5-120, HDD 2GB, RAM 40MB)
FreeBSD : OK (2.2.1-R)
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- Adaptec SlimSCSI APA-1460J
- APEX Data MultiCard (as Modem)
- TDK LAK-CD021AX
- PCM250AM (2.5" HDD case and PCMCIA card)
# PCM250AM 2.5in HDD adapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
config 0xd "wdc1" any
insert echo PCM250AM inserted
remove echo PCM250AM removed
Misc Info : PCM250AM don't work with irq=15.
[Prev][210][Next]
Name : Komori Nozomu (nozo@ke.ics.saitama-u.ac.jp)
Machine : Toshiba Libretto50 (CPU Intel Pentium-75MHz, HDD 810MB,
RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- TDK LAK-CD021BX
card "TDK" "LAC-CD02x"
config default "fe0" any
ether 0x92 00:80:98 # for CD021, CD021A, CD021AX
ether 0x96 00:80:98 # for CD021BX
insert echo TDK LAC-CD021 inserted
insert /etc/pccard_ether $device
remove echo TDK LAC-CD021 removed
remove /etc/pccard_ether_remove $device
- Telecom Device SuperSocket RE450T
card "Telecom Device" "SuperSocket RE450T"
config default "ed0" any 0x10
insert echo NE2000 compatible card inserted
insert /etc/pccard_ether $device
remove echo NE2000 compatible card removed
remove /etc/pccard_ether_remove $device
[Prev][205][Next]
Name : Shuichi Oono (shu-oono@mbox.kyoto-inet.or.jp)
Machine : IBM ThinkPad 535E (CPU Pentium MMX 150MHz with 256KB
cache, HDD 1.6GB ( 650MB for DOS, 950MB for FreeBSD ), RAM
72MB)
FreeBSD : OK (2.2.1-RELEASE PAO)
APM BIOS :
OK, But have a little problem
(Hangup after shutdown XF86-3.2, if I suspended during X session is act.) (APM 1.1)
Config Opt: no machine dependent parameters
PCIC : Cirrius Logic PD6729 PC-Card Controller
Cards :
- RATOC REX9530 for SCSI2
- 3Com EtherLink-3 3C589D for Ethernet
- TDK DF5600 (K56flex) for Modem
Misc Info :
I don't have a confirmation what TDK DF5600 is working with K56flex.
But, dial-up ppp(iijppp with NAT patch) is working fine.
[Prev][204][Next]
Name : Takehiro TOMINAGA (tominaga@kurasc.kyoto-u.ac.jp)
Machine : NEC PC-9821Ne3 (Windows model) (CPU i486DX2 50MHz, HDD
340MByte (use only 100MByte for FreeBSD), RAM 7.6MByte)
FreeBSD : OK (2.2.1R)
Pccard Pkg: PAO-970331
APM BIOS : NG (kernel panic will happen when it enables apm bios)
(1.11)
PCIC :
Cirrus Logic PD-672X
(i don't know exactly, but pccardd says so in boot time message ;-)
Cards :
- Melco IFS-DS (SCSI card, OEM of RATOC REX 5536)
[Prev][200][Next]
Name : Hideaki Okada (hokada@isl.melco.co.jp)
Machine : AMiTY CN (CPU Pentium 133MHz, HDD 1166MB, RAM 32MB)
FreeBSD :
PCIC(PAO) driver recognizes TI1131 CardBus controller as VLSI 82C146, so
only slot0(bottom one) can be used. IRQs other than 11 cannot be routed
from PC Card, so you need to select IRQ 11 for PC Card in the early
stage of the installation process and modify pccard.conf to use IRQ 11
only after pccard support is enabled.
2.2.2R(PAO-970616) seems not be able to read CIS, he says name of found
card is (null)(null). (2.2.1R)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
PCIC : TI 1131 CardBus Controller
Cards :
- 3Com EtherLink III 3C589B
- TDK DF2814
- EPSON FLASH PACKER 85MB
- INTEGRAL VIPER 170
[Prev][199][Next]
Name : Kikuti hideo (kikuchi_hi@akw05.khi.co.jp or
pxc00264@niftyserve.or.jp)
Machine : NEC PC9801 NL/R 120A (CPU 486SX(J)16MHz, HDD IBM DTLA21620
1.6GB, RAM 11.6MB)
FreeBSD : OK (FreeBSD(98)2.2.1R-RELEASE)
Pccard Pkg: PAO-970331-pc98-970721
APM BIOS : OK (apm: found APM BIOS version 1.2)
PCIC : PC-Card PC98 Original
Cards :
- TDK DF2814BX
IRQ 5 6
memory 0xda000 96k
NG-Cards :
RATOK REX9836A
[Prev][198][Next]
Name : Takayuki Hatano (tk-hatano@ntis.nec.co.jp)
Machine : ibm ThinkPad 560 (CPU p5 120MHz, HDD 810MB, RAM 24MB)
FreeBSD : OK (2.2.1)
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD6729
Cards :
- D-LINK DE-650 ethernet card
Misc Info :
NG-CARD infomation
1. SCSI-CARD
MIDORI ELECTRONICS CN-SC43
probe ncv
ncv0:no ioaddr is given
Return IRQ=5
driver not allocation failed for MIDORI ELECTRONICS.* (Device not
configured)
used CD-ROM CARAVELLE CD-880
2. modem-CARD
Megahertz XJ4336J
many time not probed such a message as
No card in database for ""("")
But sometime probed such a message as
sio2: type 16550A
Card "Megahertz"("XJ4336J") matched "Megahertz"("XJ*")
and I can used ppp command
/etc/pccard.conf
card "Megahertz" "XJ"
config 0x23 "sio2" any
insert echo Megahertz PCMCIA Modem insert
remove echo Megahertz PCMCIA Modem remove
[Prev][195][Next]
Name : Kazunori Ueno (jagarl@creator.club.or.jp)
Machine : PC-9821 Ls150 S14/D2 (CPU Pentium MMX 150MHz, HDD
1.4Gbytes (FreeBSD : 100Mbytes), RAM 32Mbytes)
FreeBSD : OK (2.2.1R)
Pccard Pkg: PAO-970331[1] + PAO-970331-pc98-970512[2]
APM BIOS : OK (1.12)
PCIC : Cirrus Logic PD672X
Cards :
- D-Link DE-660 Ethernet Card
# D-Link DE-660 Ethernet Card
card "D-Link" "DE-660"
config default "ed0" any 0x10
insert echo D-link DE-660 inserted
insert /etc/pccard_ether $device
remove echo D-link DE-660 removed
remove /etc/pccard_ether_remove $device
[Prev][192][Next]
Name : kazuhisa nakajima (nakasun@fatk.yamatake.co.jp)
Machine : PC-9821 Ls150 Aile (CPU Intel MMX Pentium 150MHz, HDD
1.4GB(W95:840MB,DOS:50MB,FreeBSD:500MB), RAM 32MB)
FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE)
Pccard Pkg: peo98enc.flp
APM BIOS : OK (1.12)
PCIC : Cirrus Logic PD672X
Cards :
- Melco LPC-T
[Prev][191][Next]
Name : Ichiro Sako (sako@law.kyushu-u.ac.jp)
Machine : PC9821La10 (CPU Pentium-100MHz, HDD 810M, RAM 16MB)
FreeBSD : OK (FreeBSD(98)2.2.1R-Alpha)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970721
APM BIOS : OK (1.11)
Config Opt: PC98
PCIC : Cirrus Logic PD672X
Cards :
- Melco LPC-TS
- TDK DF3314ES
[Prev][190][Next]
Name : Fujioka Hirokazu (87519296@people.or.jp)
Machine : NEC PC9801NS/A (CPU DX4-100MHz, HDD 540MB, RAM 9.6MB)
FreeBSD : OK (FreeBSD(98)2.2.1 ALPHA)
Pccard Pkg: PAO-970331+PAO-970331-pc98-970721
APM BIOS : OK (1.3)
PCIC : PC-Card PC98 Original
Cards :
- TDK DF1414EX(sio)
io 0x240-0x2e0
irq 5
memory 0xda000 96k
# TDK 14.4K modem series
card "TDK" "DF1414.*"
config 0x30 "sio1" any
reset 1000
insert echo TDK 14.4K modem inserted
remove echo TDK 14.4K modem removed
[Prev][188][Next]
Name : Hiroyuki Ohtsuki (ohtsuki@mic.atr.co.jp)
Machine : Toshiba Libretto 50CT (CPU Pentium (74.98-MHz 586-class
CPU), HDD 810MB (300MB for FreeBSD), RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET WAVELAN_PCMCIA_24
PCIC : PC-Card Intel 82365 (or clones)
Cards :
- AT&T WaveLAN/PCMCIA
- MATSHITA KME CD-ROM02 1.13
- GATEWAY2000("XJ1144")
Misc Info :
I used "setconf.exe" and "instconf.exe" on DOS to initialize WaveLAN
card. wlp0 cannot be automatically started.
ifconfig wlp0 up
dhcpc wlp0
are needed manually.
[Prev][186][Next]
Name : Takeshi Shibagaki (ie9t-sbgk@asahi-net.or.jp)
Machine : Sharp Mebius MN-7350 (CPU Intel Pentium 150MHz, HDD
2067MB, RAM 64MB)
FreeBSD :
NG(BootAsia PAO for 2.2.1),reboot in PCMCIA initialize.
OK(Walnut Creek 2.2.1 boot.flp in English) (FreeBSD2.2.1-RELEASE(kernel 2.2.2))
Pccard Pkg: PAO-97616+[bsd-nomads:04710]patch+etc
APM BIOS : OK (1.1)
Config Opt:
LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH
PCIC_PCI_ISA_CONFLICT, PCIC_MAX_SLOTS=2, PCIC_NOCLRREGS
APM_NOSUSPEND_IMMEDIATE=3, PCIC_IRQ=7, COM_MULTIPORT, APM_BROKEN_STATCLOCK
PCIC : Cirrus Logic PD6832
Cards :
- NTT Personal Paldio Data Card DC-1S
# NTT Personal 32kbps Data Card DC-1S
card "NTT Personal" "Paldio Data Card"
config 0x23 "sio2" pio
insert echo NTT Personal 32kbps Data Card DC-1S inserted
remove echo NTT Personal 32kbps Data Card DC-1S removed
- Megahertz XJ3288A-J (33.6kbps upgrade)
# Megahertz XJ3288A-J (33.6 upgraded)
card "Megahertz" "XJ3288-81"
config 0x23 "sio2" any
insert echo Megahertz modem inserted
remove echo Megahertz modem removed
[Prev][184][Next]
Name : Atsushi Yanoma (CZL02453@niftyserve.or.jp)
Machine : IBM Think Pad 535 MF-9 (CPU Intel Pentium 133MHz, HDD
1.0GB, RAM 40MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: TP535
PCIC : Cirrus Logic PD9629
Cards :
- Media Intelligent SCSI-2 PC Card MSC-200
card "EPSON" "SCSI-2 PC Card SC200"
config 0x12 "ncv0" any
insert echo EPSON SCSI-2 PC Card MSC200 inserted
remove echo EPSON SCSI-2 PC Card MSC200 removed
[Prev][183][Next]
Name : Masaki KONUMA (konuma@de.mtex.co.jp)
Machine : NEC PC-9821Ld/350A (CPU Intel i486SX 33MHz, HDD 335MB, RAM
35.6MB)
FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505
APM BIOS : NG (1.4)
PCIC : Cirrus Logic PD672X
Cards :
- 3Com Etherlink III 3C589C
io 0x0d0-0x100
irq 10
[Prev][182][Next]
Name : Peter Dufault (dufault@hda.com)
Machine : IBM Thinkpad 365X (CPU Pentium 120Mhz, HDD 755MB (IBM
810MB), RAM 8MB (+16MB added))
FreeBSD : FreeBSD installed OK (2.2.1 from April '97 WC CDROM)
Pccard Pkg: Version on 2.2.1 WC CDROM
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- 3COM 3c589D
Misc Info :
3c589D needs "-link0 link1" in ifconfig in addition to setup with floppy.
The 365X keyboard works with syscons without enabling XT scancodes.
[Prev][181][Next]
Name : Chiharu Shibata (chi@rd.njk.co.jp)
Machine : ThinkPad 560-EJA (CPU Pentium-120MHz, HDD 810MB(Win95:
400M, FreeBSD: 410M), RAM 24MB)
FreeBSD : OK (2.2.1-Release)
Pccard Pkg: 970425
APM BIOS : OK (1.25)
Config Opt: LAPTOP
PCIC : Cirrus Logic PD6729
Cards :
- Melco LPC-TS
- Megahertz XJ3288-JP
- SONY CD-ROM Discman PRD-650
[Prev][180][Next]
Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp)
Machine : PC-9821La10 (CPU Intel Pentium 100MHz, HDD 1620MB, RAM
40MB)
FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512
APM BIOS : OK (1.11)
PCIC : Cirrus Logic PD672X
Cards :
- 3Com Etherlink III 3C589C
- RATOC REX-9835Z
- RATOC REX-9836A
- RATOC REX-9530
[Prev][179][Next]
Name : Terry R. Friedrichsen (terry@venus.sunquest.com)
Machine : Fujitsu Milan FPC05002A (CPU Pentium (120 MHz), HDD 1.2
GB, RAM 16 MB)
FreeBSD :
The only real problem is that the FreeBSD kernel will not talk to the
video display properly (Chips & Technologies CT65548). I used a serial
console to get the PAO kernel built and running. The video was still
scrambled until I enabled "device vt0" and "options PCVT_FREEBSD" in
the kernel config. (FreeBSD 2.2.1-RELEASE)
APM BIOS : OK except zzz (apm -z) gives "Invalid argument" (APM BIOS
version 1.1)
Config Opt: LAPTOP
PCIC : Cirrus Logic PD6729 rev 254 (5 mem and 2 I/O windows)
Cards :
- 3Com 3C589C
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589"
config default "ep0" 10
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
insert /sbin/ifconfig $device inet "inet-address" netmask 255.255.255.0 broadcast "broadcast address"
insert /sbin/route add default "default-gateway"
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig $device down
remove /etc/pccard_ether_remove $device
- Adaptec SlimSCSI
# Adaptec SlimSCSI
card "Adaptec, Inc\\." "APA-1460.*"
config default "aic0" 11
insert echo Adaptec Slim SCSI inserted
remove echo Adaptec Slim SCSI removed
Misc Info :
When installing X, configuring the Glidepoint touch pad as a Glidepoint
failed; configuring as a PS/2-style mouse worked.
Working modeline:
Modeline "800x600@8bpp" 35.87 800 840 968 1056 600 601 605 618
[Prev][178][Next]
Name : Jun YAMASHITA (junkun@esys.tsukuba.ac.jp)
Machine : TOSHIBA DynaBook Portage 620CT (CPU Intel Pentium
Processor 100Mhz, HDD default 1.3GB,but I use 700MB for
FreeBSD,and rests are for Windows95, RAM default 8MB +
extensional 16MB)
FreeBSD : OK (FreeBSD-2.2.1R)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
PCIC : Intel 82365 (or clones)
Cards :
- SII (Data Comminication Card MC-6500)
- I-O DATA(PCLA)
[Prev][177][Next]
Name : Hosobuchi Noriyuki (hoso@buchi.tama.or.jp)
Machine : PC-98001NS/A (CPU i486DX2 50MHz, HDD 120MB, RAM 17.6MB)
FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512
APM BIOS : OK (1.3)
PCIC : PC98-Original
Cards :
- Contec C-NET(PC)C
- Melco LPC-T
- PLANET ENW3500
- 3Com 3C589C
NG-Cards :
- IO-DATA PCFM-144
- Megahertz XJ2144-71
[Prev][174][Next]
Name : Keisuke TAKAYAMA (taka@magic.omiya.saitama.jp)
Machine : Sotec WinBookBird 100 (S3P100) (CPU Pentium 100MHz, HDD
810MB, RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : NG? (1.1)
PCIC : PC-Card Intel 82365 (or clones) (5 mem & 2 I/O windows)
Cards :
- Megahertz X-Jack Ethernet
Misc Info : Default Configuration is good for everything.
[Prev][173][Next]
Name : Masaki KONUMA (konuma@de.mtex.co.jp)
Machine : PC-9821Na12/H10 (CPU Intel Pentium 120MHz (Id=0x52b
Stepping=11 Features=0x1bf), HDD 1GB, RAM 23.6MB)
FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE)
Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505
APM BIOS : OK (1.11)
PCIC : Cirrus Logic PD672X
Cards :
- Melco LPC-T
irq 3 5 6 10
card "PCMCIA" "UE2212"
config default "ed0" 5 0x10
ether 0xff0 00:00:e8
insert echo UE2212 inserted
insert /etc/pccard_ether $device
remove echo UE2212 card removed
remove /etc/pccard_ether_remove $device
[Prev][171][Next]
Name : Masamichi HOSODA (trueroad@es.it-chiba.ac.jp)
Machine : PC-9801NS/A (CPU Cx486DX2 66MHz (I/O DATA PK-NSA66/C), HDD
500MB, RAM 9.6MB)
FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE)
Pccard Pkg: PAO-970331, PAO-970331-pc98-970505
PCIC : PC98 Original
Cards :
- Melco LPC-TS
- I/O DATA PCSC-II
[Prev][169][Next]
Name : Kouichi ABE (kouichi@etn.yz.yamagata-u.ac.jp)
Machine : ThinkPad530CS 1FD (CPU Intel 486DX2/50MHz, HDD 1.3GB
(including DOS/Win3.1 120MB), RAM 20(8+12)MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: LAPTOP
PCIC : Intel 82365 (or clones)
Cards :
- 3Com Etherlink III PCMCIA 3C589C-TP
[Prev][166][Next]
Name : Koshin Sumitani (BXD04075@niftyserve.or.jp)
Machine : HP OmniBook 5500 CT (CPU Pentium 133MHz, HDD 2GB, RAM 48MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: LAPTOP PCIC_IRQ=9
PCIC : Cirrus Logic PD6729
Cards :
- Adaptec SlimSCSI APA-1460A
- 3COM Etherlink III 3C589C
- EPSON FlashPacker 20MB
- Logitec DATA/FAX MODEM CARD LPM-FM336
[Prev][165][Next]
Name : Cengiz Alaettinoglu
Machine : Micron Millennia Transport (CPU Pentium 133, HDD 2G, RAM
48K)
FreeBSD : OK (2.2.1)
APM BIOS : OK
PCIC : Cirrus Logic
Cards :
- 3com Etherlink III 3c589D
Misc Info :
XFree86 that comes w/ FBSD 2.2.1 has broken device drivers for
Cirrus Logic GD7548. I installed a newer beta version from
www.Xfree86.org
[Prev][164][Next]
Name : Yuichi Yoda
Machine : IBM ThinkPad 535 (2606-KF8) (CPU Pentium 120MHz, HDD IBM
DTNA-22160 (2.1GB), RAM 40MB)
FreeBSD : OK, No problem (2.2.1-RELEASE)
Pccard Pkg: PAO-970331 (installed from bootpao-970425.flp)
APM BIOS : OK (probe says "apm: found APM BIOS version 1.1")
Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET,
APM_BROKEN_STATCLOCK
PCIC : Cirrus Logic PD6729
Cards :
- Adaptec SlimSCSI APA-1460
- TDK DF2814B (Data/Fax Modem /Upgraded to 33600bps)
Misc Info : nothing specail
[Prev][163][Next]
Name : Takeshi UEno (tueno@vio.co.jp)
Machine : TOSHIBA Libretto 30 (CPU CPU Am5x86 100MHz, HDD 500MB, RAM
20MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO boot Floppy for 2.2-RELEASE
APM BIOS : OK (1.1)
PCIC : Intel 82365 (5 mem & 2 I/O windows)
Cards :
- APA-1460 Host SCSI Adapter
- Allied Telesis Ethernet LAN Adapter
- Panasonic TO-CAF288
- NTT DoCoMo PCMCIA DATA/FAX ADAPTER 9600 Mark2
- NTT Personal Paldio Data Card
NG-Cards :
- NIKON Digital Camera COOLPIX 100
[Prev][162][Next]
Name : Nick Sayer (nsayer@quack.kfu.com)
Machine : HP Omnibook 5000CTS (CPU Intel Pentium 90Mhz, HDD 1.2MB,
RAM 32M)
FreeBSD : OK (FreeBSD 2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: APM_PCCARD_RESUME
PCIC : CL PD6729
Cards :
- 3C589B
- TDK 28.8 (forgot exact model)
NG-Cards :
- NE4100
- MEGAHERTZ XJ2144
Misc Info :
1. The 50% card success rate is disturbing. The same cards fail under win95,
so I am inclined to blame it on hardware.
2. I have gotten the sound to work (it is a CS4232), but it's an ugly
hack.
[Prev][161][Next]
Name : Minoru Horita (horita@osa.dec-j.co.jp)
Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.3GB, RAM
40MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
PCIC : Intel 82365
Cards :
- RATOC REX5588
NG-Cards :
- MEGASOFT STARFAX CARD288
[Prev][160][Next]
Name : Kei TANAKA (kei@pal.xerox.com)
Machine : IBM ThinkPad 760ED (CPU Intel Pentium 133MHz, HDD 2.1G,
RAM 40M)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
APM BIOS : OK (1.1)
Config Opt: LAPTOP,APM_PCCARD_RESUME,PCIC_RESUME_RESET
PCIC : TI PCI-1130 CardBus Controller
Cards :
- 3Com EtherLink III PCMCIA 3C589C
- AT&T WaveLAN/PCMCIA
config default "wlp0" any
ether wavelan
insert echo WaveLAN PCMCIA inserted
insert /etc/pccard_ether $device
remove echo WaveLAN PCMCIA removed
remove /etc/pccard_ether_remove $device
Misc Info :
PAO-ready boot floppy failed to initialize PC Card driver. With ordinary boot
flopy 3C589C can be used as zp0, so I installed FreeBSD using zp0 then
installed PAO. But, without following patch PC Card controller was not
initialized.
zzz(8) fails when pccard is plugged in.
*** sys.pao/pccard/pcic.c Fri Mar 28 09:49:11 1997
--- sys/pccard/pcic.c Wed Mar 26 10:57:22 1997
***************
*** 121,128 ****
static void
pcic_pci_attach(pcici_t config_id, int unit)
{
! pcic_pci_ioaddr
! = pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO;
pci_conf_write(config_id, 0x04, 0x00ff00ff);
}
#endif /* NPCI > 0 */
--- 121,130 ----
static void
pcic_pci_attach(pcici_t config_id, int unit)
{
! if (pcic_pci_id != PCI_DEVICE_ID_PCIC_TI1130_CARDBUS) {
! pcic_pci_ioaddr =
! pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO;
! }
pci_conf_write(config_id, 0x04, 0x00ff00ff);
}
#endif /* NPCI > 0 */
[Prev][159][Next]
Name : Gregg Kasten (gregg@cs.stanford.edu)
Machine : Toshiba Satellite Pro 400CDT (CPU Pentium 75, HDD 700M,
RAM 48M)
FreeBSD :
Needed to take the "5,11" (non-default) choice for IRQ at PCCard
config screen during installation. Also needed to change this in
/etc/pccard.conf. (2.2.1-PAO)
Pccard Pkg: 970331
APM BIOS : OK (??)
PCIC : Intel-compatible (? whatever came with the computer)
Cards :
- 3COM Etherlink III (3c589b)
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589"
config default "ep0" any
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
# A few days after installation, I switched to the following card:
# Linksys Combo PCMCIA Ethernet Card
card "LINKSYS" "E-CARD"
config default "ed0" any 0x10
insert echo PCMCIA ETHERNET V1.0 inserted
insert /etc/pccard_ether $device
remove echo PCMCIA ETHERNET V1.0 removed
remove /etc/pccard_ether_remove $device
Misc Info :
I installed FreeBSD over the internet (ftp passive to ftp.freebsd.org)
using my 3Com 3c589b PCCard. Using the PCCard default IRQ options
("10,11", if I recall correctly, but I could be wrong), the machine hung
after downloading about 100k of the first distribution set. I tried this
a few times, and it once got up to around 300k before hanging. In order
to get the 3Com card working, I needed to take the "5,11" (non-default)
choice for IRQ at PCCard config screen during installation. With this
change, the install when flawlessly (and it was FAST!).
I also needed to change this in /etc/pccard.conf. A couple days later I
replaced the 3Com card with a LinkSys Combo EthernetCard (PCCard). I
didn't change the IRQs, so it's still running nicely with the "5,11" IRQ
setting in /etc/pccard.conf.
[Prev][158][Next]
Name : Gregg Kasten (gregg@cs.stanford.edu)
Machine : Toshiba Tecra 720CDT (CPU Pentium 133, HDD 2GB, RAM 48M)
FreeBSD : OK (2.2.1-PAO)
Pccard Pkg: 970331
APM BIOS : OK (??)
PCIC : Intel-compatible (? whatever came with the computer)
Cards :
- 3COM Etherlink III (3c589b)
card "3Com Corporation" "3C589"
config default "ep0" any
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove echo 3Com Etherlink III removed
remove /etc/pccard_ether_remove $device
[Prev][157][Next]
Name : Kenichi Niioka (Kenichi.Niioka@unisys.co.jp)
Machine : Nihon Unisys AQUANTA LN (CPU Pentium 133MHz, HDD IDE 800MB
TOSHIBA MK1926FCV, RAM 32MB)
FreeBSD : OK (2.2.1-RELEASE)
Pccard Pkg: PAO-970331
Config Opt:
options LAPTOP
options "PCIC_MAX_SLOTS=2"
options "PCIC_IRQ=11"
#device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12
vector psmintr
#device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
PCIC : O2Micro PCI to PCMCIA Bridge (Intel 82365 (or clones))
Cards :
- Nihon Unisys JPF0300-ETH Ethernet card
#Nihon Unisys
card "Nihon Unisys, Ltd." "JPF0400-ETH"
configdefault "ed0" 10
ether 0xff0 00:80:45
insert echo Nihon Unisys Ethernet inserted
insert /etc/pccard_ether $device
remove echo Nihon Unisys Ethernet removed
remove /etc/pccard_ether_remove $device
Return to page top.
Toshihiko ARAI <toshi@jp.FreeBSD.org>