Laptop Survey / FreeBSD 3.4-RELEASE
[Prev][370][Next]
Name : Yukihisa Tago (y-tago@mxa.mesh.ne.jp)
Date : 2000/10/11
Machine : PC-9821La13/S14 (CPU Pentium/P54C 133MHz, HDD 1378MB, RAM
640KB + 48MB)
FreeBSD : OK (FreeBSD(98)3.4R-Rev01)
Pccard Pkg: PAO3-20000624-pc98-20000712
APM BIOS : OK (APM BIOS version 1.11)
PCIC : Cirrus Logic PD672X
Cards :
- NEC Aterm IC20
- NEC PC-9801N-J12
- NTT DoCoMo Mobile Card P-in
- KME KXLC003
card "KME" "KXLC003"
config 0x26 "ncv0" any 0xb4d00001
insert logger -s KME SCSI PCMCIA Card inserted
remove logger -s KME SCSI PCMCIA Card removed
- TDK FCD128N
- IBM microdrive
NG-Cards :
- NEC PC-9801N-J03R
[Prev][362][Next]
Name : Taku Okuno (liber@rr.iij4u.or.jp)
Date : 2000/07/07
Machine : Panasonic Let's note CF-B5V (CPU Mobile Celeron 500MHz,
HDD 9590MB, RAM 64M)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365DF
Cards :
- TDK DP9628 (sio)
[Prev][360][Next]
Name : Tatsuya TANIKAWA (tatsuya-t@sannet.ne.jp)
Date : 2000/07/01
Machine : TOSHIBA DynaBook SS-R575 (CPU Pentium/P54C 75MHz, HDD
2067MB / TOSHIBA MK2103MAV, RAM 40MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO-20000130
APM BIOS : OK (1.0 compatible mode)
Config Opt: PCIC_RESUME_RESET ATAPI_DETACH
PCIC : Intel 82365A/B (or clones)
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460J
- D-link DE-650 Ethernet Card
- MELCO LPC2-T Ethernet Card
- Microtech XpressDock
[Prev][359][Next]
Name : Tatsuya TANIKAWA (Tatsuya-t@sannet.ne.jp)
Date : 2000/07/01
Machine : SONY VAIO NOTE PCG-767 (CPU Pentium/P55C 264MHz, HDD
3909MB / FUJITSU MHC2040AT, RAM 128MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO-20000130
APM BIOS : OK (1.2)
Config Opt: PCIC_RESUME_RESET ATAPI_DETACH
PCIC : Ricoh RL5C478 [CardBus bridge mode]
Cards :
- AIWA PV-JF144
- I-O DATA DATA/FAX MODEM PCML-336
- Adaptec SlimSCSI APA-1460J
- D-link DE-650 Ethernet Card
- MELCO LPC2-T Ethernet Card
[Prev][358][Next]
Name : taro Miura (violataro@bigfoot.com)
Date : 2000/05/30
Machine : NEC LaVie NX LW26H/6 (CPU Mobile Celeron 266MHz, HDD
6194MB, RAM 64MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (v1.2)
Config Opt:
device pcic0 at isa? port 0x3e0 irq 10
device pcic0 at isa? port 0x3e4 irq 10
PCIC : TI PCI-1221 [CardBus bridge mode] (5 mem & 2 I/O windows)
Cards :
- MELCO LPC2-T (ed)
- MELCO LPC3-TX (ed)
- Allied Telesis LA-PCM (ed)
- NTT DoCoMo Paldio 611S (sio)
- NTT DoCoMo Mobile Card P-in (sio)
[Prev][356][Next]
Name : Heiner Strauss (hstrauss@bilch.com)
Date : 2000/05/31
Machine : IBM ThinkPad i Series 1400 (CPU Celeron (399.06-MHz
686-class CPU), HDD 4645MB, RAM 167772160K bytes)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-2000130
APM BIOS : OK (1.2)
Config Opt: options VM86
PCIC : Intel 82365DF
Cards :
- 3Com Megahertz 3CCFE574BT
Misc Info :
X11R6 3.3.6 + patch works with ATI Rage Mobility in 800x600, No
sound
[Prev][353][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/05/15
Machine : NEC PC-9821 VersaPro NX VP23C/WXmodel AA1 (CPU MMX Pentium
233MHz, HDD 12GB, RAM 128MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Cards :
- corega Ether II PCC-T
Misc Info :
o Graphic Chip is Trident Cyber9385-1.
XF86_SVGA server of XFree86 Ver. 3.3.5 worked at SVGA 16bit color,
if Option "noaccel" and VideoRam 2048
are added in Section "Device" of XF86Config file.
o If the machine is suspended as X server runs, it hungs up.
It can be suspended as Xserver doesn't run.
o HDD was exchanged to TOSHIBA MK1214GAP.
[Prev][352][Next]
Name : Yasuhide CANADA (xicanada@vc-net.ne.jp)
Date : 2000/05/15
Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium
200MHz, HDD 6GB, RAM 96MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Cards :
- ELECOM Laneed LD-CDY
Misc Info :
o Graphic Chip is NeoMagic MagicGraphic 128XD.
XF86_SVGA server of XFree86 Ver. 3.3.5 worked at SVGA 16bit color.
o HDD was exchanged to HITACHI_DK23AA-60 (BUFFALO DVN-6GX).
[Prev][348][Next]
Name : Satoshi Kimura (KFB03633@nifty.ne.jp)
Date : 2000/03/27
Machine : Toshiba Libretto ff 1100 CT (CPU Intel Pentium/P55C
(quarter-micron) 266MHz, HDD 3.2GB, RAM 64MB)
FreeBSD : OK (FreeBSD 3.4R)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Config Opt: device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0
PCIC : Toshiba ToPIC97 PCI-CardBus Bridge rev 0x07
Cards :
- I-O DATA PCET/TX Fast Ethernet LAN Card
- I-O DATA PCLA/TE Ethernet LAN Card
[Prev][347][Next]
Name : Tohru Kobayashi
Date : 2000/04/08
Machine : HITACHI FLORA Prius note 20M (204T36M) (CPU Intel Celeron
366MHz, HDD 6GB, RAM 64MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O
windows)
Cards :
- CyQve Technology FMC-561 FAX/MODEM CARD
- NTT Personal DC-1P
- FUJIFILM PC-AD3 smart media adapter
- corega Ether PCC-T
[Prev][346][Next]
Name : Kai Baesler (baska@lanparty.de)
Date : 2000/04/08
Machine : IBM ThinkPad 380D (Model.No.:2635-3A0) (CPU Intel Pentium
MMX 150MHz, HDD 2GB, RAM 48MB)
FreeBSD : OK, No Problem (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK, No Problem (1.2)
PCIC : Cirrus Logic PD6729/6730
Cards :
- 3Com Corporation ("3C589D") [TP/BNC LAN Card Ver. 2a]
- SunDisk ("SDP")
- IBM ("PCMCIA 33.6 Kbps International Data-Fax Modem")
Misc Info :
Graphic Chip is NeoMagic 128ZV (NM2093), XFree 3.3.5 worked at 800x600(16bit)
Sound Chip is Crystal CS423x, it works with OSS/FreeBSD
More BIOS Information:
- Power Managment Version: 1.18
- POST/BIOS version: 1.18
- Video Version 1.32
Parallel Port ZIP-Drive works just fine
Parallel Port Webcam (Connectix QuickCam) works fine
Infrared Hardware disabled in Bios to save Interrupts
PCMCIA-Slots of the Port-Replicator do not work when Laptop is docked, but i did'nt really try it...
[Prev][345][Next]
Name : Kei Sugano (siesta@mvd.biglobe.ne.jp)
Date : 2000/04/06
Machine : SONY VAIO PCG-Z505N/BP (CPU CPU Mobile Pentium III 450MHz,
HDD 8.1G (4G for Windows2000, 4G for FreeBSD), RAM 64MB)
FreeBSD : OK (3.4)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
Config Opt: none
PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O
windows)
Cards :
- Ninja-ATA CDROM (PCGA-CD51)
- TDK DF3314E DATE/FAX MODEM
- NTT DoCoMo PALDIO 611S
Misc Info :
NIC : OK (fxp)
Hibernation/Suspend : OK(?)
[Prev][344][Next]
Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp)
Date : 2000/04/02
Machine : ThinkPad600 (2645-41U) (CPU PentiumII 233MHz, HDD 3.2GB,
RAM 96MB)
FreeBSD : Need to reduce memory under 64MB to install (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1250
Cards :
- 3Com 3C589C
- NTT-DoCoMo Paldio 611S
[Prev][343][Next]
Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp)
Date : 2000/04/02
Machine : Hewlett Packard OmniBook900 (CPU PentiumII 366MHz, HDD
6.4GB, RAM 96MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1225
Cards :
- 3Com 3C589C
- IO DATA CBIDE2
- NTT-DoCoMo Paldio 611S
[Prev][342][Next]
Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp)
Date : 2000/04/02
Machine : ThinkPad600E (2645-8BJ) (CPU PentiumII 400MHz, HDD 10GB,
RAM 128MB)
FreeBSD : Need to reduce memory under 64MB to install (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1250
Cards :
- IBM PCMCIA Ethernet II
[Prev][341][Next]
Name : MIYASHITA Kensuke (miyasita@ee.ous.ac.jp)
Date : 2000/03/27
Machine : FMV-5100NC/S (CPU Pentium 100MHz, HDD 3GB, RAM 16MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Ricoh RL5C465 PCI-CardBus Bridge
Cards :
- FMV-J182
[Prev][339][Next]
Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp)
Date : 2000/03/21
Machine : DELL Inspiron 3500 (TS30T) (CPU Intel Celeron 300MHz, HDD
4.2GB, RAM 64MB)
FreeBSD : OK (with PAO-kern-20000227.flp and
PAO-mfsroot-20000218.flp) (FreeBSD 3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : TI PCI-1220
Cards :
- TDK CD-021AX
[Prev][336][Next]
Name : Taro Nakada (nyak@mb.kcom.ne.jp)
Date : 2000/03/19
Machine : DEC Digital HiNote Ultra II LTS5150 (CPU Pentium 150MHz,
HDD 4GB, RAM 40MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.1)
PCIC : Cirrus Logic PD672X
Cards :
- TDK LAK-CD021BX
- Adaptec APA-1460A
[Prev][334][Next]
Name : Toru Yano (toru@maid.ne.jp)
Date : 2000/3/18
Machine : Let's Note CF-A44EJ8 (CPU MMX Pentium 266MHz, HDD 9GB, RAM
128MB)
FreeBSD : OK (3.4-R)
Pccard Pkg: PAO3-20000130
APM BIOS : OK
Cards :
- PV-JF56
- Macnica ME1
[Prev][333][Next]
Name : Hidenori Ishikawa (hideishi@ops.dti.ne.jp)
Date : 2000/03/09
Machine : Mitsubishi AMiTY CN M3031 (CPU Intel Pentium MMX 200MHz,
HDD 2.1GB, RAM 32MB + 32MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000113
APM BIOS : OK (1.2)
Config Opt: none
PCIC : TI PCI-1220 [PCI-CardBus Bridge]
Cards :
- PLANEX (PLANET) FNW-3600-T (worked at 100BaseTX)
Misc Info :
Graphic Chip is NeoMagic 128ZV+, X worked at 800x600(16bit)
Sound Chip is ESS1879, in order to use, you have to change the
PnP_id of /sys/i386/isa/snd/sb_dsp.c
[Prev][332][Next]
Name : Amagai Yoshiji (amagai@nue.org)
Date : 2000/3/7
Machine : IBM ThinkPad 240 Model 2609-43J (CPU Mobile Ceceron
400MHz, HDD 12GByte, RAM 192MByte)
FreeBSD : OK (FreeBSD 3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365DF (5 mem & 2 I/O windows)
Cards :
- card "3Com" "Megahertz 574B"
Misc Info :
Disk C: 2G Windows 98
Disk D: 9G FreeBSD
Video: NeoMagic NM2160 2Mbyte, XFree86-3.3.5 OK
800x600 (Virtual 1024x768) with 16 Color Depth
Sound: OSS/FreeBSD 3.4 + ESS Solo-1 option, OK
On Memory Suspend: zzz command OK
LCD close OK
Save-to-Disk suspend: OK
Modem: NG
[Prev][331][Next]
Name : Yasuhiro Magara (gama@cds.ne.jp)
Date : 2000/03/02
Machine : TOSHIBA Libretto 70CTA (CPU MMX Pentium 120Mhz, HDD
IBM-DARA-206000 5.6G (3.6G for FreeBSD), RAM 32MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365A/B (5 mem & 2 I/O windows)
Cards :
- corega EtherII PCC-T
# COREGA EtherII PCC-T Ethernet Card
card "corega K\\.K\\." "corega EtherII PCC-T"
config auto "ed1" any
insert logger -s EtherII Corega EtherII PCC-T inserted
insert /etc/pccard_ether $device
remove logger -s EtherII Corega EtherII PCC-T removed
remove /etc/pccard_ether_remove $device
- ACCTON EN2216-PCMCIA-ETHERNET
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
# config auto "ed0" any 0x10
config 0x22 "ed0" any 0x10
ether 0x1c0 00:00:e8
insert /etc/pccard_ether $device
insert logger -s Accton EN2216 inserted
remove /etc/pccard_ether_remove $device
remove logger -s Accton EN2216 removed
[Prev][330][Next]
Name : Robert Bowen (robert@braingarage.com)
Date : 2000/2/22
Machine : IBM thinkpad 240 (CPU Celeron 300, HDD 6.4gb, RAM 192mb)
FreeBSD : No problem w/3.4r. Installed from DOS partition
(3.4-release)
Pccard Pkg: PAO3 20000130
APM BIOS :
perfectly. No problems at all - all apm functions appear to work
fine. (1.2)
Config Opt:
I used 0x1? flag in device pcic line because of "null" not found
errors. They never went away, however.
PCIC : TI in compatibility mode
Cards :
- Generic "kingsys" PCMCIA ethernet
card "PCMCIA" "Ethernet Card"
config auto "ed0" any 0x10
insert logger -s Ethernet Card inserted
insert /etc/pccard_ether $device
remove logger -s Ethernet Card removed
remove /etc/pccard_ether_remove $device
Misc Info :
I can't get the sound to work, but I am no expert. If you can
help with ESS-solo configuration, please email me.
[Prev][328][Next]
Name : ANAZAWA, Akio (anazawa@hic-soft.co.jp)
Date : 2000/02/15
Machine : IBM ThinkPad 570 (2644-AAJ) (CPU Mobile Celeron 366MHz,
HDD 6.4GB (2GB for Win98, rest for FreeBSD), RAM 128MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000130
APM BIOS : OK (1.2)
PCIC : Intel 82365DF (5 mem & 2 I/O windows)
Cards :
- MELCO(LPC2-T) [ETHERNET-CARD-UE-2216] [R02]
[Prev][322][Next]
Name : Yoshihiko Sarumaru (mistral@imasy.or.jp)
Date : 2000/04/27
Machine : SONY VAIO 505R (PCG-505R) (CPU MMX Pentium 233 MHz, HDD
3GB, RAM 64 MB)
FreeBSD : OK (3.4-RELEASE)
Pccard Pkg: PAO3-20000106
APM BIOS : OK (1.2)
Config Opt: PSM_HOOKAPM, PSM_RESETAFTERSUSPEND
PCIC : Ricoh RL5C475/476 [CardBus bridge mode]
Cards :
- Billionton LNT-10TB (NE2000 compatible; ed)
- 3Com Etherlink III (3C589C; ep)
- TDK LAK-CD021BX (fe)
- Adaptec SlimSCSI (APA-1460D; aic)
- Ninja-ATA (PCGA-CD51; wdc)
- EPSON FlashPacker 6MB (SunDisk OEM; wdc)
- PCM250AM (wdc)
# PCM250AM 2.5in HDD adapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
config default "wdc1" any cardio 0x180 10
insert logger -s PCM250AM inserted
remove logger -s PCM250AM removed
Misc Info :
BIOS setting: Plug & Play O/S = No, IrDA = disabled.
USB, Audio (ESS1879), Internal Modem (K56flex / V.90) are also available.
Speaker volume control by mixer command is something wrong (Fn-F4 work fine).
apm -Z doesn't work (Fn-F12 work well).
LCD close action does not make suspend.
PCM250AM need a wdc? entry which use port 0x180 and above change to
pccard.conf.
Return to page top.
Toshihiko ARAI <toshi@jp.FreeBSD.org>