### xf86config ### # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # For OSs that support Dynamically loaded modules, ModulePath can be # used to set a search path for the modules. This is currently supported # for Linux ELF, FreeBSD 2.x and NetBSD 1.x. The default path is shown # here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Module section -- this is an optional section which is used to specify # which dynamically loadable modules to load. Dynamically loadable # modules are currently supported only for Linux ELF, FreeBSD 2.x # and NetBSD 1.x. Currently, dynamically loadable modules are used # only for some extended input (XInput) device drivers. # ********************************************************************** # # Section "Module" # # This loads the module for the Joystick driver # # Load "xf86Jstk.so" # # EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # DisableVidModeExtension # Uncomment this to enable the use of a non-local xvidtune client. # AllowNonLocalXvidtune # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # DisableModInDev # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # AllowNonLocalModInDev EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock # To disable the XKEYBOARD extension, uncomment XkbDisable. XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbKeymap "xfree86(us)" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "Busmouse" Device "/dev/mse0" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Emulate3Buttons # Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Xinput section -- this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "Xinput" # SubSection "WacomStylus" # Port "/dev/ttyS1" # DeviceName "Wacom" # EndSubSection # SubSection "WacomCursor" # Port "/dev/ttyS1" # EndSubSection # SubSection "WacomEraser" # Port "/dev/ttyS1" # EndSubSection # # SubSection "Elographics" # Port "/dev/ttyS1" # DeviceName "Elo" # MinimumXPosition 300 # MaximumXPosition 3500 # MinimumYPosition 300 # MaximumYPosition 3500 # Screen 0 # UntouchDelay 10 # ReportDelay 10 # EndSubSection # # SubSection "Joystick" # Port "/dev/joy0" # DeviceName "Joystick" # TimeOut 10 # MinimumXPosition 100 # MaximumXPosition 1300 # MinimumYPosition 100 # MaximumYPosition 1100 # # CenterX 700 # # CenterY 600 # Delta 20 # EndSubSection # # The Mouse Subsection contains the same type of entries as the # standard Pointer Section (see above), with the addition of the # DeviceName entry. # # SubSection "Mouse" # Port "/dev/mouse2" # DeviceName "Second Mouse" # Protocol "Logitech" # EndSubSection # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "NANAO F347-2" VendorName "Nanao Corp." ModelName "F347-2" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 24.5-61.5 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 55-90 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. ModeLine "960x720" 75 960 1036 1172 1244 720 723 729 758 #-hsync -vsync ModeLine "400x300" 18 400 416 448 512 300 301 602 312 Doublescan # 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.50 640 700 764 816 480 485 488 508 -hsync -vsync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1040 600 612 617 649 -hsync -vsync # Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # 320x240 @ 72 Hz, 36.5 kHz hsync #Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync #Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" # VideoRam 256 # Clocks 25.2 28.3 EndSection Section "Device" Identifier "9FX Motion 771 PCI 2MB" VendorName "Number Nine Visual Technology" BoardName "Motion 771 PCI 2MB" #VideoRam 2048 #s3RefClk 16 # Use Option "nolinear" if the server doesn't start up correctly # (this avoids the linear framebuffer probe). If that fails try # option "nomemaccess". # # Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page. Clockchip "ibm_rgb5xx" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server Section "Screen" Driver "svga" Device "Generic VGA" #Device "9FX Motion 771 PCI 2MB" Monitor "NANAO F347-2" Subsection "Display" Depth 8 #Modes "960x720" "640x480" "800x600" ViewPort 0 0 Virtual 320 200 #Virtual 1280 1024 EndSubsection EndSection # The 16-color VGA server Section "Screen" Driver "vga16" Device "Generic VGA" Monitor "NANAO F347-2" Subsection "Display" Modes "960x720" "640x480" "800x600" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection # The Mono server Section "Screen" Driver "vga2" Device "Generic VGA" Monitor "NANAO F347-2" Subsection "Display" Modes "960x720" "640x480" "800x600" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64) Section "Screen" Driver "accel" Device "9FX Motion 771 PCI 2MB" Monitor "NANAO F347-2" DefaultColorDepth 16 Subsection "Display" Depth 8 Modes "960x720" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "960x720" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" "800x600" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "640x480" "800x600" ViewPort 0 0 EndSubsection EndSection ### end of XF86Config ###