=========================================================================== Laptop Survey / FreeBSD =========================================================================== =========================================================================== LTS ID : 379 Name : Shinichi Oshiro (oshiro@ofug.net) Date : 2000/12/21 Machine : LibrettoSS1000CTA (CPU Pentium/P55C (quarter-micron) (166.63-MHz 586-class CPU), HDD 2GB, RAM 32MB) FreeBSD : OK (3.5-STABLE#0) Pccard Pkg: PAO3-20001021 APM BIOS : OK (1.2) Config Opt: device pcm0 at isa? port 0x530 tty irq 5 drq 1 vector pcmintr PCIC : TOSHIBA TOPIC97 Cards : - Telecom Device K.K. SuperSocket RE550T (ed0 Ethernet Card) - IO DATA PCLATE (ed0 Ethernet Card) Misc Info : Graphic Chip is NeoMagic NM2097. XF86_SVGA server of XFree86 3.3.5 worked at SVGA 16bit color. sound worked pcm0 driver. =========================================================================== LTS ID : 378 Name : seinosuke kaneda (kk98010@isbs.kiu.ac.jp) Date : 2000/12/20 Machine : SHARP PC-PJ100S (CPU mobile Celeron450MHz, HDD 12GB, RAM 64MB) FreeBSD : OK (4.2Release) APM BIOS : OK (1.2) PCIC : TI PCI-1410 PCI-CardBus Bridge Cards : - Melco LPC2-TX - 3Com EtherlinkIII 3C589D - maxell PCCARD-ADAPTER - LogitGec LZD-PCM3 - Adaptec APA-1460 NG-Cards : - Melco LPC3-TX =========================================================================== LTS ID : 377 Name : Masaru YOKOI (myokoi@geocities.co.jp) Date : 2000/12/16 Machine : IBM ThinkPad 240 (2609) (CPU Celeron 400, HDD 12G, RAM 192MB) FreeBSD : Please see MISC information (FreeBSD 4.2-RELEASE) APM BIOS : OK PCIC : TI PCI-1211 PCI-CardBus Bridge Cards : - CyQ've ELA-110 10/100M LAN Card card "CyQ've" "ELA-110 10/100M LAN Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop - OMRON Modem ME5614CL card "OMRON" "Modem ME5614CL" config auto "sio" ? - IDO C081-PacketOne Card card "IDO" "C081-PacketOne Card" - SII (DDI Pocket) MC-200 Misc Info : When in this situation, pcic will not be proved. * "Modem for Legacy OS" is enabled in BIOS configuration. * "Serial port A" is disabled in BIOS configuration. And I modified kernel configuration for pcic. | device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 =========================================================================== LTS ID : 376 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/11/19 Machine : FUJITSU FMV 5120 NA/W (CPU Pentium 120MHz, HDD 2GB, RAM 24MB) FreeBSD : OK (3.5.1-RELEASE) Pccard Pkg: PAO3-20000710 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6710 Cards : - ELECOM Laneed LD-CDY Misc Info : - XF86_SVGA of XFree86 3.3.6 worked at SVGA 8bit color. - HDD was exchanged to FUJITSU MHA2021AT. - HDD was not recognized by wd0 driver of FreeBSD 4.1-RELEASE. =========================================================================== LTS ID : 375 Name : Ikumi Keita Date : 2000/11/01 Machine : DynaBook 2140 K45/2C8 (CPU AMD K6-2 (MMX) 450MHz, HDD 6GB, RAM 64MB) FreeBSD : OK (3.5.1-RELEASE) Pccard Pkg: PAO3-20000710 APM BIOS : MAXMEM="(63*1024)" & BIOS CONFIG `Power-up Mode -> Resume, Panel Power On/Off -> Enabled' required (1.2) Cards : - TDK Global Networker 3410 io 0x240-0x2e0 0x3e0-0x3ff ignirq 1 2 3 4 5 6 7 11 14 15 memory 0xc0000 96k - 3Com EtherLink III 3C589D-COMBO =========================================================================== LTS ID : 374 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/10/26 Machine : FMV-BIBLO LIFEBOOK 645MC6C/W / FMV6MCGTL6 (CPU Mobile Celeron 450MHz, HDD 6GB, RAM 128MB) FreeBSD : OK (4.1-RELEASE) PCIC : TI PCI-1410 PCI-CardBus Bridge Misc Info : - Graphic Chip is Trident Cyber 9525DVD. XF86_SVGA server of XFree86 3.3.6 worked at SVGA 16bit color. - NIC, Intel Pro 10/100B/100+ Ethernet, worked with fxp0 driver. =========================================================================== LTS ID : 373 Name : Tatsuya TANIKAWA (Tatsuya-t@sannet.ne.jp) Date : 2000/10/23 Machine : SONY VAIO NOTE PCG-767 (CPU Pentium/P55C 264MHz, HDD 11513MB / FUJITSU MHK2120AT, RAM 128MB) FreeBSD : OK (3.5.1-RELEASE) Pccard Pkg: PAO3-20001021 APM BIOS : OK (1.2) Config Opt: PCIC_RESUME_RESET ATAPI_DETACH PCIC : Ricoh RL5C478 [CardBus bridge mode] Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460J - D-link DE-650 Ethernet Card - MELCO LPC2-T Ethernet Card - Microtech XpressDock config default "wdc2" any 0x20000 cardio 0x340 0x10 =========================================================================== LTS ID : 372 Name : NUMATA Toshinori (numa@rp.open.cs.fujitsu.co.jp) Date : 2000/10/13 Machine : Fujitsu FMV-BIBLO MC3/45 (CPU Mobile Celeron 450MHz, HDD 9GB, RAM 192MB) FreeBSD : OK (3.5.1-RELEASE) Pccard Pkg: PAO-20000710 APM BIOS : NG (1.2) PCIC : Texas Instruments PCI-1410 CardBus Controller [Intel 82365DF compatible mode] Cards : - ELECOM Laneed LD-10/100CD (Fast Ethernet Card) - PIONEER PCP-PR24W (CD-ROM Drive with SCSI-2 Interface Card) - IO DATA MOF-1300/CBSC (MO Disk Drive with SCSI-2 Interface Card) The following lines are added to /etc/pccard.conf: # IO DATA CBSC-II (16-bit mode) card "IO DATA" "CBSC16" "1" config auto "nsp0" any #default insert logger -s "CBSC16 inserted" #device_id:(0x00) remove logger -s "CBSC16 removed" Misc Info : The display controller chip is Trident Cyber 9525 DVD, which requires XFree86 4.0 to run X Window System. I've installed XFree86-Server-4.0 and XFree86-clients-4.0 packages from BSDi 3.5.1-RELEASE CD-ROM set, and configured with HorizSync of 31.5-37.9 MHz and VertRefresh of 50-70 Hz. Laneed LD-10/100CD only runs in 10BaseT mode even with 100BaseTX hub, as others report. The SCSI PC-Card used by PIONEER PCP-PR24W CD-ROM Drive seems to be an OEM of IO DATA PCSC-F (its device driver for Windows is named as "PCSC-F UltraSMIT PCMCIA SCSI Card for DOS/V"), which can be handled by "nsp" device driver. The SCSI PC-Card accompanied with MOF-1300/CBSC is CBSC-II. It has two operating modes: CardBus mode and 16-bit mode. There is a switch on the side of the card to select the mode, and it must be set to 16-bit mode for use in FreeBSD. The built-in modem is a WinModem, and will not work. =========================================================================== LTS ID : 371 Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp) Date : 2000/10/11 Machine : ThinkPad X20 (2662 34J) (CPU Mobile Pentium III 600MHz SpeadStepTech LV, HDD 20GB, RAM 128MB) FreeBSD : OK (4.1.1-RELEASE) Pccard Pkg: None APM BIOS : OK (APM 1.2) PCIC : Ricoh RL5C476 PCI-CardBus Bridge Misc Info : GENERIC kernel can't attach pcic0 to pcic-pci0 correctly. If I inserted any card, then kernel has freezed. So, I rebuild kernel with follow line: device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 Then, I can use PCCARD. NOTE: I tried "polling mode", but it didn't work. =========================================================================== LTS ID : 370 Name : Yukihisa Tago (y-tago@mxa.mesh.ne.jp) Date : 2000/10/11 Machine : PC-9821La13/S14 (CPU Pentium/P54C 133MHz, HDD 1378MB, RAM 640KB + 48MB) FreeBSD : OK (FreeBSD(98)3.4R-Rev01) Pccard Pkg: PAO3-20000624-pc98-20000712 APM BIOS : OK (APM BIOS version 1.11) PCIC : Cirrus Logic PD672X Cards : - NEC Aterm IC20 - NEC PC-9801N-J12 - NTT DoCoMo Mobile Card P-in - KME KXLC003 card "KME" "KXLC003" config 0x26 "ncv0" any 0xb4d00001 insert logger -s KME SCSI PCMCIA Card inserted remove logger -s KME SCSI PCMCIA Card removed - TDK FCD128N - IBM microdrive NG-Cards : - NEC PC-9801N-J03R =========================================================================== LTS ID : 369 Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp) Date : 2000/10/04 Machine : ThinkPad X20 (2662 34J) (CPU Mobile Pentium III 600MHz SpeadStepTech LV, HDD 20GB, RAM 128MB) FreeBSD : OK (3.5-RELEASE) Pccard Pkg: PAO-20000710 APM BIOS : OK (APM 1.2) PCIC : Ricoh RL5C475/476 [CardBus bridge mode] Cards : - Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem) card "Xircom" "CreditCard Ethernet" config 0x27 "sio2" any insert echo Xircom CEM56 Card inserted as Modem remove echo Xircom CEM56 Card removed - Xircom CreditCard Ethernet 10/100+ Modem 56 (as ether) card "Xircom" "CreditCard Ethernet" config 0x27 "xe0" any insert logger -s Xircom CEM56 Card inserted as Ether remove logger -s Xircom CEM56 Card removed Misc Info : Inner ether card [Intel EtherExpress Pro 10/100B Ethernet] has attached fxp driver with out PAO package. but inner modem [Xircom MPCI+ Modem 56 WinGlobal] and Sound card [Crystal SoundFusion CS4281 WDM Audio] has not attached any driver. =========================================================================== LTS ID : 368 Name : ABE Masayuki (abe@po.ntts.co.jp) Date : 2000/09/13 Machine : IBM PC110 (CPU 486SX, HDD 128MB CF, RAM 20MB) FreeBSD : OK (2.2.8-STABLE) Pccard Pkg: PAO-19990405 APM BIOS : OK (1.0) PCIC : Ricoh RF5C396 Cards : - 3com 3c589d =========================================================================== LTS ID : 367 Name : Yoichi ASAI (yatt@msc.biglobe.ne.jp) Date : 2000/09/03 Machine : IBM ThinkPad i Series 1124 (formerly called "ThinkPad 240") (CPU Mobile Celeron 450MHz, HDD 12GB, RAM 192MB) FreeBSD : OK (3.5.1-RELEASE) Pccard Pkg: PAO3-20000710 APM BIOS : OK (1.2) PCIC : Intel 82365DF Cards : - corega EtherII PCC-T - PCMCIA UE2212 aka MELCO LPC-TN - Allied Telesis CentreCOM LA-PCM V2 Misc Info : PCIC Intel 82365DF does not work with FreeBSD 4.1-RELEASE. XFree86 3.3.6 works with XF86_SVGA server, config "SMI LynxEM+ (generic)". Sound chip "Crystal CS4281" works with 4front-tech's OSS driver. Internal modem does not work, for it is a "Winmodem". =========================================================================== LTS ID : 366 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/08/21 Machine : COMPAQ Armada M700 / ML6500/14/NT 4.0 (CPU Mobile Pentium III 500MHz, HDD 12GB, RAM 320MB) FreeBSD : OK (4.1-RELEASE) APM BIOS : OK (1.2) Misc Info : o Graphic Chip is ATI RAGE Mobility P. XF86_Mach64 server of XFree86 3.3.6 worked at XGA 24bit color. o NIC is Intel EtherExpress Pro 10/100B Ethernet. It worked with fxp0 driver. =========================================================================== LTS ID : 365 Name : Atushi Sakauchi (sakauchi@yamame.to) Date : 2000/08/05 Machine : SONY VAIO Z505S (CPU Celeron 333MHz, HDD 12GB, RAM 192MB) FreeBSD : OK (4.1-STABLE) APM BIOS : OK (1.2) Config Opt: device pcm PCIC : Ricoh RL5C475 PCI-CardBus Bridge Cards : - SONY PCGA-CDR51 CD-R ( Recovery mode ) - ADTEC AD-SMADP PC CARD ADAPTER for SmartMedia - NTT DoCoMo Mobile Card P-in - Adaptec SlimSCSI APA-1460A =========================================================================== LTS ID : 364 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/08/04 Machine : NEC PC-9821 VersaPro NX VP23C/WXmodel AA1 (CPU MMX Pentium 233MHz, HDD 12GB, RAM 128MB) FreeBSD : OK (4.1-RELEASE) APM BIOS : OK (1.2) Cards : - corega Ether II PCC-T Misc Info : o Graphic Chip is Trident Cyber9385-1. XF86_SVGA server of XFree86 3.3.6 worked at SVGA 16bit color, if Option "noaccel" and VideoRam 2048 are added in Section "Device" of XF86Config file. o If the machine is suspended as X server runs, it hungs up. It can be suspended as Xserver doesn't run. o HDD was exchanged to TOSHIBA MK1214GAP. o NIC is corega Ether II PCC-T. It worked with ed1 driver. =========================================================================== LTS ID : 363 Name : Tywon Muckler Date : 2000/07/17 Machine : Toshiba 2675DVD (CPU Pentium 3 450MHz, HDD 6GB 4xDVD, RAM 96MB) FreeBSD : OK (3.5-RELEASE) Cards : - D-LINK DFE-650 Ethernet card Misc Info : Dual booting Windows 98 SE and FreeBSD =========================================================================== LTS ID : 362 Name : Taku Okuno (liber@rr.iij4u.or.jp) Date : 2000/07/07 Machine : Panasonic Let's note CF-B5V (CPU Mobile Celeron 500MHz, HDD 9590MB, RAM 64M) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : Intel 82365DF Cards : - TDK DP9628 (sio) =========================================================================== LTS ID : 361 Name : Takenori Kobayashi (tk.kobayashi@3si.co.jp) Date : 2000/07/04 Machine : Panasonic Let's note CF-S51VJ8 (CPU Intel Mobile Celeron 300Mhz, HDD 8.1GB (Not default), RAM 128MB) FreeBSD : OK (4.0-RELEASE) APM BIOS : OK (1.2) Config Opt: device pcm device fxp PCIC : Ricoh RL5C475 PCI-CardBus Bridge =========================================================================== LTS ID : 360 Name : Tatsuya TANIKAWA (tatsuya-t@sannet.ne.jp) Date : 2000/07/01 Machine : TOSHIBA DynaBook SS-R575 (CPU Pentium/P54C 75MHz, HDD 2067MB / TOSHIBA MK2103MAV, RAM 40MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO-20000130 APM BIOS : OK (1.0 compatible mode) Config Opt: PCIC_RESUME_RESET ATAPI_DETACH PCIC : Intel 82365A/B (or clones) Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460J - D-link DE-650 Ethernet Card - MELCO LPC2-T Ethernet Card - Microtech XpressDock =========================================================================== LTS ID : 359 Name : Tatsuya TANIKAWA (Tatsuya-t@sannet.ne.jp) Date : 2000/07/01 Machine : SONY VAIO NOTE PCG-767 (CPU Pentium/P55C 264MHz, HDD 3909MB / FUJITSU MHC2040AT, RAM 128MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO-20000130 APM BIOS : OK (1.2) Config Opt: PCIC_RESUME_RESET ATAPI_DETACH PCIC : Ricoh RL5C478 [CardBus bridge mode] Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460J - D-link DE-650 Ethernet Card - MELCO LPC2-T Ethernet Card =========================================================================== LTS ID : 358 Name : taro Miura (violataro@bigfoot.com) Date : 2000/05/30 Machine : NEC LaVie NX LW26H/6 (CPU Mobile Celeron 266MHz, HDD 6194MB, RAM 64MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (v1.2) Config Opt: device pcic0 at isa? port 0x3e0 irq 10 device pcic0 at isa? port 0x3e4 irq 10 PCIC : TI PCI-1221 [CardBus bridge mode] (5 mem & 2 I/O windows) Cards : - MELCO LPC2-T (ed) - MELCO LPC3-TX (ed) - Allied Telesis LA-PCM (ed) - NTT DoCoMo Paldio 611S (sio) - NTT DoCoMo Mobile Card P-in (sio) =========================================================================== LTS ID : 357 Name : IRYO Takamasa Date : 2000/06/09 Machine : Panasonic Let's Note CF-A1ER (CPU Intel Celeron 400MHz, HDD 6GB, RAM 128MB) FreeBSD : OK (4.0-RELEASE) APM BIOS : OK (1.2) Cards : - Megahertz 56k PC Card Modem XJ1560J =========================================================================== LTS ID : 356 Name : Heiner Strauss (hstrauss@bilch.com) Date : 2000/05/31 Machine : IBM ThinkPad i Series 1400 (CPU Celeron (399.06-MHz 686-class CPU), HDD 4645MB, RAM 167772160K bytes) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-2000130 APM BIOS : OK (1.2) Config Opt: options VM86 PCIC : Intel 82365DF Cards : - 3Com Megahertz 3CCFE574BT Misc Info : X11R6 3.3.6 + patch works with ATI Rage Mobility in 800x600, No sound =========================================================================== LTS ID : 355 Name : YOSHIMURA Hideaki (kossetsu@fmp.gr.jp) Date : 2000/05/24 Machine : Panasonic Let's Note CF-L1A (CPU Mobile Celeron 400MHz, HDD 6GB, RAM 192MB) FreeBSD : Can't boot from floppy disk, El torito CD-ROM required (FreeBSD-current (22 Apr 2000 01:30)) APM BIOS : OK (1.2) PCIC : Ricoh RL5C475 Cards : - Allied Telesis LA100-PCM-T V2 (Fast Ethernet) Misc Info : Can't use (USB-)FDD, displayed as follows: fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 fdc0 not found at 0x3f0 Can't use internal modem because It isn't detected. It seems a software modem. Can't use built-in audio. There is no driver. =========================================================================== LTS ID : 354 Name : Hiromasa Baba (hiromasa@yk.rim.or.jp) Date : 2000/05/22 Machine : Akia Tornado 513M (CPU Pentium 133MHz, HDD 1.3GB, RAM 32MB) FreeBSD : OK (FreeBSD 4.0-Release) Pccard Pkg: within APM BIOS : OK (1.1) PCIC : 02micro OZ6729 PC-Card Bridge Cards : - TDK 33.6 Kbps FAX/Data Modem card "TDK" "DF3314E DATA/FAX MODEM" config 0x23 "sio3" 9 insert echo TDK DF3314E DATA/FAX MODEM inserted remove echo TDK DF3314E DATA/FAX MODEM removed - OLYMPUS PC Card Reader for Smart Media Card card "OLYMPUS" "PAN " config 0x01 "ata0" ? insert echo OLYMPUS PC-Card Reader for Smart Media inserted remove echo OLYMPUS PC-Card Reader for Smart Media removed =========================================================================== LTS ID : 353 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/05/15 Machine : NEC PC-9821 VersaPro NX VP23C/WXmodel AA1 (CPU MMX Pentium 233MHz, HDD 12GB, RAM 128MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) Cards : - corega Ether II PCC-T Misc Info : o Graphic Chip is Trident Cyber9385-1. XF86_SVGA server of XFree86 Ver. 3.3.5 worked at SVGA 16bit color, if Option "noaccel" and VideoRam 2048 are added in Section "Device" of XF86Config file. o If the machine is suspended as X server runs, it hungs up. It can be suspended as Xserver doesn't run. o HDD was exchanged to TOSHIBA MK1214GAP. =========================================================================== LTS ID : 352 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/05/15 Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium 200MHz, HDD 6GB, RAM 96MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) Cards : - ELECOM Laneed LD-CDY Misc Info : o Graphic Chip is NeoMagic MagicGraphic 128XD. XF86_SVGA server of XFree86 Ver. 3.3.5 worked at SVGA 16bit color. o HDD was exchanged to HITACHI_DK23AA-60 (BUFFALO DVN-6GX). =========================================================================== LTS ID : 351 Name : Yasuhide CANADA (xicanada@vc-net.ne.jp) Date : 2000/05/15 Machine : COMPAQ Armada M700 / ML6500/14/NT 4.0 (CPU Mobile Pentium III 500MHz, HDD 12GB, RAM 320MB) FreeBSD : OK (4.0-RELEASE) APM BIOS : OK (1.2) Misc Info : o Graphic Chip is ATI RAGE Mobility P. XF86_Mach64 server of XFree86 Ver. 3.3.6 worked at XGA 24bit color, although that of Ver. 3.3.5 didn't. o NIC is Intel EtherExpress Pro 10/100B Ethernet. It worked with fxp0 driver. =========================================================================== LTS ID : 350 Name : Yasuhie CANADA (xicanada@vc-net.ne.jp) Date : 2000/04/13 Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium 200MHz, HDD 1GB, RAM 96MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK Cards : - 3 Com EtherLinkIII 3C589D =========================================================================== LTS ID : 349 Name : Yasuhie CANADA (xicanada@vc-net.ne.jp) Date : 2000/04/13 Machine : Panasonic Let's note ace / AL-N3T520J5 (CPU MMX Pentium 200MHz, HDD 1GB, RAM 96MB) FreeBSD : OK (3.2-RELEASE) Pccard Pkg: PAO3-19990605 APM BIOS : OK Cards : - ELECOM Laneed LD-CDY =========================================================================== LTS ID : 348 Name : Satoshi Kimura (KFB03633@nifty.ne.jp) Date : 2000/03/27 Machine : Toshiba Libretto ff 1100 CT (CPU Intel Pentium/P55C (quarter-micron) 266MHz, HDD 3.2GB, RAM 64MB) FreeBSD : OK (FreeBSD 3.4R) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) Config Opt: device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 PCIC : Toshiba ToPIC97 PCI-CardBus Bridge rev 0x07 Cards : - I-O DATA PCET/TX Fast Ethernet LAN Card - I-O DATA PCLA/TE Ethernet LAN Card =========================================================================== LTS ID : 347 Name : Tohru Kobayashi Date : 2000/04/08 Machine : HITACHI FLORA Prius note 20M (204T36M) (CPU Intel Celeron 366MHz, HDD 6GB, RAM 64MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) Cards : - CyQve Technology FMC-561 FAX/MODEM CARD - NTT Personal DC-1P - FUJIFILM PC-AD3 smart media adapter - corega Ether PCC-T =========================================================================== LTS ID : 346 Name : Kai Baesler (baska@lanparty.de) Date : 2000/04/08 Machine : IBM ThinkPad 380D (Model.No.:2635-3A0) (CPU Intel Pentium MMX 150MHz, HDD 2GB, RAM 48MB) FreeBSD : OK, No Problem (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK, No Problem (1.2) PCIC : Cirrus Logic PD6729/6730 Cards : - 3Com Corporation ("3C589D") [TP/BNC LAN Card Ver. 2a] - SunDisk ("SDP") - IBM ("PCMCIA 33.6 Kbps International Data-Fax Modem") Misc Info : Graphic Chip is NeoMagic 128ZV (NM2093), XFree 3.3.5 worked at 800x600(16bit) Sound Chip is Crystal CS423x, it works with OSS/FreeBSD More BIOS Information: - Power Managment Version: 1.18 - POST/BIOS version: 1.18 - Video Version 1.32 Parallel Port ZIP-Drive works just fine Parallel Port Webcam (Connectix QuickCam) works fine Infrared Hardware disabled in Bios to save Interrupts PCMCIA-Slots of the Port-Replicator do not work when Laptop is docked, but i did'nt really try it... =========================================================================== LTS ID : 345 Name : Kei Sugano (siesta@mvd.biglobe.ne.jp) Date : 2000/04/06 Machine : SONY VAIO PCG-Z505N/BP (CPU CPU Mobile Pentium III 450MHz, HDD 8.1G (4G for Windows2000, 4G for FreeBSD), RAM 64MB) FreeBSD : OK (3.4) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) Config Opt: none PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) Cards : - Ninja-ATA CDROM (PCGA-CD51) - TDK DF3314E DATE/FAX MODEM - NTT DoCoMo PALDIO 611S Misc Info : NIC : OK (fxp) Hibernation/Suspend : OK(?) =========================================================================== LTS ID : 344 Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp) Date : 2000/04/02 Machine : ThinkPad600 (2645-41U) (CPU PentiumII 233MHz, HDD 3.2GB, RAM 96MB) FreeBSD : Need to reduce memory under 64MB to install (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : TI PCI-1250 Cards : - 3Com 3C589C - NTT-DoCoMo Paldio 611S =========================================================================== LTS ID : 343 Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp) Date : 2000/04/02 Machine : Hewlett Packard OmniBook900 (CPU PentiumII 366MHz, HDD 6.4GB, RAM 96MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : TI PCI-1225 Cards : - 3Com 3C589C - IO DATA CBIDE2 - NTT-DoCoMo Paldio 611S =========================================================================== LTS ID : 342 Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp) Date : 2000/04/02 Machine : ThinkPad600E (2645-8BJ) (CPU PentiumII 400MHz, HDD 10GB, RAM 128MB) FreeBSD : Need to reduce memory under 64MB to install (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : TI PCI-1250 Cards : - IBM PCMCIA Ethernet II =========================================================================== LTS ID : 341 Name : MIYASHITA Kensuke (miyasita@ee.ous.ac.jp) Date : 2000/03/27 Machine : FMV-5100NC/S (CPU Pentium 100MHz, HDD 3GB, RAM 16MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : Ricoh RL5C465 PCI-CardBus Bridge Cards : - FMV-J182 =========================================================================== LTS ID : 340 Name : T.Katayama (valcyrie@hi-ho.ne.jp) Date : 2000/03/22 Machine : SONY VAIO PCG-N505EL (CPU Intel MobileCeleron300MHz, HDD 6.4GB, RAM 64MB(+64MB)) FreeBSD : OK (3.2-RELEASE) Pccard Pkg: PAO3-19991011 APM BIOS : OK (1.2) Config Opt: none PCIC : Richo RL5C475 Cards : - Cy'Qube ELA-110 (ed0 FastEthenetCard) - Corega EtherPCC-T (ed0 EthenetCard) - MELCO WLI-PCM (ux0 WirelessEthenetCard) =========================================================================== LTS ID : 339 Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp) Date : 2000/03/21 Machine : DELL Inspiron 3500 (TS30T) (CPU Intel Celeron 300MHz, HDD 4.2GB, RAM 64MB) FreeBSD : OK (with PAO-kern-20000227.flp and PAO-mfsroot-20000218.flp) (FreeBSD 3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : TI PCI-1220 Cards : - TDK CD-021AX =========================================================================== LTS ID : 338 Name : YOSHIMURA Hideaki (kossetsu@a1.mbn.or.jp) Date : 2000/03/21 Machine : Panasonic Let's Note CF-L1A (CPU Mobile Celeron 400MHz, HDD 6GB, RAM 192MB) FreeBSD : Can's boot from floppy disk, El torito CD-ROM required (FreeBSD 3.3-RELEASE) Pccard Pkg: PAO3-19991011 APM BIOS : OK (1.2) PCIC : Ricoh RL5C475 Cards : - Allied Telesis LA100-PCM-T V2 (Fast Ethernet) - ASTEL 32kbps Data card XN-11 (PHS I/F) Misc Info : Can't use (USB-)FDD, displayed as follows: fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 fdc0 not found at 0x3f0 Can't use internal modem because It isn't detected. It seems a software modem. Can't use built-in audio CODEC because It isn't detected. W!ndows says "Crystal WDM Codec". =========================================================================== LTS ID : 337 Name : Kenji Yamada (kyamada@isi.edu) Date : 2000/03/20 Machine : Toshiba Dynabook SS 3380 (CPU Celeron 400Mhz, HDD 8GB, RAM 64MB) FreeBSD : OK (3.3-RELEASE) Pccard Pkg: PAO3-19991011 APM BIOS : OK (1.2) PCIC : Toshiba ToPIC97 PCI-CardBus Bridge Cards : - 3Com Etherlink III, 3C589B =========================================================================== LTS ID : 336 Name : Taro Nakada (nyak@mb.kcom.ne.jp) Date : 2000/03/19 Machine : DEC Digital HiNote Ultra II LTS5150 (CPU Pentium 150MHz, HDD 4GB, RAM 40MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD672X Cards : - TDK LAK-CD021BX - Adaptec APA-1460A =========================================================================== LTS ID : 335 Name : ANDRIANOV, Fedor (fedandr@math.uchicago.edu) Date : 2000/3/18 Machine : FUJITSU Lifebook 435Dx (CPU Intel Pentium MMX 133MHz, HDD 1.3GByte: Windows95=540MByte, FreeBSD=810MByte, RAM 24MByte) FreeBSD : OK (FreeBSD 3.3R) Pccard Pkg: Old PAO package incorporated into original FreeBSD source tree APM BIOS : OK (1.2) Config Opt: PCIC_RESUME_RESET PCIC : Cirrus Logic PD6729/6730 PC-Card Controller Cards : - TDK V.34 FAX/MODEM Card DFV3400 # TDK 36.6 Fax/Data/Voice Modem card "TDK" "DFV3400 Data/Fax/Voice Modem" config 0x23 "sio2" 11 insert echo TDK DFV3400 inserted remove echo TDK DFV3400 removed Misc Info : Sound device is available as SB compatible mode. controller snd0 device sb0 at isa? port 0x220 irq 5 drq 0 device opl0 at isa? port 0x388 =========================================================================== LTS ID : 334 Name : Toru Yano (toru@maid.ne.jp) Date : 2000/3/18 Machine : Let's Note CF-A44EJ8 (CPU MMX Pentium 266MHz, HDD 9GB, RAM 128MB) FreeBSD : OK (3.4-R) Pccard Pkg: PAO3-20000130 APM BIOS : OK Cards : - PV-JF56 - Macnica ME1 =========================================================================== LTS ID : 333 Name : Hidenori Ishikawa (hideishi@ops.dti.ne.jp) Date : 2000/03/09 Machine : Mitsubishi AMiTY CN M3031 (CPU Intel Pentium MMX 200MHz, HDD 2.1GB, RAM 32MB + 32MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000113 APM BIOS : OK (1.2) Config Opt: none PCIC : TI PCI-1220 [PCI-CardBus Bridge] Cards : - PLANEX (PLANET) FNW-3600-T (worked at 100BaseTX) Misc Info : Graphic Chip is NeoMagic 128ZV+, X worked at 800x600(16bit) Sound Chip is ESS1879, in order to use, you have to change the PnP_id of /sys/i386/isa/snd/sb_dsp.c =========================================================================== LTS ID : 332 Name : Amagai Yoshiji (amagai@nue.org) Date : 2000/3/7 Machine : IBM ThinkPad 240 Model 2609-43J (CPU Mobile Ceceron 400MHz, HDD 12GByte, RAM 192MByte) FreeBSD : OK (FreeBSD 3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : Intel 82365DF (5 mem & 2 I/O windows) Cards : - card "3Com" "Megahertz 574B" Misc Info : Disk C: 2G Windows 98 Disk D: 9G FreeBSD Video: NeoMagic NM2160 2Mbyte, XFree86-3.3.5 OK 800x600 (Virtual 1024x768) with 16 Color Depth Sound: OSS/FreeBSD 3.4 + ESS Solo-1 option, OK On Memory Suspend: zzz command OK LCD close OK Save-to-Disk suspend: OK Modem: NG =========================================================================== LTS ID : 331 Name : Yasuhiro Magara (gama@cds.ne.jp) Date : 2000/03/02 Machine : TOSHIBA Libretto 70CTA (CPU MMX Pentium 120Mhz, HDD IBM-DARA-206000 5.6G (3.6G for FreeBSD), RAM 32MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : Intel 82365A/B (5 mem & 2 I/O windows) Cards : - corega EtherII PCC-T # COREGA EtherII PCC-T Ethernet Card card "corega K\\.K\\." "corega EtherII PCC-T" config auto "ed1" any insert logger -s EtherII Corega EtherII PCC-T inserted insert /etc/pccard_ether $device remove logger -s EtherII Corega EtherII PCC-T removed remove /etc/pccard_ether_remove $device - ACCTON EN2216-PCMCIA-ETHERNET card "ACCTON" "EN2216-PCMCIA-ETHERNET" # config auto "ed0" any 0x10 config 0x22 "ed0" any 0x10 ether 0x1c0 00:00:e8 insert /etc/pccard_ether $device insert logger -s Accton EN2216 inserted remove /etc/pccard_ether_remove $device remove logger -s Accton EN2216 removed =========================================================================== LTS ID : 330 Name : Robert Bowen (robert@braingarage.com) Date : 2000/2/22 Machine : IBM thinkpad 240 (CPU Celeron 300, HDD 6.4gb, RAM 192mb) FreeBSD : No problem w/3.4r. Installed from DOS partition (3.4-release) Pccard Pkg: PAO3 20000130 APM BIOS : perfectly. No problems at all - all apm functions appear to work fine. (1.2) Config Opt: I used 0x1? flag in device pcic line because of "null" not found errors. They never went away, however. PCIC : TI in compatibility mode Cards : - Generic "kingsys" PCMCIA ethernet card "PCMCIA" "Ethernet Card" config auto "ed0" any 0x10 insert logger -s Ethernet Card inserted insert /etc/pccard_ether $device remove logger -s Ethernet Card removed remove /etc/pccard_ether_remove $device Misc Info : I can't get the sound to work, but I am no expert. If you can help with ESS-solo configuration, please email me. =========================================================================== LTS ID : 329 Name : Toshio Saruta (saruta@higeta.co.jp) Date : 2000/2/22 Machine : IBM Thinkpad240 (CPU Mobile Celeron 300MHz, HDD 6GB, RAM 64MB) FreeBSD : OK (2.2.8-STABLE (3.3RELEASE also OK)) Pccard Pkg: PAO-19990405 APM BIOS : OK (1.2) PCIC : Texas Instruments PCI-1211 Cards : - Corega Ether PCC-T - Fujitsu FMV-182 - Kyocera DataScope for DoCoMo # KYOCERA DataScope for DoCoMo card "DataScope for DoCoMo" "1.00" config 0x30 "sio2" any 0x82 insert logger -s DataScope for DoCoMo inserted remove logger -s DataScope for DoCoMo removed =========================================================================== LTS ID : 328 Name : ANAZAWA, Akio (anazawa@hic-soft.co.jp) Date : 2000/02/15 Machine : IBM ThinkPad 570 (2644-AAJ) (CPU Mobile Celeron 366MHz, HDD 6.4GB (2GB for Win98, rest for FreeBSD), RAM 128MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000130 APM BIOS : OK (1.2) PCIC : Intel 82365DF (5 mem & 2 I/O windows) Cards : - MELCO(LPC2-T) [ETHERNET-CARD-UE-2216] [R02] =========================================================================== LTS ID : 327 Name : YAMAGATA, yoriyuki (yoriyuki@ms.u-tokyo.ac.jp) Date : 2000/02/08 Machine : Dell Inspiron 3500 (CPU Celeron 400, HDD 6G (5G for FreeBSD, 1G for Windows), RAM 64M bytes) FreeBSD : OK (3.3) Pccard Pkg: PAO3-19991019 APM BIOS : OK (1.2) PCIC : TI PCI 1220 CardBus Cards : - TDK MODEM DF5633E Misc Info : Save-to-Disk suspend is N. G. =========================================================================== LTS ID : 326 Name : Akihiro SHIMIZU (akihiro@personal.email.ne.jp) Date : 2000/1/6 Machine : SHARP Mebius PC-PJ2-X3 (CPU Mobile Pentium II 333MHz, HDD 8.1GB, RAM 128MB) FreeBSD : OK (3.3) Pccard Pkg: PAO3-19991011, PAO3-19991220 APM BIOS : OK (1.2) Config Opt: PSM_HOOKAPM PSM_RESETAFTERSUSPEND PCIC : Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) Cards : - AIWA TM-J1281 (ISDN TA) - NTT DoCoMo 9600mkII (MODEM) - Panasonic TO-CAF56K (MODEM) - MELCO CDN-D12EX (Ninja-ATA CD-ROM Drive) - 3Com EtherLinkIII 3C589D (ep0) NG-Cards : - SHARP CE-CD01(CD-ROM) Misc Info : Internal modem cannot be used. Internal ethernet can be used if the BIOS setup flag named "Plug & Play O/S" turns to "No". =========================================================================== LTS ID : 325 Name : Toshiyuki NAKAMIYA (yuki@ouhs.ac.jp) Date : 1999/12/13 Machine : Fujitsu FMV-BIBLO NC13D (CPU Pentium (P54C) 133MHz, HDD 1GB, RAM 32MB) FreeBSD : OK (2.2.8-STABLE) Pccard Pkg: PAO-19990405 APM BIOS : OK (1.2) PCIC : Ricoh RL53C465 Cards : - 3Com EtherLink III 3C589B - 3Com EtherLink III 3C589D Misc Info : Internal modem is availabe as COM2. Sound device is available as SB compatible mode. controller snd0 device sb0 at isa? port 0x220 irq 1 vector sbintr device opl0 at isa? port 0x388 =========================================================================== LTS ID : 324 Name : Toshiyuki NAKAMIYA (yuki@ouhs.ac.jp) Date : 1999/12/13 Machine : SONY VAIO PCG-726 (CPU MMX Pentium (P55C) 200MHz, HDD 2.1GB, RAM 64MB) FreeBSD : OK (2.2.8-STABLE) Pccard Pkg: PAO-19990405 APM BIOS : OK (1.2) PCIC : TI PCI-1131 Cards : - 3COM EtherLink III 3C589B - 3COM EtherLink III 3C589D - Allied-Telesis CentreCOM LA-PCM Misc Info : - Internal modem is available as COM2. - Sound device is availabe as SB compatible mode. controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device opl0 at isa? port 0x388 - IrDA device will be detect as COM3 (but I don't know how to use). device sio2 at isa? port "IO_COM3" tty irq10 vector siointr - With Accelerated-X (Laptop), you need config option as following: options SYSCONS_VTY_RESUME to work correctlly when resuming. =========================================================================== LTS ID : 323 Name : OGURA Masaya Date : 1999/12/13 Machine : Fujitsu FM/V Biblo 5100NC/S (CPU Pentium 100M, HDD 1.6G, RAM 64M) FreeBSD : OK (FreeBSD 3.3R) Pccard Pkg: PAO3-19991011.tar.gz APM BIOS : OK Cards : - CentreCOM LA-PCM =========================================================================== LTS ID : 322 Name : Yoshihiko Sarumaru (mistral@imasy.or.jp) Date : 2000/04/27 Machine : SONY VAIO 505R (PCG-505R) (CPU MMX Pentium 233 MHz, HDD 3GB, RAM 64 MB) FreeBSD : OK (3.4-RELEASE) Pccard Pkg: PAO3-20000106 APM BIOS : OK (1.2) Config Opt: PSM_HOOKAPM, PSM_RESETAFTERSUSPEND PCIC : Ricoh RL5C475/476 [CardBus bridge mode] Cards : - Billionton LNT-10TB (NE2000 compatible; ed) - 3Com Etherlink III (3C589C; ep) - TDK LAK-CD021BX (fe) - Adaptec SlimSCSI (APA-1460D; aic) - Ninja-ATA (PCGA-CD51; wdc) - EPSON FlashPacker 6MB (SunDisk OEM; wdc) - PCM250AM (wdc) # PCM250AM 2.5in HDD adapter card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter" config default "wdc1" any cardio 0x180 10 insert logger -s PCM250AM inserted remove logger -s PCM250AM removed Misc Info : BIOS setting: Plug & Play O/S = No, IrDA = disabled. USB, Audio (ESS1879), Internal Modem (K56flex / V.90) are also available. Speaker volume control by mixer command is something wrong (Fn-F4 work fine). apm -Z doesn't work (Fn-F12 work well). LCD close action does not make suspend. PCM250AM need a wdc? entry which use port 0x180 and above change to pccard.conf. =========================================================================== LTS ID : 321 Name : Chihiro Hokari (chihiro@hokari.kashiwazaki.niigata.jp) Date : 1999/12/12 Machine : Fujitsu FMV-BIBLO MCIX23 (CPU Intel MMX Pentium 233, HDD 4G, RAM 64M) FreeBSD : OK (3.3) Pccard Pkg: PAO3-19991011 APM BIOS : OK PCIC : Ricoh RL5C475 PCI-CardBus Brige Cards : - COREGA FastEther PCC-TX =========================================================================== LTS ID : 320 Name : ANAZAWA, Akio (anazawa@hic-soft.co.jp) Date : 1999/12/12 Machine : IBM ThinkPad 570 (2644-AAJ) (CPU Mobile Celeron 366MHz, HDD 6.4GB (2GB for Win98, rest for FreeBSD), RAM 128MB) FreeBSD : OK (3.3-RELEASE) Pccard Pkg: PAO3-19991007 APM BIOS : OK (1.2) PCIC : Intel 82365DF (5 mem & 2 I/O windows) Cards : - MELCO(LPC2-T) [ETHERNET-CARD-UE-2216] [R02] =========================================================================== LTS ID : 319 Name : Mark Atkinson (darkmark@kuoi.asui.uidaho.edu) Date : 1999/12/08 Machine : Dell Lattitude CPi (CPU 233.87 Mhz 686-Class CPU, HDD 3909MB, RAM 65536K bytes) FreeBSD : OK (3.3-RELEASE) Pccard Pkg: PAO3-19991011 APM BIOS : OK (0x01) Config Opt: none PCIC : TI PCI-1131 PCI-Cardbus Bridge rev 0x01 Cards : - 3com 3C574-TX Fast EtherLink PC Card - Psion Dacom Gold Card Global 56K+Fax Misc Info : DHCP assigned 3C574-TX works even after suspend =========================================================================== LTS ID : 318 Name : Akihiro IIJIMA (aki@jp.freebsd.org) Date : 1999/12/07 Machine : SONY VAIO 505V/CBP (PCG-505V/CBP) (CPU Intel MMX Pentium 300MHz, HDD 4.2GB TOSHIBA MK4309MAT, RAM 64MB) FreeBSD : OK (3.2-R + PAO) Pccard Pkg: ?? APM BIOS : OK (1.2) PCIC : Ricoh RL5C475 PCI-CardBus Brige Cards : - Xircom CompactCard Ethernet 10 (CFE-10) Misc Info : First, Disable IrDA(IRQ 10). PAO installer, select IRQ "Do not use 1-10" sound chip, pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa ESS1879 (rev 11, native mode) =========================================================================== LTS ID : 317 Name : TATEOKA, Takamichi (tate@spa.is.uec.ac.jp) Date : 1999/12/07 Machine : TOSHIBA Dynabook Portage SS3300 (CPU Mobile Pentium-II 266MHz, HDD 6GB, RAM 64MB) FreeBSD : OK (2.2.8-RELEASE) Pccard Pkg: PAO-19990114 APM BIOS : OK (1.2) PCIC : TOSHIBA TOPIC97 / Works on PCIC Compatible mode and Automatic mode Cards : - Megaherts CC10BT/2 ignirq 1 2 3 4 5 6 7 8 9 io 0x240-0x2e0 0x300-0x360 - Laneed LD-CDY ignirq 1 2 3 4 5 6 7 8 9 io 0x240-0x2e0 0x300-0x360 # Laneed LD-10/100CD card "Laneed" "LD-CDY" config default "ed0" any insert echo Laneed LD-10/100CD inserted insert /etc/pccard_ether $device remove echo Laneed LD-10/100CD removed remove /etc/pccard_ether_remove $device - NTT DoCoMo PALDIO 611S PC CARD ignirq 1 2 3 4 5 6 7 8 9 io 0x240-0x2e0 0x300-0x360 - WELLTRONIX WM-3314CIA ignirq 1 2 3 4 5 6 7 8 9 io 0x240-0x2e0 0x300-0x360 # kernel patch is required, refer bsd-nomads:10709 - sanyo SR6 (8MB SmartMedia) + Hagiwara Sys-com SmartMedia Adapter function fixed_disk config 0x01 "wdc1" any insert echo Flash ATA / ATA HDD inserted remove echo Flash ATA / ATA HDD removed # following kernel configuration is required # # controller wdc1 at isa? disable port "0x250" bio irq 10 vector wdintr # disk wd1 at wdc1 drive 0 Misc Info : Following kernel option is required to make hibernation working: options "MAXMEM=(63*1024)" Or, apply kernel patch reported in FreeBSD Problem Report kern/10466. I heard this kernel patch cannot work on 128MB memory model. Hibernation works, but suspend/resume cannot work. I reported some additional hints to bsd-nomads:10709. (in Japanese) =========================================================================== LTS ID : 316 Name : Yoichi NAKAYAMA (yoichi@eken.phys.nagoya-u.ac.jp) Date : 1999/12/06 Machine : SONY VAIO PCG-505V/CBX (CPU MMX Pentium 300MHz, HDD 4.3GB, RAM 64MB) FreeBSD : OK (3.3R + PAO3) APM BIOS : OK (1.2) Cards : - MELCO LPC2-T Misc Info : Sound: OK (pcm0) Internal Modem: OK Hibernation/Suspend by Fn+ESC/F12: OK (hibernation slice was created by phdisk.exe) =========================================================================== LTS ID : 315 Name : TAKEMURA, Gaku (gaku@mbc.sphere.ne.jp) Date : 1999/12/04 Machine : TOSHIBA Libretto ff1050 (CPU Intel Pentium MMX 233MHz, HDD 3.2GByte: Windows98=1.7GByte, FreeBSD=1.4GByte, RAM 96MByte) FreeBSD : OK (FreeBSD 3.3R) Pccard Pkg: PAO3-19991011 APM BIOS : OK (1.2) Config Opt: none PCIC : Toshiba ToPIC97 CardBus Controller, ver007 Cards : - I-O DATA PCET/TX Fast Ethernet LAN Card - TDK V.90/K56flex MODEM Card DF5633E - TDK Digital Cellular Adapter DP9628 # TDK Digital Cellular Adapter DP9628 card "TDK" "DP9628" config auto "sio3" any 0x82 insert logger -s TDK Digital Cellular Adapter DP9628 inserted remove logger -s TDK Digital Cellular Adapter DP9628 removed =========================================================================== LTS ID : 314 Name : M. Meiarashi Date : 1999/12/04 Machine : Toshiba Libretto 70 (CPU MMX Pentium 120MHz, HDD 1.6 GBytes, RAM 32MBytes) FreeBSD : OK (3.3-RELEASE) Pccard Pkg: PAO-19991011 APM BIOS : OK (1.2) PCIC : Intel 82365 Cards : - Toshiba 10/100 Ethernet PC Card IPC5008A # Toshiba 10/100 Ethernet Card card "Toshiba" "10/100 Ethernet PC Card" config auto "xe0" any cardio 0x300 0x10 insert logger -s Toshiba 10/100 Ethernet Card inserted insert /etc/pccard_ether $device remove logger -s Toshiba 10/100 Ethernet Card removed remove /etc/pccard_ether_remove $device Misc Info : [bsd-nomads:12164] =========================================================================== LTS ID : 313 Name : Matthias Kretschmer (schreib_mir_du_spacken@gmx.de) Date : 1999/12/02 Machine : Mitac 5036 (CPU Tillamook 266MHz, HDD Toshiba ???? 4,3 GB, RAM 64 MB SD-Ram) FreeBSD : OK (3.2) APM BIOS : OK (1.2) Config Opt: nothing PCIC : TI PCI-1220 Cards : - ABOCOM LAN/Modem-Card - [56k-Modem (K56Flex+V.90) &] 10 MBit-Ethernet NE2000 comp. - LM560 card "PCMCIAs" "ComboCard" config auto "ed0" any cardio 0x340 0x20 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 312 Name : Olaf Erb (olaf@erb.nu) Date : 1999/12/02 Machine : Dell Inspiron 3500 (CPU Celeron 366, HDD 6.4GB HD, Floppy, CD-ROM, RAM ??) FreeBSD : OK (3.2-RELEASE) Pccard Pkg: PAO-3.2 APM BIOS : OK Config Opt: APM_BATT_LOW_SUSPEND CB_TEST FORCE_IRQ_ROUTING Cards : - D-link DE-660 Ethernet Card - Apollo 56k fax/modem card Misc Info : Sound: OK with Luigis driver XFree: OK with XF86_SVGA (neomagic driver) CardBus: see options in the config file, plain PAO bootdisk didn't work :( You've to install all the stuff from CDROM first, then apply PAO distribution and build a custom kernel. =========================================================================== LTS ID : 311 Name : AOYAGI Yoichi (ao@mo.cs.toyo.ac.jp) Date : 1999/12/02 Machine : TOSHIBA Satellite Pro 430CDT (CPU pentium 120 MHz, HDD 1.3GB, RAM 48 MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980614 APM BIOS : OK Cards : - CyQ've ELA-010 10BASE-T LAN Card card "CyQ've" "ELA-010" config default "ed0" any 0x10 insert echo CyQ've ELA-010 LAN card inserted insert /etc/pccard_ether ed0 remove echo CyQ've ELA-010 LAN card removed remove /sbin/ifconfig ed0 delete =========================================================================== LTS ID : 310 Name : Ouchi Atsuo (vorspiel@duelists.org) Machine : Toshiba Libretto70 (CPU MMX Pentium 120MHz, HDD 1.6Gbyte(FreeBSD partition is about 800Mbyte), RAM 32Mbyte) FreeBSD : OK (2.2.7) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) Config Opt: nothing PCIC : Intel 82365A/B (5 mem & 2 I/O windows) Cards : - EPSON FlashPacker 10MB(Flash ATA; SunDisk-OEM) - I/O Data PCCF-30M(CompactFlash; SunDisk-OEM) - Melco CDN-D8C(IDE CD-ROM drive) - NTT Docomo (formerly NTT Personal) Paldio 321S(PHS with PC Card) card "NTT Personal" "32K Paldio 321S PC CARD" config 0x22 "sio2" any 0x40000 insert echo NTT Personal Paldio 321S PC Card inserted remove echo NTT Personal Paldio 321S PC Card removed - TDK LAK-CD021BX(10base-T) Misc Info : I use the sound device in MSS mode with Luigi's Sound Driver. device pcm0 at isa? port ? irq 5 drq 1 flags 0x0 vector pcmintr =========================================================================== LTS ID : 309 Name : Tatsuya TANIKAWA (tanikawa@fs.kyoto.omronsoft.co.jp) Machine : TOSHIBA DynaBook SS-R 575 (CPU Pentium/P54C 75MHz, HDD 2067MB / TOSHIBA MK2103MAV, RAM 40MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.0 compatible mode) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH ATAPI_DETACH PCIC : Intel 82365A/B (or clones) Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460 - D-link DE-650 Ethernet Card - Microtech XpressDock =========================================================================== LTS ID : 308 Name : Liang Tai Hwa (avatar@www.mmlab.cse.yzu.edu.tw) Machine : Twinhead Slimnote VX2 266TG (CPU Intel Pentium II 266MHz, HDD 4.3Gbytes, RAM 64Mbytes) FreeBSD : No problem (2.2.7-RELEASE) APM BIOS : No problem (1.1 (Linux reports 1.2)) Config Opt: APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, ATAPI_DETACH PCIC : TI PCI-1221 PCI-CardBus Bridge NG-Cards : - D-Link DE-660 ("ed0: device timeout" under FreeBSD 2.2.7R PAO; however, this card works perfectly under Windoze98 & Linux(with pcmcia-cs-3.0.6)) Misc Info : Need XFree86-3.3.3 to run X =========================================================================== LTS ID : 307 Name : Nobuyoshi SATO (jju@mo.cs.toyo.ac.jp) Machine : Panasonic Let's Note CF-M32J8 (CPU MMX Pentium 166MHz, HDD 2GB, RAM 32MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (APM 1.1 (APM 1.2 on Windows98)) PCIC : TI PCI-1250 Cards : - corega Ether PCC-T =========================================================================== LTS ID : 306 Name : FUJITA,Wataru (wfujita@net.nagasaki-u.ac.jp) Machine : IBM ThinkPad235 2607-10J (CPU CPU MMX Pentium 233MHz, HDD 3253MB, RAM 96MB) FreeBSD : OK (2.2.7 release) Pccard Pkg: PAO-980912 APM BIOS : OK (APM BIOS version 1.1) PCIC : RICHO RL5C476 Cards : - Melco LPC2-T # Melco LPC2-T card "MELCO" "LPC2-T" config 0x22 "ed0" 15 0x10 ether 0x1c0 00:40:26 insert echo MELCO LPC2-T inserted insert /etc/pccard_ether $device remove echo MELCO LPC2-T removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 305 Name : Ko Nonomura (nonomura@mb.infoweb.ne.jp) Machine : Libretto SS 1000 (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32M) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) PCIC : Tohiba ToPIC97 PCI-CardBus Bridge Cards : - ACCTON EN2216 Misc Info : APM works, but I can use only Memory resume mode, I can not use suspend to HDD. =========================================================================== LTS ID : 304 Name : Nobuaki NAKATSUBO (KGG02005@nifty.ne.jp) Machine : Hitachi Prius 210G (2109T16G) (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) Config Opt: PCIC_IRQ!=5 PCIC : RICOH RL5C475/RL5C476 Cards : - MELCO IFC-SC2 - Allied Telesis CentreCOM LA-PCM Misc Info : The PAO-980913 can operate the card slots through the "CardBus" setting. All devices get inactive except fdc0, ncv0, wdc0, sc0, pcic0 on the installing. This is a safe way to detect a SCSI device in a short time. IRQ5 should be excluded in the PAO-980913 installation to avoid a confliction between the pcic0 and a sound card. =========================================================================== LTS ID : 303 Name : MITSUNAGA Noriaki (mitchy@er.ams.eng.osaka-u.ac.jp) Machine : COMPAQ CONTURA AERO 4/33C (CPU 486SX-33MHz, HDD 2.1GB, RAM 20MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-snap-981026 APM BIOS : OK (1.1) PCIC : VLSI 82C146 Cards : - TDK LAK-CD021AX - TDK LAK-CD021BX - Media Intelligent MSC-110 - TDK DF2814 - Megaherts XJ2144 - TOSHIBA FDDPCCM1 - IBM CD-20X =========================================================================== LTS ID : 302 Name : Dan Kogai (dankogai@dan.co.jp) Machine : Sharp Mebius PC-PJ1-98 (CPU MMX Pentium 233MHz, HDD 4.3MB, RAM 64MB) FreeBSD : OK (2.2.7-RELEASEVersion number of FreeBSD) Pccard Pkg: boot-pao.flp (PAO-980913_tar.gz) APM BIOS : OK (1.1) Config Opt: PSM_HOOKAPM, PSM_RESETAFTERSUSPEND PCIC : Ricoh RL5C475 PCI-CardBus Brige Cards : - 3Com Etherlink III 3C589B (ep0) - TDK LAK-CD021AX (fe0) NG-Cards : - Sharp CE-CD01 Misc Info : * If you used Win98 or reset BIOS setups prior to FreeBSD boot, make sure you COLD-START (shutdown and turn on the power, not reboot) or PC card will not be probed properly (This symptom was present in DOS). * With the machine cold-started, boot-pao installation was fine. I first made FreeBSD partition with FIPS 1.5 and chose NFS installation. * CE-CD01 is supposed to work as ATA card but the driver fails to configure wdc1. Hmm.... * options above are required to use track pad correctly. * For XF86, NeoLogic Driver is available at http://www-cv.mech.eng.osaka-u.ac.jp/~okada/FreeBSD/NeoMagic/NeoMagic.html (Thank you, Mr. Okada!). Make sure you config your kernel with options above. =========================================================================== LTS ID : 301 Name : Noritaka Suzuki (nosu@mail.wbs.ne.jp) Machine : IBM ThinPad 235 (CPU MMX Pentium233, HDD 3.2G, RAM 64M) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: 227R-PAO-980913 APM BIOS : OK (1.1) PCIC : Ricoh RL5C476 PCI-CardBus Brige Cards : - corega FastEther PCC-TX # COREGA Ether PCC-TX card "corega K.K." "corega FastEther PCC-TX" config default "ed0" any insert echo corega FastEther PCC-TX inserted insert /etc/pccard_ether $device remove echo corega FastEther PCC-TX removed remove /etc/pccard_ether_remove $device Misc Info : 100BASE-TX =========================================================================== LTS ID : 300 Name : Hironao Kobayashi (hkobayashi@accs.or.jp) Machine : DELL Inspiron 3200 (CPU PentiumII 266MHz, HDD 4Gbyte(2GByte:Win98,FreeBSD:2GByte), RAM 128Mbyte) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980912 APM BIOS : OK (1.1) PCIC : Texas Instruments PCI-1131 CardBus Cards : - FMV-J182A(Ethernet Card) =========================================================================== LTS ID : 299 Name : SATO Takeshi (tasato@lab.keihin.nkk.co.jp) Machine : Panasonic Let's note CF-S21 (CPU MMX Pentium 200MHz, HDD 3.2GB, RAM 96MB) FreeBSD : OK (2.2.7) APM BIOS : OK (1.1) PCIC : TI PCI-1250 Cards : - RATOC REX-9530 - 3Com 3C-589D-Combo Misc Info : ignore irq 5,10 pc-cards are using irq 9, 15 =========================================================================== LTS ID : 298 Name : Takayuki Uchikoba (arkun@momokohouse.rim.or.jp) Machine : NEC PC-9821Ns (CPU 486DX2-50MHz, HDD 340MBytes, RAM 14MBytes) FreeBSD : OK (2.2.6-RELEASE Rev02 + PAO-980430 + PAO-980430-pc98-patch) APM BIOS : OK (APM BIOS version 1.4) PCIC : Cirrus Logic PD672X Cards : - NTT Personal 32K Paldio 321S PC CARD card "NTT Personal" "32K Paldio 321S PC CARD" config 0x22 "sio3" pio insert echo NTT Personal 32K Paldio 321S PC CARD inserted remove echo NTT Personal 32K Paldio 321S PC CARD removed - SII PHS DATA LINK MC-P100 card "SII" "PHS DATA LINK" config 0x22 "sio3" any insert echo SII PHS DATA LINK MC-P100 inserted remove echo SII PHS DATA LINK MC-P100 removed - NTT DoCoMo Mobile D Card 96P1 card "NTT DoCoMo" "Mobile D Card 96P1" "MDC96P1" config 0x22 "sio3" any insert echo NTT DoCoMo Mobile D Card 96P1 inserted remove echo NTT DoCoMo Mobile D Card 96P1 removed - MICROCORE MC144PC - PLANEX ENW-3502-T =========================================================================== LTS ID : 297 Name : Lee, Jae Hong (jhlee00@chollian.net) Machine : IBM ThinkPad 560, Type 2640 (CPU Intel Pentium. 586, HDD 1G (600M Dos, 400M FreeBSD), RAM 40M) FreeBSD : OK (2.2.7) Pccard Pkg: PAO 980913 APM BIOS : NG (1.1) PCIC : Cyrrus Logic PD6729/6730 Cards : - IBM PCMCIA 33.6/14.4 Data/Fax Modem # IBM PCMCIA 33.6/14.4 Data/Fax Modem card " " "PCMCIA 33.6/14.4 Data/Fax Modem" config 0x23 "sio1" 3 reset 1000 insert echo IBM PCMCIA 33.6/14.4 Data/Fax Modem inserted remove echo IBM PCMCIA 33.6/14.4 Data/Fax Modem removed NG-Cards : IBM Portable 4X Speed CD-ROM Drive CD-400 Misc Info : ===== 1. PCMCIA Modem works well. 2. but CD-ROM Drive doesn't work, because pccard daemon doesn't probe CDROM card. When I insert cdrom card, it issues following message. Sometimes it issues "Probe failed" immediately before Attach Failed. And then, sometimes it issues same message twice. myname# Sep 25 18:39:47 myname /kernel: Card inserted, slot 0 Sep 25 18:39:47 myname /kernel: Card inserted, slot 0 Sep 25 18:39:50 myname pccardd[36]: Card "IBM"("PCMCIA CD-ROM Drive CD-400") [^?] [] matched "IBM" ("PCMCIA CD-ROM Drive CD-400") [(null)] [(null)] Sep 25 18:39:50 myname pccardd[36]: Card "IBM"("PCMCIA CD-ROM Drive CD-400") [^?] [] matched "IBM" ("PCMCIA CD-ROM Drive CD-400") [(null)] [(null)] Sep 25 18:39:53 myname /kernel: Attach Failed Sep 25 18:39:53 myname /kernel: Attach Failed Sep 25 18:39:53 myname /kernel: Return IRQ=15 Sep 25 18:39:53 myname /kernel: Return IRQ=15 Sep 25 18:39:53 myname pccardd[36]: driver allocation failed for IBM (Device not configured) Sep 25 18:39:53 myname pccardd[36]: driver allocation failed for IBM (Device not configured) Sep 25 18:39:58 myname /kernel: Card removed, slot 0 Sep 25 18:39:58 myname /kernel: Card removed, slot 0 3. I don't use apm. ====== The content of execution of "dmesg" is as follows ========: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-RELEASE #0: Fri Sep 25 18:15:02 KST 1998 root@myname.my.domain:/usr/src/sys.PAO/compile/THINKPAD.PAO CPU: Pentium/P54C (132.96-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38813696 (37904K bytes) Initializing PC-card drivers: sio wdc Probing for devices on PCI bus 0: chip0 rev 2 class 60000 on pci0:0:0 chip1 rev 3 class 68000 on pci0:1:0 vga0 rev 211 class 30000 int a irq ?? on pci0:3:0 pcic0 rev 226 class 60500 int a irq ? on pci0:19:0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 not found at 0x2f8 lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 npx0 flags 0x1 on motherboard npx0: INT 16 interface pcic0 at 0x3e0-0x3e1 irq 11 flags 0x1 on isa PC-Card ctlr(0) Cirrus Logic PD-6729/6730 [i82365 compatible mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 pcic0: slot 1 controller I/O address 0x3e0 sb0 at 0x220 irq 5 drq 1 on isa Sb0: Intel Pentium F00F detected, installing workaround ========Kernel Config file is as follows ===================: # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: LTS.txt,v 1.1.1.15 2001/11/30 07:01:06 toshi Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" ident THINKPAD maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options "MAXMEM=(40*1024)" options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options APM_PCCARD_RESUME options PCIC_RESUME_RESET #options SCSI_DETACH options ATAPI_DETACH config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. tape ft0 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd1 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM #device wfd0 #IDE floppy (LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 #controller ahc0 #controller dpt0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #ontroller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector sea intr #options DPT_MEASURE_PERFORMANCE # Required by DPT driver?? #options DPT_VERIFY_HINTR # Some hardware must have it! #options DPT_TRACK_CCB_STATES # Some hardware must have it! #options DPT_HANDLE_TIMEOUTS # Some hardware must have it! #options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more #controller scbus0 #device sd0 #device od0 #See LINT for possible `od' options. #device st0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # Don't remove these two lines ! pseudo-device card 1 # PCCARD (PCMCIA) support #controller card0 device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr #device pcic1 at isa? port 0x3e2 device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmin tr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device tx0 #device vx0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr #device cs0 at isa? disable port 0x300 net irq ? vector csintr # Audio Drivers controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG #options DDB =========================================================================== LTS ID : 296 Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu, Tokyo-Rika-Daigaku) (sakai@miya.ee.kagu.sut.ac.jp) Machine : DELL Latitude CP M166ST (CPU MMX Pentium 166MHz, HDD 4.0GB, RAM 32MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (APM BIOS version 1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : TI PCI-1131 [CardBus bridge mode] Cards : - Logitec LPM-LN20T (Ethernet Card) - Adaptic SlimSCSI APA-1460J =========================================================================== LTS ID : 295 Name : Gerd Heber (heber@capsl.udel.edu) Machine : Toshiba SatellitePro 445 CDX (CPU Intel Pentium 133 MHz MMX, HDD 1.4 GB, RAM 32 MB) FreeBSD : No problem (2.2.6, 2.2.7) Pccard Pkg: PAO-980913 APM BIOS : No problem (1.1) Config Opt: NO PCIC : PC-Card ctlr(0) Intel 82365A/B (5 mem & 2 I/O windows) Cards : - 3Com Etherlink III, 3C589D - US Robotics Megahertz XJ-CC4288 =========================================================================== LTS ID : 294 Name : Jeroen Ruigrok van der Werven (asmodai@wxs.nl) Machine : Dell Latitude CP (CPU Pentium MMX 233 MHz, HDD 2 GB, RAM 64 MB) FreeBSD : Have installed it a number of times OK (2.2.6, 2.2.7, 3.0-SNAP May) APM BIOS : The standard apm doesn't work, haven't tried the FORCE option yet (dunno) Config Opt: none Misc Info : Used the C/Port Replicator with it, works good, detects vx0, have yet to test it... =========================================================================== LTS ID : 293 Name : Toshiyuki Kawashima (tos@fa2.so-net.ne.jp) Machine : Panasonic AL-N1T512J5 (CPU Pentium 120MHz, HDD 4GB, RAM 48MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Allied Telesis Ethernet Card LA-PCM - Microtech XpressDock #XpressDock card "Microtech International Inc." "IDE PCCARD" config default "wdc1" any 0x2000 cardio 0x170 0x10 insert echo XpressDock inserted remove echo XpressDock removed =========================================================================== LTS ID : 292 Name : HASEGAWA Tomoki (thasegawa@mta.biglobe.ne.jp) Machine : Toshiba DynaBook Portege 660CDT/1.4 (CPU Pentium 150MHz, HDD 6.4GB(MK-6409MAV), RAM 80MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) PCIC : Intel 82365A/B Cards : - NOTEWORTHY NW288CR - TAXAN ICD-400PN (KME KXLC002) - NTT Personal Paldio Data Card DC-1P - NTT Personal Paldio Data Card DC-2P - Just Cooler for Notebook NB-100 - DATAFAB PCMMD2 # DATAFAB PCMMD2 card "DATAFAB" "PCMCIA-TO-IDE" config 0x2 "wdc2" any insert echo DATAFAB PCMMD2 inserted remove echo DATAFAB PCMMD2 removed Misc Info : To use PCMMD2 as wdc2 on this machine with the internal CR-ROM drive, it is necessary to rebuild a kernel with a configuration below. controller wdc2 at isa? port 0x160 bio irq 12 vector wdintr Just Cooler(an external fan) also work well without any drivers and configurations. =========================================================================== LTS ID : 291 Name : SETA Takuji (sheta@kk.iij4u.or.jp) Machine : Toshiba DynaBook Satellite Pro 430CDS (CPU Pentium/P54C 120MHz, HDD 1.3GB/TOSHIBA MK1301MAV, RAM 48MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH ATAPI_DETACH APM_BROKEN_STATCLOCK PCIC : Intel 82365A/B Cards : - AIWA PV-JF3360 - Adaptec SlimSCSI APA-1460J Misc Info : ESS ES688 Audio Drive(SoundBlaster Pro Compatible) default IRQ = 5 -> IRQ = 9 device sb0 at isa? port 0x230 irq 9 conflicts drq 3 vector sbintr zzz and shutdown -x command works good. =========================================================================== LTS ID : 290 Name : Toru AKIYAMA (akiyama@ma1.seikyou.ne.jp) Machine : SUSTEEN S-NOTE (CHANDRA NP-30J) (CPU MMX Pentium 133MHz, HDD 1GByte, RAM 40MByte) FreeBSD : OK (FreeBSD 2.2.7) Pccard Pkg: PAO-snap-981102 APM BIOS : OK (1.2) PCIC : Texas Instruments PCI1130, Ricoh RF5C296 Cards : - BILLIONTON LNT-10TB Ethernet PCMCIA Adapter - Ratoc REX9530 - COREGA FastEther PCC-TX =========================================================================== LTS ID : 289 Name : Masakazu Higaki (higaki@hq.kishou.go.jp) Machine : SHARP Mebius PC-PJ1 (CPU MMX Pentium 233MHz, HDD 3GB, RAM 64MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-227-980908-snap APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET ATAPI_DETACH "APM_NOSUSPEND_IMMEDIATE=3" APM_BROKEN_STATCLOCK PCIC : Ricoh RL5C475 PCI-CardBus Brige Cards : - 3Com Etherlink III 3C589B - IO DATA CBIDE bundled with CDP-FX24 (16bit mode only) # IO Data CBIDE (bundled with CDP-FX24, etc.) card "WIT" "IDE16" config default "wdc1" any insert echo IO Data CBIDE inserted remove echo IO Data CBIDE removed Misc Info : hybernation and suspend is OK.. but sometimes 3C589B(ep0) is not probed after resume. when operate PS/2 mouse after resume, kernel shows error messages: /kernel: psmintr: out of sync (0000 != 0008). /kernel: psmintr: out of sync (00c8 != 0008). : and not respond to mouse button. then uncomment #define PSM_HOOKAPM #define PSM_RESETAFTERSUSPEND in /sys/i386/isa/psm.c and recompile. using IO Data CBIDE, the dip switch on the card must be set 16bit mode. (not probed in CardBus mode) =========================================================================== LTS ID : 288 Name : Osamu Matsuda (omatsuda@eng.hokudai.ac.jp) Machine : Hitachi Flora Prius Note 250 NU1 (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.5-Release) Pccard Pkg: PAO-snap-980317 APM BIOS : OK (1.1) PCIC : PCI-1131 Cards : - 3COM 3C589D - Panasonic TO-CAF56K Misc Info : 1) Disabled COM2, USB, and Sound devices. 2) Suspend does not work when the TO-CAF56K modem card is inserted. 3) Booting takes very long time (longer than 5 min) when the CD-ROM dri ve is presented. 4) XFree86 3.3.1 runs with 1024x768 mode. =========================================================================== LTS ID : 287 Name : Yuishi Iwasaki (iwasaki@wisdom.dse.ibaraki.ac.jp) Machine : SHARP Mebius PC-PJ1 (CPU MMX Pentium 233MHz, HDD 3.2GB (1.3GB FreeBSD), RAM 64MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-freebsd227-980805-snap.tar.gz APM BIOS : OK (1.1) PCIC : Ricoh RL5C475 CardBus Controller Cards : - 3Com Etherlink III 3C589D card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device Misc Info : Using FIPS(ver.1.5c) to split the harddisk partitions. Installing FreeBSD-2.2.7R from a DOS partition. XFree86 3.3.2 with XF86_SVGA-NeoMagic128V-2.2.6R.tgz for 800x600 screen (MeoMagic) is OK. =========================================================================== LTS ID : 286 Name : Hiromichi Kawaguchi (guzi@imasy.or.jp) Machine : NEC PC-98 mobio NX MB12C (CPU MMX Pentium 120Mhz, HDD 1.6GB, RAM 48MB) FreeBSD : OK (FreeBSD 2.2.6R) Pccard Pkg: PAO-980430 APM BIOS : OK (APM BIOS version 1.1) PCIC : Cirrus Logic PD6710 Cards : - Kingmax Technology Inc. PCMCIA K56Flex # PCMCIA MAKER FM5600-LJ DataFax card "PCMCIA MAKER" "FM5600-LJ DataFax" config default "sio2" any reset 100 insert echo PCMCIA MAKER 56K modem inserted remove echo PCMCIA MAKER 56K modem removed =========================================================================== LTS ID : 285 Name : Kenji Suzuki (kenji@po.ganseki.ne.jp) Machine : SONY VAIO 505G (PCG-505G) (CPU MMX Pentium 200MHz, HDD 2.1GB, RAM 64MB) FreeBSD : OK (2.2.6R) Pccard Pkg: 2.2.6-RELEASE (980629) APM BIOS : OK (1.1) PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - 3Com Etherlink III 3C589D Misc Info : See http://www.inseki.gr.jp/~kenji/vaio505/ =========================================================================== LTS ID : 284 Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp) Machine : ThinkPad 235 (Chandra II) (CPU MMX Pentium 233MHz, HDD 3.2GB, RAM 96MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-snap-980805 APM BIOS : OK (APM 1.1 (APM 1.2 On Windows98)) PCIC : RICOH Cards : - Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem) card "Xircom" "CreditCard Ethernet" config 0x27 "sio2" any insert echo Xircom CEM56 Card inserted as Modem remove echo Xircom CEM56 Card removed - TDK LAK-CD021AX NG-Cards : - IBM Portable Hard Disk Misc Info : I set PCIC mode by BIOS setup follow: PCIC 1,2: compatible (not CARD BUS) PCIC 3 : compatible (not ZV PORT) USB : not use IRQ - CEM56 dose not work as Ethernet card. It works good as modem over 28.8k speed. But sio driver sometimes hung with "over flow" message. So, to use ppp without overflow, I wrote ppp.conf follow: default: set device /dev/cuaa2 set speed 230400 - IBM Portable Hard Disk use "IDE Card". So I try to use it with the pccard.conf same as "IBM CD-20XSeries(IDE PC Card) " But it dose not work. - SUSPEND/RESUME problem After suspend/resume, kernel warns "calcru: negative time -XXXX". If it has happened, machine may un-stable. It seems a bug of CPU clock get routine in apm_default_resume() of apm.c. I add follow code for apm.c. (you can see it in Subject: [bsd-nomads:05690] sotec WinBookBird Message-ID: <97Oct16.182150jst.14979@gateway.suri.co.jp> ) and add the option "CLK_USE_I586_CALIBRATION". Then the problem does not occur with my chandra :-) *** apm.c.orig Tue Oct 14 11:10:04 1997 --- apm.c Thu Oct 16 12:31:32 1997 *************** apm_default_resume(void *arg) *** 396,401 **** --- 396,405 ---- log(LOG_NOTICE, "resumed from suspended mode\ "); } else { + bootverbose = 0; + startrtclock(); + cpu_initclocks(); + /* modified for adjkerntz */ pl = splsoftclock(); inittodr(0); /* adjust time to RTC */ =========================================================================== LTS ID : 283 Name : FUJIMOTO, Kou Machine : Fujitsu FMV-5100 NL/T (CPU Pentium 100Mhz, HDD 810Mbyte, RAM 24Mbyte) FreeBSD : OK (2.2.6-RELEASE) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6729 Cards : - Megahertz XJ10BT - 3Com EtherLink III (3C589C) - Ricoh Flash ATA 5MB Misc Info : WIDE-dhcpc with Megahertz Ethernet card fails to negotiate with DHCP server while it succeeds with 3Com EtherLink III. Megahertz Ethernet card fails to ping to some other host with 10/100Base-TX NIC on the same subnet. Sound device (ESS1868) works well with Luigi's driver. =========================================================================== LTS ID : 282 Name : Toru AKIYAMA (akiyama@ma1.seikyou.ne.jp) Machine : ThinkPad365XD (CPU Pentium 120MHz, HDD 1Gbyte, RAM 24MByte) FreeBSD : OK (FreeBSD 2.2.6) Pccard Pkg: PAO-snap-980720 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - BILLIONTON LNT-10TB Ethernet PCMCIA Adapter card "Billionton" "LNT-10TB" config default "ed0" any insert echo BILLIONTON LNT-10TB Ethernet PCMCIA Adapter inserted insert /etc/pccard_ether $device remove echo BILLIONTON LNT-10TB Ethernet PCMCIA Adapter removed remove /etc/pccard_ether_remove $devic =========================================================================== LTS ID : 281 Name : YAMAUCHI Hitoshi (yamauchi@is.uec.ac.jp) Machine : IBM ThinkPad 600 (model:2645-51J) (CPU PentiumII 266MHz, HDD 4GB, RAM 96MB) FreeBSD : Tips (2.2.6 PAO) APM BIOS : OK (APM BIOS version 1.1) Config Opt: (none) PCIC : TI-PCI-1250 (i82365 compatible mode) Cards : - Allied Telesis Ethernet LAN adapter (CentreCOM LA-PCM-T : NE2000 compatible) Misc Info : (I can not success the install when main memory size is larger than 64M with boot floppy of 2.2.5, 2.2.5+PAO, 2.2.6, 2.2.6+PAO, 2.2.7. I installed FreeBSD 2.2.6 with 32MB main memory and rebuild kernel with option "MAXMEM=97728". 97728 means 1024 * 96 - 576. Then, shutdown and equip 32MB + 64MB memory and then, FreeBSD will be work after rebooting.) =========================================================================== LTS ID : 280 Name : Akihiro Uehara (u-akihir@ms.aist-nara.ac.jp) Machine : PC98-NX Lavie NX LT23/44A (CPU Pentium II 233MHz, HDD 3.2GByte, RAM 64MByte) FreeBSD : OK (2.2.6-RELEASE) APM BIOS : OK (1.1) Cards : - IC-CARD Ethernet =========================================================================== LTS ID : 279 Name : Toshimitsu Miyake (miyake@nalgo.co.jp) Machine : Panasonic Let's note CF-S21 (CPU MMX Pentium 200MHz, HDD 3.2GB, RAM 96MB) FreeBSD : OK (FreeBSD-2.2.6R) APM BIOS : OK (APM BIOS version 1.1) PCIC : TI PCI-1250 [i82365 compatible mode] Cards : - 3Com Etherlink III PCMCIA 3C589D - MACNICA MIRACLE SCSI-II mPS110 =========================================================================== LTS ID : 278 Name : Jun KOBAYASHI (jun@nextsolution.co.jp) Machine : FUJITSU FMV-5100NC/S (CPU Intel Pentium 100MHz, HDD 814M, RAM 32Mbytes) FreeBSD : NG (2.2.6R) APM BIOS : OK (1.1) PCIC : ed Cards : - Billionton LNT-10TB # Billionton EthernetPC card card "Billionton" "LNT-10TB" config default "ed0" any 0x10 insert echo Billionton Ethernet Card inserted insert /etc/pccard_ether $device remove echo Billionton Ethernet Card removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 277 Name : Takashi SHIRAI (shirai@nintendo.co.jp) Machine : HITACHI Prius note 210g (RIOS SYSTEMS Chandra2) (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 96MB) FreeBSD : OK (2.2.6-Release) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) Config Opt: PCIC_IRQ=10 PCIC : RICOH RL5C475/RL5C476 Cards : - Planet Smart COM/3500 ENW-3500-T - Macnica Miracle SCSI-II mPS110 (for PIONEER PCP-PR1) NG-Cards : - IBM CD-400 (It can be used alone, but cannot be used with other cards) Misc Info : Recent PAO cannot use CardBus, to change setting of BIOS from "CardBus" to "PCMCIA compatible". But, BIOS setup is displayed with Japanese language, then those who cannot read Japanese will not be able to setup. When installing, you should choose "start kernel configuration..." and make the all unnecessary devices inactive, for killing the conflicted devices and plobing the SCSI CD-ROM. In config file, the line as "device pcic0" must be changed, from "irq 5" to "irq 9". =========================================================================== LTS ID : 276 Name : Kenji Yamauchi (QYL01113@nifty.ne.jp) Machine : NEC mobio NX MB12 CUD (CPU MMX-Pentium-120MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-19980430 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6710 Cards : - TDK Ethernet LAC-CD021BX - NTT Personal Paldio Data Card DC-1S =========================================================================== LTS ID : 275 Name : Kazunori Aoshima Machine : Compaq Contura aero 4/25 (CPU 486SX-25, HDD 500MHz, RAM 20MHz) FreeBSD : OK, but some APM and serial patches needed. (2.2.5R) Pccard Pkg: PAO-971207 APM BIOS : OK, but pathe need. (APM 1.1) Config Opt: options "CONTURA" PCIC : normal PCIC Cards : - D-Link DE-660 - IBM PCMCIA SCSI NG-Cards : - Contura aero PCCARD Floppydisk / Y-E data Misc Info : some patches needed. 2.2.6R PAO boot floppy cannnot work when install. PCIC device isn't work. =========================================================================== LTS ID : 274 Name : Takuro Onoue (tomotaka@po.synapse.or.jp) Machine : Caravelle Topper (CPU AMD 5x86 PR75, HDD 810MB, RAM 36MB) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) PCIC : RICOH RF5C396 Cards : - MACNICA MIRACLE SCSI II mPS-110 - TDK3313BZ =========================================================================== LTS ID : 273 Name : Tomoyuki SUZUKA (suzuka@spa.is.uec.ac.jp) Machine : HITACHI Flora 210 NL2 (Chandra 2) (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 compatible Cards : - Planet Smart COM 3500 - Laneed Ethernet Card - SII PHS DATA 32S - IO DATA PCFDC2-ADP(SmartMedia adapter) =========================================================================== LTS ID : 272 Name : Yoshiaki UCHIKAWA (yoshiaki@kt.rim.or.jp) Machine : Libretto 70/CT (CPU MMX Pentium 120MHz, HDD 1.6GB (IBM DDLA-21620), RAM 32MHz) FreeBSD : OK (2.2.6R) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - ELECOM Laneed LD-CDY Misc Info : device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr Luigi's Sound driver(pcm0) can work. pcm0 at 0x530 irq 5 drq 1 flags 0xa200 on isa mss_attach 0 at 0x530 irq 5 dma 1:1 flags 0xa200 =========================================================================== LTS ID : 271 Name : AOYAGI Yoichi (ao@mo.cs.toyo.ac.jp) Machine : TOSHIBA Satellite Pro 430CDT (CPU pentium 120 MHz, HDD 1.3GB, RAM 48 MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980614 APM BIOS : OK Cards : - CyQ've ELA-010 10BASE-T LAN Card card "CyQ've" "ELA-010" config default "ed0" any 0x10 insert echo CyQ've ELA-010 LAN card inserted insert /etc/pccard_ether ed0 remove echo CyQ've ELA-010 LAN card removed remove /sbin/ifconfig ed0 delete =========================================================================== LTS ID : 270 Name : KIZAKI Yoshio (GFG01633@nifty.ne.jp) Machine : Toshiba Libretto30 (CPU DX4(100MHz) equivalent, HDD 1.6GB(IBM-DDLA-21620), RAM 20MB) FreeBSD : OK (2.2.5) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - REX5536M card "PCMCIA SCSI2 CARD" "01" config 0x5 "stg0" any 0 insert echo REX5536M inserted remove echo REX5536M removed - LAK-CD021BX =========================================================================== LTS ID : 269 Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp) Machine : MITSUBISHI apricot FX(M3484-B1C0) (CPU Pentium 120MHz, HDD 810MB, RAM 40MB) FreeBSD : OK (FreeBSD 2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : NG (1.1) PCIC : Cirrus Logic PD672X Cards : - TDK LAK-CD021 - TDK LAK-CD021BX Misc Info : While installing I disabled the sound device. Executing apm command makes panic. But can suspend with suspend button(not apm -z). Cannot power off with shutdown -x. Sound device was set with BIOS to use I/O address to 0x220-, irq to 9, 8bit DMA to 1 and 16bits DMA to 5. =========================================================================== LTS ID : 268 Name : Susumu Harano (harano@astec.co.jp) Machine : Libretto 100CT PA1254C9 (CPU Pentium MMX 166MHz, HDD 2.1GB, RAM 32MB+32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK PCIC : Intel 82365 Cards : - Corega Ether PCC-T =========================================================================== LTS ID : 267 Name : Ken Seggerman (suleyman@echonyc.com) Machine : Toshiba Satellite 305CDS (CPU Pentium 486, HDD 1.51 GB (1547 MB Windows95 PriDOS 496 MB FreeBSD, 16 MB ExDOS), RAM 80 MB) FreeBSD : No problem, Installed from CD and re-installed from PAO-boot.flp (Version number of FreeBSD) Pccard Pkg: PAO-boot.flp for 2.2.5 APM BIOS : No problem PCIC : Toshiba ToPIC97 CardBus Controller NG-Cards : - Copied "Xircom" "CreditCard Modem Ethernet" section from pccard.conf.sample, and altered product string to match probed string "Xircom" "CreditCardModem CM-56T" but does not work. Error: pccard[41] no card on database... Xircom CreditCard Modem CM-56 I tried changing the card line in conf to match my modem, and tried it the original way. I left everything else alone. User PPP accessed the modem without complaint, there was no dial tone, the lights on the modem cable dongle did not light up and User PPP reported: dial failed Misc Info : I was very encouraged to see an entry in the pccard.conf.sample for a Xircom Modem, but could not get it to work. I am about to give up and get myself another modem for the laptop. Any advice would be welcome. Thank you. =========================================================================== LTS ID : 266 Name : Ryusuke Kikuchi (kikuchi@grad.sccs.chukyo-u.ac.jp) Machine : Panasonic Let's note AL-N2T520J5 (CPU MMX Pentium 200MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Telecom Device SuperSocket RE450T card "Telecom Device K\\.K\\." "SuperSocket RE450T" config 0x2 "ed0" any # ether 0x110 09:57:42 insert echo Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove echo Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device - Adaptec SlimSCSI =========================================================================== LTS ID : 265 Name : kondo hiroshi (kondo@csctk.jcsnet.ro.jp) Machine : FMV-5133NP5/W (CPU Pentium-133, HDD 1.2G, RAM 32M) FreeBSD : OK (FreeBSD2.2.6-RELEASE) PCIC : TI PCI-1130 Cards : - 3C589C - 3C589D-COMBO =========================================================================== LTS ID : 264 Name : namiki takeo (namiki@din.or.jp) Machine : Toshiba Libretto-20 (CPU AMD Am486DX4/75MHz, HDD 258MB, RAM 16MB (8+8)) FreeBSD : OK (2.2.6) Pccard Pkg: boot-ja-pao-980517.flp APM BIOS : OK Cards : - NEC PC-9801N-J03 - Megahertz XJ10BT =========================================================================== LTS ID : 263 Name : Katsuhiro OGUCHI Machine : PC-9821 la10 (CPU Intel Pentium 100MHz, HDD 810M, RAM 40MB) FreeBSD : OK (2.2.1) APM BIOS : OK (1.11) Cards : - REX-5535 =========================================================================== LTS ID : 262 Name : Tatsuya TANIKAWA (tanikawa@fs.kyoto.omronsoft.co.jp) Machine : TOSHIBA DynaBook SS-R 575 (CPU Pentium 75MHz, HDD 2067MB / TOSHIBA MK2103MAV, RAM 40MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.0 compatible mode) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH PCIC : Intel 82365 (or clones) Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460 - D-link DE-650 Ethernet Card - Microtech XpressDock # Microtech XpressDock card "Microtech International Inc\\." "IDE PCCARD" config default "wdc1" any cardio 0x170 0x10 insert echo Microtech XpressDock inserted remove echo Microtech XpressDock removed =========================================================================== LTS ID : 261 Name : Shinji Kitamoto (skitamoto@odp.co.jp) Machine : SHARP MN-5100D (CPU Pentium 133, HDD 1.4GB, RAM 32MB) FreeBSD : OK (2.2.6) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6729/6730 Cards : - 3Com 3C589D - Accton EN2216 =========================================================================== LTS ID : 260 Name : Hiroshi Kawakubo (hiroshi.kawakubo@nifty.ne.jp) Machine : SONY VAIO PCG-505EX (CPU MMX Pentium 233MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Adaptec SlimSCSI APA-1460A =========================================================================== LTS ID : 259 Name : Noriyuki KOIZUMI (fwih8471@mb.infoweb.ne.jp) Machine : Toshiba Libretto 50 (CPU Pentium 75MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (FreeBSD-2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_NOSUSPEND_IMMEDIATE=3, APM_BROKEN_STATCLOCK PCIC : Intel 82365 (or clones) Cards : - 3Com 3C589C - U.S. Robotics XJ5560 - NTT Personal Paldio Data Card DC-1P - Adaptec SlimSCSI APA-1460AJ - Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem) card "Intel" "EtherExpress\\(TM\\) PRO/100 LAN/Modem PC Card Adapter" config 0x1f "sio2" any insert echo Intel EtherExpress PRO/100 LAN/Modem as Modem remove echo Intel EtherExpress PRO/100 LAN/Modem =========================================================================== LTS ID : 258 Name : Hiroaki Goto (gorry@shonan.ne.jp) Machine : TOSHIBA Libretto 50 (CPU Pentium 75MHz, HDD 800MB, RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - ICM PSC-2401 (SCSI card) - corega Ether PCC-T card "corega K.K." "corega Ether PCC-T" config default "ed0" any insert echo corega Ether PCC-T insert /etc/pccard_ether $device remove echo corega Ether PCC-T removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 257 Name : Robert S. Hibi (hibi@med.kurume-u.ac.jp) Machine : Chandler (Frontier Kojiro) (CPU Pentium 120MHz, HDD 800MB, RAM 64MB (+ alpha)) FreeBSD : OK (2.2.5-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82635 (or clones) Cards : - 3Com Etherlink III 3C589D - adaptec SlimSCSI Misc Info : Just a thing necessary for the installation was to imput "flags npx0 0x01" and "quit" in UserConfig CLI mode. -> Thanks Tatsumi. =========================================================================== LTS ID : 256 Name : Motomichi Masuzaki (mzaki@e-mail.ne.jp) Machine : Libretto 70 (CPU Pentium MMX 120MHz, HDD 1.6G, RAM 32M) FreeBSD : needs some tips described below (2.2.5) APM BIOS : OK (1.1) Cards : - Panasonic LK-RM864D - SuperSocket RE-450T - SII MC-6530 - PLANET COMMUNICATIONS ENW-3501-T =========================================================================== LTS ID : 255 Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp) Machine : SONY VAIO PCG-505X (CPU Intel Pentium MMX 166MHz, HDD 2GB, RAM 32MB) FreeBSD : OK (2.2.5R) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - TDK LAK-CD021AX - Adaptec SlimSCSI(APA-1460J) =========================================================================== LTS ID : 254 Name : Ken-ichi Suzuki (ksuzuki@miyagi-ct.ac.jp) Machine : TOSHIBA Libretto 30 (CPU 486DX4(100MHz), HDD 1.6MB, RAM 16MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET Cards : - Relia PCMCIA Ethernet Adapter card "PCMCIA LAN" "Ethernet" config default "ed0" any insert echo Relia PCMCIA LAN inserted insert /etc/pccard_ether $device remove echo Relia PCMCIA LAN removed remove /etc/pccard_ether_remove $device - Megahertz 56k pccard modem CC1560J =========================================================================== LTS ID : 253 Name : Mori Takusi (tak_mori@kh.rim.or.jp) Machine : SOTEC WinBook Bird S3P133 (CPU Pentium 133MHz, HDD 776MB (680MB: FreeBSD, 96MB:DOS), RAM 48MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: Boot PAO flp (version: 971211?) -- I get it 03/97 from http://www.jp.freebsd.org/PAO/ APM BIOS : ? -- After resumption from suspending, CPU speed becomes very slowly. (1.1) Config Opt: none (I used default PAO config) Cards : - KME SCSI PCMCIA (KXLC002) # KME (TAXAN ICD-400PN, etc.) card "KME" "KXLC002" config 0x24 "ncv0" any 0xb4d00000 insert echo KME SCSI PCMCIA Card inserted remove echo KME SCSI PCMCIA Card removed Misc Info : First, from DOS partition, I installed /bin ,/compat* and /src/sys with Boot PAO flp, and compiled & installed PAO kernel, and edit /etc/pccard.conf. Then (after reboot), form CDROM which is connected to PCMCIA SCSI card, I could instrall the rest. =========================================================================== LTS ID : 252 Name : Takafumi Yabunaka (yabunaka@mb.infoweb.ne.jp) Machine : Fujitsu FMV-475NL/S (CPU i486DX 75MHz, HDD 1.3GB / Toshiba MK1301MAV, RAM 24MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.0) PCIC : Cirrus Logic PD-6710 Cards : - 3Com EtherLink III LAN PC Card 3C589D - Megahertz Ethernet LAN Adapter XJ10BT - Telecom Device Super Socket RE450T # Telecom Device SuperSocket RE450T card "Telecom Device K.K." "SuperSocket RE450T" config 0x3 "ed0" any insert echo Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove echo Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device - TDK Data/Fax Modem DF2814B/M - KYOEI DATA/FAX MODEM S-336FM # KYOEI CO., LTD. SHURIKEN FAX MODEM S-336FM card "KYOEI CO., LTD." "S-336FM" config 0x23 "sio2" any reset 1000 insert echo KYOEI SHURIKEN MODEM inserted remove echo KYOEI SHURIKEN MODEM removed - OMRON Data/Fax Modem ME3314C-D # OMRON Data/Fax Modem ME3314C-D card "OMRON" "Modem w DPI ME3314C-D" config 0x23 "sio2" any reset 1000 insert echo OMRON Data/Fax Modem ME3314C-D inserted remove echo OMRON Data/Fax Modem ME3314C-D removed - TDK ISDN Adapter DN1280 # TDK ISDN Adapter DN1280 card "TDK" "DN1280" config 0x22 "sio2" any reset 1000 insert echo TDK ISDN Adapter DN1280 inserted remove echo TDK ISDN Adapter DN1280 removed - NTT DoCoMo Digital Data/Fax 9600 Mark II - NTT DoCoMo Personal Paldio Data Fax Card DC-1S ## NTT Personal Paldio Data Card DC-1S card "NTT Personal" "Paldio Data/Fax Card" "DC-1S" config 0x22 "sio3" 11 0x40000 insert echo NTT Personal Paldio Data Card DC-1S inserted remove echo NTT Personal Paldio Data Card DC-1S removed - NTT DoCoMo Personal Paldio Data Fax Card DC-2N - SII PHS DATA 32S MC-6530 # SII PHS DATA 32S MC-6530 card "SII" "PHS DATA 32S" config 0x23 "sio2" any insert echo SII PHS DATA 32S inserted remove echo SII PHS DATA 32S removed =========================================================================== LTS ID : 251 Name : Ibrahim Korpeoglu (korpe@cs.umd.edu) Machine : Dell Latitude XPi CD (CPU Pentium 150 Mhz, HDD 1.443 GB, RAM 32 MB) FreeBSD : OK (2.2.2) Pccard Pkg: PAO package for 2.2.2 APM BIOS : OK Config Opt: Machine-depend "options" in config file PCIC : TI PCI-1131 CardBus Controller Cards : - 3Com EtherLink-III 3C589D - Lucent WaveLAN PCMCIA Wireless Card Misc Info : - wlp0 can not be started automatically =========================================================================== LTS ID : 250 Name : Koji Mochizuki (k-mochy@tb3.so-net.ne.jp) Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.2GM, RAM 40MB) FreeBSD : OK (2.2.5-Release) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Adaptec SlimSCSI APA-1460 - TDK DF2814B/M - D-Link DE-650 Ethernet Card - Kingston KNE-PCM/x Ethernet =========================================================================== LTS ID : 249 Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu, Tokyo-Rika Daigaku.) (sakai@miya3f01.ee.kagu.sut.ac.jp) Machine : Dell Latitude CP M166ST (CPU MMX-Pentium 166MHz, HDD 4.0GB (1.6G:Win95, 1.3G:FreeBSD (40M:/, 80M:swap, 32M:/var, 1120M:/usr), 570M:reserved for Linux, 510M:/home (for FreeBSD & Linux)), RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_NOSUSPEND_IMMEDIATE=3 PCIC_TI113X_FUNC PCIC : TI PCI1 131 CardBus Cards : - Logitec LPM-LN20T (Ethernet Card) =========================================================================== LTS ID : 248 Name : Hiroshi Tanaka (te194096@cse.ec.kyushu-u.ac.jp) Machine : TOSHIBA DynaBook SS450 (CPU i486SX2 50MHz, HDD 340MB, RAM 8MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-ready FreeBSD Installation Floppy APM BIOS : OK (1.0) PCIC : Intel 82365(or clone) Cards : - D-link DE-660 =========================================================================== LTS ID : 247 Name : HONDA Yasuhiro (honda@kashio.info.mie-u.ac.jp) Machine : Sony VAIO PCG-729 (CPU MMX Pentium 266MHz, HDD 4GB, RAM 64MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: PCIC_TI113X_FUNC PCIC : TI PCIC-1131 PCMCIA/CardBus bridge Cards : - 3Com 3C589D-J-TP =========================================================================== LTS ID : 246 Name : Masataka Okubo (okubo@mbox.kyoto-inet.or.jp) Machine : Toshiba Libretto60CTA (CPU Pentium 100MHz, HDD 777MB (Toshiba MK0803MAT), RAM 16MB) FreeBSD : OK (2.2.5-Release) Pccard Pkg: PAO-2.2.5-Release APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : Intel 82365 Cards : - IBM PCMCIA SCSI Card - AI Brain PCMCIA Type2 Ethernet Adapter (CeLAN EPCMCIA-T PnP) NG-Cards : - SOTEC MU-2000 (SCSI CD-ROM Adapter) - Globalvilalge PowerPort Platinum Pro (For macintosh :-)) =========================================================================== LTS ID : 245 Name : Kouji SATO (skouji@isl.melco.co.jp) Machine : MITSUBISHI Pedion M3041 (CPU MMX Pentium 233MHz, HDD 1GB, RAM 64MB) FreeBSD : FTP install using boot.flp included in 2.2.1R-distribution. (2.2.5R) APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC_TI113X_FUNC PCIC : TI PCI-1131 PCMCIA/CardBus Bridge Cards : - 3Com 3C589B (Ethernet) card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device - TDK DF2814B/M (Modem) card "TDK" "DF2814.*" config 0x22 "sio2" 5 reset 1000 insert echo TDK 28.8K modem inserted remove echo TDK 28.8K modem removed - NTT DoCoMo PCMCIA DATA/FAX Adapter (96P1) card "NTT DoCoMo" "PCMCIA DATA/FAX.*" config 0x22 "sio2" 5 insert echo TDK 28.8K modem inserted remove echo TDK 28.8K modem removed =========================================================================== LTS ID : 244 Name : M. Meiarashi (------) Machine : Toshiba Portege 620CT (US version) (CPU Pentium 100MHz, HDD 2GBytes (TOSHIBA MK2103MAV), RAM 40MBytes) FreeBSD : OK (2.2.5) Pccard Pkg: PAO-19971211 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - NTT DOCOMO DATA/FAX CARD 9600 MarkII - NTT MOBILE DP CARD 2896 P DIGITAL (as modem) - Planet SmartCom CreditCard 2000 - IBM Smart Caputre Card II - AIWA PV-JF288 - Adaptec Slim SCSI Misc Info : On the above mentioned DoPa-enabled card; It worked with "data mode." No test has been made for "packet mode." =========================================================================== LTS ID : 243 Name : Kaoru Imuta (imu@ff.iij4u.or.jp) Machine : SONY vaio PCG-505 (CPU MMX Pentium 133MHz, HDD 1GByte, RAM 60Mbyte) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 or clones Cards : - NTT DoCoMo Mobile Data Card 96P1 config 0x23 "sio2" any =========================================================================== LTS ID : 242 Name : Imai Kiyosi (imai@frei.cs.uec.ac.jp) Machine : Libretto 70CT PA1260C9 (CPU Pentium MMX 120MHz, HDD 1.6G, RAM 32M) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Cards : - ELECOM Laneed LD-CDY =========================================================================== LTS ID : 241 Name : Tetsushi Nakai (-----) Machine : IBM ThinkPad 535E (CPU MMX Pentium 150 MHz, HDD 1.6G, RAM 48M) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: PCVT_SCANSET=2 PCIC : Cirrus Logic PD-6729/6730 Cards : - D-Link 650-T Ethernet - Adaptech SlimSCSI APA-1460A =========================================================================== LTS ID : 240 Name : Ryo MIYAMOTO (rmiya@cc.hirosaki-u.ac.jp) Machine : TOSHIBA Libretto 70 CT (CPU MMX Pentium 120MHz, HDD 1.6GB (1GB for FreeBSD, 500MB for Win95, 30MB for Hibernation ), RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: Default for PAO, such as: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_NOSUSPEND_IMMEDIATE=3, SCSI_LOW, APM_BROKEN_STATCLOCK PCIC : Intel 82365 (or clones) Cards : - MELCO IFC-DC - Logitec LPM-LN20T Misc Info : * Hibernation mechanism works very good by zzz command, power button, and closing LCD panel. * `Logitec LPM-LN20T' works as: pccardd[38]: Card "Logitec"("LPM-LN20T") matched "Logitec" ("LPM-LN20T") ed0: address xx:xx:xx:xx:xx:xx, type NE2000 (16bit) * `MELCO IFC-DC' works as: pccardd[38]: Card "RATOC System Inc."("SCSI2 CARD 37") matched "RATOC System Inc." ("SCSI2 CARD.*") probe ncv attach ncv ncv0: try to reset scsi bus ... =========================================================================== LTS ID : 239 Name : Greg Minshall (minshall@fiberlane.com) Machine : IBM ThinkPad 560x (CPU 233 MHz Pentium, HDD 4GB, RAM 32MB) FreeBSD : Installed fine. (2.2.5.) Pccard Pkg: PAO-971211 APM BIOS : Doesn't "just work". I haven't tried to see what to do to make it work. Cards : - 3COM 3C589. - IBM IDE PC Card (for 20X CDROM) =========================================================================== LTS ID : 238 Name : TAKABA Toshiharu Machine : digital HiNote Ultra II (CTS5120) (CPU Pentium 120MHz, HDD 2 G Bytes, RAM 40 M Bytes) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (APM BIOS version 1.1) PCIC : Cirrus Logic PD672X Cards : - 3Com EtherLink III 3C589C Misc Info : Not work MicroDock PCMCIA-IDE Interface card (MICROTECH INTERNATIONAL, INC.) =========================================================================== LTS ID : 237 Name : Junya Nakata (tarou@cc.tuat.ac.jp) Machine : ThinkPad370C (CPU DX4 75MHz, HDD 540MB (FreeBSD only), RAM 4MB+16MB=20MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, APM_BATT_LOW_SUSPEND, APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 (or clones) (5 mem & 2 I/O windows) Cards : - IBM Creditcard Ethernet II Misc Info : TrackPointII is recongnized as PS/2. And working modeline is following. Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 =========================================================================== LTS ID : 236 Name : Hiroshi Takeuchi (takeuchi@bear.aero.cst.nihon-u.ac.jp) Machine : Toshiba Portege 300CT 1.6 (US Version) (CPU MMX-Pentium 133MHz, HDD 1.6GB, RAM 64MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.2(Recognized as 1.1)) PCIC : ToPIC(Toshiba Propietary) Cards : - Adaptec SlimSCSI APA-1460J - Adaptec SlimSCSI APA-1460A - Accton EN2212 Ethernet - TDK LAK-CD021AX Ethernet - Megahertz XJ3288 FAX/Modem card "Megahertz" "XJ3288-81" config 0x23 "sio1" any insert echo Megahertz XJ3288-J Modem inserted remove echo Megahertz XJ3288-J Modem removed - IBM SmartCaptureCard II Misc Info : Needs to set BIOS PC-Card Mode to PCIC Compatible mode. Resume does NOT work well WITHOUT sound devices(sb0,opl0) config. Toshiba CD-ROM Dock works fine. =========================================================================== LTS ID : 235 Name : Sugimoto Sadahiro (g640678@komaba.ecc.u-tokyo.ac.jp) Machine : SHARP Mebius MN-5500 (CPU MMX Pentium 150MHz, HDD 1.6GB (Win95:800MB, FreeBSD:700MB), RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) APM BIOS : OK (1.1) Config Opt: options "PCIC_TI113X_FUNC" PCIC : TI PCI-1131 CardBus Controller Cards : - RATOC REX-9530 (SCSI-2) irq 7 11 - IO-DATA PCLA/T (Ethernet) Misc Info : I can not use "IRQ 10" for pccard. =========================================================================== LTS ID : 234 Name : Kodama Syuji (kodama@po.cmp-lab.or.jp) Machine : Canon INNOVA 3600 (CPU MMX Pentium, HDD 1.2GB, RAM 320MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : FORCE_APM10 (1.1) Config Opt: device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr device opl0 at isa? port 0x38a PCIC : TI PCI-1130 CardBus Controller =========================================================================== LTS ID : 233 Name : Shuichi NAKAMURA (shuzo@cis.canon.co.jp) Machine : COMPAQ CONTURA AERO 4/33C (CPU i486SX 33MHz, HDD 1.3GB, RAM 20MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211(OK) APM BIOS : OK (1.1) Config Opt: LAPTOP CONTURA COM_IRQ_BUG APM_PCCARD_RESUME PCIC_RESUME_RESET "APM_BATT_LOW_SUSPEND" "APM_NOSUSPEND_IMMEDIATE=3" PCIC : VLSI 82C146 Cards : - 3Com EtherLINK III(3C589B) card "3Com Corporation" "3C589" config　default "ep0" any insert　echo 3Com Etherlink III inserted insert　/etc/pccard_ether $device insert　/sbin/ifconfig $device inet 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 insert　/sbin/route add default 192.168.0.1 remove　echo 3Com Etherlink III removed remove　/sbin/route delete default remove　/sbin/ifconfig $device down remove　/etc/pccard_ether_remove $device Misc Info : In detail, see http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/install.htm http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/reconfig.htm (sorry but, in Japanese) Enjoy! =========================================================================== LTS ID : 232 Name : YOSINAGA, Naritosi (honey@tka.att.ne.jp) Machine : Panasonic Let's note mini AL-N4T512J5 (CPU MMX Pentium 120MHz, HDD 1.6GB, RAM 80MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Ricoh RL5C476 Cards : - D-Link DE-660 Ethernet Card - TDK DF5600 Misc Info : TDK DF5600 hangs by apm -z =========================================================================== LTS ID : 231 Name : Yoshinobu Inoue (-----) Machine : Panasonic Let's Note AL-N4T512J5 (CPU MMX Pentium 120MHz, HDD 1.6GB (1GB:FreeBSD, 400MB:win95, 100MB:hybernation), RAM 16MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: no change from default PCIC : ?? Cards : - 3Com Etherlink III 3C589D - TDK DF5600/J DATA/FAX Modem Misc Info : suspend/resume and hybernation/resume is OK when 3Com PCCARD is set. There is small problem for suspend/hybernation when TDK PCCARD is set. It is that the machine freeze 45 to 50 seconds after suspend/hybernation, but after that it successfully suspend/hybernate. However, if someone resumes, it suddenly begins hybernation again. And next resume will success. But sometimes PCCARD is not recognized at the 2nd resume. If you unset and set it, then it is recognized. And as other information, I tried a BIOS confuguration that power off PCCARD between suspend, and that also seems to be OK. XFree86 worked at VGA resolution with Chipset NeoMagic configuration. Acceralated X also worked at 800x600 and color depth 16. The hardware hot keys, "Fn" + ”F1-F10" also worked under FreeBSD and it can control display, speaker, low electricity mode, hybernation, battery left, etc. =========================================================================== LTS ID : 230 Name : Kayoko, Okamoto (okamoto@mach.kokusaidenki.co.jp) Machine : ThinkPad 560 (CPU Pentium-100MHz, HDD 2.1G(Windows95 500MB, FreeBSD 1600MB), RAM 24MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.2) PCIC : Cirrus Logic PD6729 Cards : - TDK Ethernet LAC-CD021AX - Adaptec SlimSCSI APA-1460J - TDK DF3314E - Sicon Peripheral PCMCIA ATA/ATAPI Adapter card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter" config default "wdc1" any insert echo Sicon Peripherals inserted remove echo Sicon Peripherals removed =========================================================================== LTS ID : 229 Name : Shun-ichi Kobayashi (koba@nakisuna1.kuciv.kyoto-u.ac.jp) Machine : NEC mobio NX MB12C (CPU MMX Pentium 120 MHz, HDD 1.6GB / IBM DDLA-21620, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6710 Cards : - Buffalo IFC-DC2 (SCSI2) aic0 (Adaptec APA-1460) =========================================================================== LTS ID : 228 Name : Mark Andres (mark@giganet.net) Machine : IBM Thinkpad 220 (CPU i386SL 16Mhz, HDD 1.4GB, RAM 10MB) FreeBSD : OK (3.0-current) APM BIOS : OK (?) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - 3Com Etherlink 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 link0 -link1 insert /sbin/route add default 10.0.0.1 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete NG-Cards : Megahertz XJ1144 Misc Info : I have X running, but very slowly. See my homepage for my TP220 at http://www2.giganet.net/~mark/FreeBSD/tp220.html =========================================================================== LTS ID : 227 Name : Yoshisuke Kato (kato@msa.co.jp) Machine : SHARP Mebius MN-5500 (CPU MMX Pentium-150MHz(OverClock 200MHz), HDD 1.6GB, RAM 64MB) FreeBSD : OK (2.2.5-RELEASE + PAO-971211) APM BIOS : OK (1.1) PCIC : TI PCI1131 Cards : - Megahertz XJ10BT - IO-DATA PC-INS128 (ThunderCard DD1280 Firmware ver1.5) # NTT-IT ThunderCard card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128" config 0x22 "sio2" any 0x80 reset 1000 insert echo Thunder-card inserted remove echo Thunder-card removed - REX 5535 SCSI - TDK DF1414 MODEM =========================================================================== LTS ID : 226 Name : ABE Masayuki (pzr@kw.netlaputa.ne.jp) Machine : HITACHI FLORA-NL1 (CPU Pentium(100MHz), HDD 1GB(TOSHIBA MK1004MAT), RAM 40MB(HAGIWARA SYS-COM HSC-HA3032K)) FreeBSD : tips: can't use IRQ 10 with slot 0, 1 (FreeBSD-2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : ctlr(0) TI PCI-1130 [i82365 compatible mode], ctlr(1) Intel 82365 (or clones) Cards : - IBM Double Jack Modem(Data 28.8/Fax14.4) - IBM SCC II (with xscc-0.21) - PCI ENW-3500 - 3Com 3c589B - INTEGRAL PERIPHERALS Viper 340 =========================================================================== LTS ID : 225 Name : Hidetoshi Yanai (yanai@trcj.kao.co.jp) Machine : Panasonic Let'sNote AL-N2 (CPU MMX Pentium 150MHz, HDD 1.6GB (800MB:FreeBSD, 800MB:win95), RAM 64MB) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) Cards : - 3Com Etherlink III 3C589D - adaptec SlimSCSI CE =========================================================================== LTS ID : 224 Name : Kato Daisuke (katodai@taka.ee.titech.ac.jp) Machine : SOTEC Winbook SC (CPU 486SX 33MHz, HDD 240MB, RAM 8MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971206 APM BIOS : OK (1.0) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_NOSUSPEND_IMMEDIATE=3 PCIC : Cirrus Logic PD672X Cards : - MELCO LPC-T =========================================================================== LTS ID : 223 Name : NABETANI Masaki (pxp14205@niftyserve.or.jp) Machine : TOSHIBA TECRA720CDT/2.1 (CPU Pentium 133MHz, HDD 2.0GB(1.0GB for FreeBSD), RAM 48MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971206 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - IBM SCSI PCMCIA Card =========================================================================== LTS ID : 222 Name : Tatsumi Hosokawa (hosokawa@jp.FreeBSD.org) Machine : Libretto 50CT US version (CPU Pentium 75MHz, HDD 1.6GB / IBM DDLA-21620, RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971201 APM BIOS : OK (1.1) PCIC : 82365 compatible Cards : - Megahertz XJ-10BT - Planet SmartCOM 3500 - Telecom Device SuperSocket RE450T - IBM Creditcard Ethernet II - Motorola Marine multifunction card (as modem) - NTT-IT ThunderCard AVF288 - Adaptec SlimSCSI APA-1460 - Epson Flash Packer 10MB - Integral Peripherals VIPER 340 - GREYSTONE DiskDock - I/O DATA CDP-TX6 - I/O DATA CDP-TX10 - Panasonic LK-RM120 NG-Cards : - Pioneer PCP-PW1W Misc Info : You have to keep last 34 megabytes of the drive as "unused" fdisk area to use as hybernation area. You'll see the incredible tragedy without it when you suspend the system :-). =========================================================================== LTS ID : 221 Name : Koichi Koibuchi (buchi@sum.elec.keio.ac.jp) Machine : Toshiba Libretto50 CT (US) (CPU Pentium 75MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2.2-R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 (or clones) Cards : - 3Com Etherlink III 3C589C - Adaptec SlimSCSI APA-1460A - NTT DoCoMo PCMCIA DATA/FAX Adapter MarkII - TDK DF5600/J DATA/FAX Modem =========================================================================== LTS ID : 220 Name : Koichi Koibuchi (buchi@sum.elec.keio.ac.jp) Machine : AKIA Tornado 513V (CPU Pentium 133MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.2.2-R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH APM_BATT_LOW_SUSPEND APM_NOSUSPEND_IMMEDIATE=3 PCIC : Cirrus Logic PD6729 Cards : - 3Com Etherlink III 3C589C - Adaptec SlimSCSI APA-1460A - NTT DoCoMo PCMCIA DATA/FAX Adapter MarkII - TDK DF5600/J DATA/FAX Modem Misc Info : zzz fails when TDK DF5600/J is plugged in. =========================================================================== LTS ID : 219 Name : Hirokazu Fujioka (h-fujioka@m2.people.or.jp) Machine : NEC PC-9801NS/A (CPU i486SX 33MHz(ODP i486DX4 100MHz), HDD 500M, RAM 14336K bytes) FreeBSD : OK (FreeBSD(98)2.2.1R) Pccard Pkg: PAO-970331+PAO-970331-pc98-970721 APM BIOS : OK (APM BIOS version 1.3(NEC)) PCIC : PC-Card PC98 Original Cards : - -TDK DF1414EX DATA/FAX MODEM #For NEC PC9801NS/A # Generally available IO ports io 0x240-0x2e0 # Generally available IRQs irq 5 # Available memory slots memory 0xda000 96k # Modem Cards # TDK 14.4K modem series card "TDK" "DF1414.*" config 0x30 "sio1" any reset 1000 insert echo TDK 14.4K modem inserted remove echo TDK 14.4K modem removed - -Motorola MONTANA V.34 FAX/MODEM # MOTOROLA 28.8K modem card "Motorola" "MONTANA*" config 0x23 "sio1" any reset 1000 insert echo Motorola 28.8K modem inserted remove echo Motorola 28.8k modem removed =========================================================================== LTS ID : 218 Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp) Machine : Toshiba DynaBook SS475 (CPU Intel 486DX75, HDD 500MBytes, RAM 32M) FreeBSD : OK (2.2.5R) Pccard Pkg: PAO-9706016 APM BIOS : OK (1.0) PCIC : Intel 82365 Cards : - Adaptec Slim SCSI - TDK LAK-CD021 =========================================================================== LTS ID : 217 Name : Hideki Sakamoto (sakamoto@hlla.is.tsukuba.ac.jp) Machine : DEC digital HiNote Ultra II (CPU P5-120, HDD 2GB, RAM 40MB) FreeBSD : OK (2.2.1-R) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD672X Cards : - Adaptec SlimSCSI APA-1460J - APEX Data MultiCard (as Modem) - TDK LAK-CD021AX - PCM250AM (2.5" HDD case and PCMCIA card) # PCM250AM 2.5in HDD adapter card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter" config 0xd "wdc1" any insert echo PCM250AM inserted remove echo PCM250AM removed Misc Info : PCM250AM don't work with irq=15. =========================================================================== LTS ID : 216 Name : Hadime Watanabe (h_nabe@kt.rim.or.jp, h_nabe@mars.hby.toshiba.co.jp) Machine : Toshiba DynaBook TECRA 510CT (CPU Pentium 133MHz, HDD 2.1GB(Win95:0.8GB, FreeBSD:1.3GB), RAM 48MB(16+32)) FreeBSD : OK (2.2.2-Release) APM BIOS : OK(Maybe) (1.1) Config Opt: LAPTOP PCIC : Intel 82365 (or clones) Cards : - Toshiba Joho System PTJ-LAN/T # TJ Ethernet card (NE2000 clone?) card "TJ" "Ethernet" config default "ed0" any 0x10 insert echo TJ Ethernet card inserted insert /etc/pccard_ether $device insert /sbin/ifconfig $device inet XXX.XXX.XXX.XXX netmask 255.255.255.0 insert /sbin/route add default YYY.YYY.YYY.YYY remove echo TJ Ethernet card removed remove /sbin/ifconfig $device down remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 215 Name : Regis Rampnoux (regisr@pobox.com) Machine : Texas Instruments / Extensa 560 CD (CPU Pentium 75MHz, HDD 1.2 Go, RAM 40MB) FreeBSD : OK (2.2.2) Pccard Pkg: 970616 release APM BIOS : Working (1.1) Cards : - 3C589C Etherlink III - Adaptec APA 1460A SCSI Working with HP DAT. Not working with iomega devices (ZIP/JAZ) Misc Info : XFree86 3.3.1 /etc/pccard_ether modified to add alias address. =========================================================================== LTS ID : 214 Name : TOMOyuki sasaki (tsasaki@onbiz.net) Machine : Panasonic Let's Note AL-N2 T516J5 (CPU Pentium MMX 166MHz, HDD 2GB, RAM 96MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - NTT Personal Paldio DataFAX Card card "NTT Personal" "Paldio DataFAX Card" config 0x13 "sio3" any insert echo NTT Personal Paldio DataFax Card inserted remove echo NTT Personal Paldio DataFax Card removed - 3Com Corporation 3C589D =========================================================================== LTS ID : 213 Name : George V. Neville-Neil (gnn@wrs.com) Machine : Toshiba Satellite Pro 440CDX (CPU Pentium 133, HDD 2 Gig, RAM 32 Meg) FreeBSD : Up and running (2.2.2) APM BIOS : Yes (1.1) PCIC : PC-Card Intel 82365 Cards : - 3Com Etherlink III 3C589C config 0x1 "ep0" 11 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 -link0 link1 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete - Megahertz XJ4336-CC4336 card "Megahertz" "XJ4336-CC4336" config 0x23 "sio2" 10 insert echo Megahertz XJ4336 inserted remove echo Megahertz XJ4336 removed =========================================================================== LTS ID : 212 Name : Kazumasa Satoh (kaz3141@aol.com) Machine : Gateway 2000 Solo 9100 JP 166LS (CPU Pentium P55CLM (MMX) 166 MHz, HDD 3 GB Enhanced IDE (IBM-DLGA-23080), RAM 64 MB SDRAM) FreeBSD : OK (FreeBSD 2.2.2-Release) Pccard Pkg: PAO-970616 APM BIOS : Gateway BIOS(updated) is OK (APM BIOS Version 1.2) PCIC : Cirrus Logic PD6832 CardBus Controller Cards : - Adaptec SlimSCSI APA-1460A/J97 KIT Rev. A - NextCom Next Hawk Ethernet Adapter # NextCom Next Hawk Etherneet Adapter card "NextCom K.K." "Next Hawk" config default "ed0" any insert echo NextCom Next Hawk Ethernet Adapter inserted insert /etc/pccard_ether $device remove echo NextCom Next Hawk Ethernet Adapter removed remove /etc/pccard_ether_remove $device Misc Info : Uncomment following options in the "PAO" configuration file options APM_BATT_LOW_SUSPEND Add following options options MFS Add following controller and devices # YAMAHA OPL3-SAx sound LSI system controller snd0 device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 =========================================================================== LTS ID : 211 Name : Yoshinori Watanabe (nabe@s-input.co.jp) Machine : OHTEC IDATEN FNP590D (CPU Pentium 90, HDD 540M, RAM 8M) FreeBSD : OK (2.2.2-Release) APM BIOS : NG (1.1) PCIC : Cirrus Logic PD672X Cards : - BUFFALLO LPC-T =========================================================================== LTS ID : 210 Name : Komori Nozomu (nozo@ke.ics.saitama-u.ac.jp) Machine : Toshiba Libretto50 (CPU Intel Pentium-75MHz, HDD 810MB, RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - TDK LAK-CD021BX card "TDK" "LAC-CD02x" config default "fe0" any ether 0x92 00:80:98 # for CD021, CD021A, CD021AX ether 0x96 00:80:98 # for CD021BX insert echo TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove echo TDK LAC-CD021 removed remove /etc/pccard_ether_remove $device - Telecom Device SuperSocket RE450T card "Telecom Device" "SuperSocket RE450T" config default "ed0" any 0x10 insert echo NE2000 compatible card inserted insert /etc/pccard_ether $device remove echo NE2000 compatible card removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 209 Name : Toshimitsu Miyake (miyake@nalgo.co.jp) Machine : Toshiba Libretto 60 (CPU Pentium 100MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 (or cones) Cards : - 3Com 3C589C Misc Info : shutdown -r now, then boot Windows 95; hang. shutdown -r now, then boot FreeBSD; OK. =========================================================================== LTS ID : 208 Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp) Machine : PC-9821Ld (CPU i486SX-33MHz, HDD 1245MB, RAM 11.6MB) FreeBSD : OK (FreeBSD(98)2.2.2-RELEASE) Pccard Pkg: PAO-970616 + PAO-970616-pc98-971023 APM BIOS : OK (1.4) PCIC : Cirrus Logic PD672X Cards : - RATOC REX-R280 card "RATOC System Inc\\." "10BASE_T CARD R280" config 0x3a "fe0" any ether 0x1fc 00:c0:d0 insert echo RATOC REX-R280 10BASE-T LAN card inserted insert /etc/pccard_ether $device remove echo RATOC REX-R280 10BASE-T LAN card removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 207 Name : Tsuyoshi SUMIDA (sumida@capricorn10.cse.kyutech.ac.jp) Machine : Sharp Mebius MN-5400D (CPU Pentium-133MHz, HDD 1.6GB(Win95: 900M, FreeBSD: 600M), RAM 32MB) FreeBSD : OK (2.2.2-Release) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : TI PCI-1131 CardBus Controller Cards : - TDK CD021BX (Ethernet) # TDK LAC-CD021, LAC-CD021A card "TDK" "LAC-CD02x" config default "fe0" any #ether 0x94 00:80:98 ether 0x96 00:80:98 insert echo TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove echo TDK LAC-CD021 removed remove /etc/pccard_ether_remove $device - 3Com 3C589C (Ethernet) =========================================================================== LTS ID : 206 Name : Ken'ichi Uenami (uenami@imasy.or.jp) Machine : Toshiba Portege 300CT 1.6 (CPU MMX-Pentium 133MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2-stable) APM BIOS : OK (1.2(recognized as 1.1)) PCIC : ToPIC(Toshiba Propietary) Cards : - D-Link DE650T =========================================================================== LTS ID : 205 Name : Shuichi Oono (shu-oono@mbox.kyoto-inet.or.jp) Machine : IBM ThinkPad 535E (CPU Pentium MMX 150MHz with 256KB cache, HDD 1.6GB ( 650MB for DOS, 950MB for FreeBSD ), RAM 72MB) FreeBSD : OK (2.2.1-RELEASE PAO) APM BIOS : OK, But have a little problem (Hangup after shutdown XF86-3.2, if I suspended during X session is act.) (APM 1.1) Config Opt: no machine dependent parameters PCIC : Cirrius Logic PD6729 PC-Card Controller Cards : - RATOC REX9530 for SCSI2 - 3Com EtherLink-3 3C589D for Ethernet - TDK DF5600 (K56flex) for Modem Misc Info : I don't have a confirmation what TDK DF5600 is working with K56flex. But, dial-up ppp(iijppp with NAT patch) is working fine. =========================================================================== LTS ID : 204 Name : Takehiro TOMINAGA (tominaga@kurasc.kyoto-u.ac.jp) Machine : NEC PC-9821Ne3 (Windows model) (CPU i486DX2 50MHz, HDD 340MByte (use only 100MByte for FreeBSD), RAM 7.6MByte) FreeBSD : OK (2.2.1R) Pccard Pkg: PAO-970331 APM BIOS : NG (kernel panic will happen when it enables apm bios) (1.11) PCIC : Cirrus Logic PD-672X (i don't know exactly, but pccardd says so in boot time message ;-) Cards : - Melco IFS-DS (SCSI card, OEM of RATOC REX 5536) =========================================================================== LTS ID : 203 Name : Douglas Carmichael (dcarmich@mcs.com) Machine : NEC Versa 6050MH (CPU Pentium/150 MMX, HDD 1.44GB IDE, RAM Real memory=50331648 (49152K bytes), Avail memory=46522368 (45432K bytes)) FreeBSD : OK (2.2.2-RELEASE, PAO-970616) Pccard Pkg: (not using pccard-test) APM BIOS : OK (1.1) Config Opt: Sound and serial options in MISC section PCIC : TI PCI-1130 CardBus controller Misc Info : Here are the options I used for sound on my machine: controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr options SBC_IRQ=5 device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 device pca0 at isa? port IO_TIMER1 tty And the serial options (this is for the default settings of the rev 42 BIOS): device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 9 vector siointr =========================================================================== LTS ID : 202 Name : Gabor Kincses (gabor@acm.org) Machine : IBM Thinkpad 755 CX (CPU Pentium 75 Mhz, HDD 810 MB (Win95 465 MB, FreeBSD 345 MB), RAM 24 MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (apm0 panics when booting from DOS for 800x600) (1.1) PCIC : Intel 82365 (or clones) Misc Info : i386/isa/syscons.h (COL=100, ROW=37) =========================================================================== LTS ID : 201 Name : Kiyoshi Utsui (utsui@mud.biglobe.ne.jp) Machine : Libretto50 (CPU Pentium-75, HDD 810MB, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_BROKEN_STATCLOCK, APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 Cards : - MELCO LPC-TS - MELCO IFC-DC - TDK LAK-CD021AX - MELCO CDN-D8C =========================================================================== LTS ID : 200 Name : Hideaki Okada (hokada@isl.melco.co.jp) Machine : AMiTY CN (CPU Pentium 133MHz, HDD 1166MB, RAM 32MB) FreeBSD : PCIC(PAO) driver recognizes TI1131 CardBus controller as VLSI 82C146, so only slot0(bottom one) can be used. IRQs other than 11 cannot be routed from PC Card, so you need to select IRQ 11 for PC Card in the early stage of the installation process and modify pccard.conf to use IRQ 11 only after pccard support is enabled. 2.2.2R(PAO-970616) seems not be able to read CIS, he says name of found card is (null)(null). (2.2.1R) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) PCIC : TI 1131 CardBus Controller Cards : - 3Com EtherLink III 3C589B - TDK DF2814 - EPSON FLASH PACKER 85MB - INTEGRAL VIPER 170 =========================================================================== LTS ID : 199 Name : Kikuti hideo (kikuchi_hi@akw05.khi.co.jp or pxc00264@niftyserve.or.jp) Machine : NEC PC9801 NL/R 120A (CPU 486SX(J)16MHz, HDD IBM DTLA21620 1.6GB, RAM 11.6MB) FreeBSD : OK (FreeBSD(98)2.2.1R-RELEASE) Pccard Pkg: PAO-970331-pc98-970721 APM BIOS : OK (apm: found APM BIOS version 1.2) PCIC : PC-Card PC98 Original Cards : - TDK DF2814BX IRQ 5 6 memory 0xda000 96k NG-Cards : RATOK REX9836A =========================================================================== LTS ID : 198 Name : Takayuki Hatano (tk-hatano@ntis.nec.co.jp) Machine : ibm ThinkPad 560 (CPU p5 120MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.2.1) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6729 Cards : - D-LINK DE-650 ethernet card Misc Info : NG-CARD infomation 1. SCSI-CARD MIDORI ELECTRONICS CN-SC43 probe ncv ncv0:no ioaddr is given Return IRQ=5 driver not allocation failed for MIDORI ELECTRONICS.* (Device not configured) used CD-ROM CARAVELLE CD-880 2. modem-CARD Megahertz XJ4336J many time not probed such a message as No card in database for ""("") But sometime probed such a message as sio2: type 16550A Card "Megahertz"("XJ4336J") matched "Megahertz"("XJ*") and I can used ppp command /etc/pccard.conf card "Megahertz" "XJ" config 0x23 "sio2" any insert echo Megahertz PCMCIA Modem insert remove echo Megahertz PCMCIA Modem remove =========================================================================== LTS ID : 197 Name : NAKAIWA Toshihiro (nakaiwa@sainet.or.jp) Machine : IBM ThinkPad 535 (KF8) (CPU Pentium 120Mhz, HDD 2.1GB, RAM 40MB) FreeBSD : OK (2.2.2R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP,TP535 PCIC : Cirrus Logic PD6729 Cards : - NTT-TE tokyo MN128 TACard PC2 - TDK LAK-CD021AX - adaptec SlimSCSI APA-1460J - NextCom Net Dolphin NCM1428JA =========================================================================== LTS ID : 196 Name : Hiroki Suguri (suguri@comtec.co.jp) Machine : Panasonic Let's note AL-N2T515J5 (CPU MMX Pentium (P55CLM) 150MHz, HDD 1.6GB, RAM 96MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH "APM_BATT_LOW_SUSPEND" "APM_NOSUSPEND_IMMEDIATE=3" "MAXMEM=(96*1024)" PCIC : Ricoh RL5C476 (PCI) Cards : - TDK DF3314E - Panasonic TO-CAF336 - 3Com Etherlink III 3C589D - Adaptec SlimSCSI APA-1460 NG-Cards : - KME KXLC003 Misc Info : KME KXLC003 (Untested card inserted. please e-mail the result to hosokawa@jp.FreeBSD.org) pccardd[36]: Card "KME "("KXLC003") matched "KME" ("KXLC003") pccardd[36]: driver allocation failed for KME (Device not configured) pccardc and pccardd PAO-970616/usr.sbin/pccard/{pccardc,pccardd} not installed by PAO boot.flp. /stand/{pccardc,pccardd} were linked to /usr/sbin instead. Is it intentional? See /stand/PAO/bin/bininstall.sh =========================================================================== LTS ID : 195 Name : Kazunori Ueno (jagarl@creator.club.or.jp) Machine : PC-9821 Ls150 S14/D2 (CPU Pentium MMX 150MHz, HDD 1.4Gbytes (FreeBSD : 100Mbytes), RAM 32Mbytes) FreeBSD : OK (2.2.1R) Pccard Pkg: PAO-970331[1] + PAO-970331-pc98-970512[2] APM BIOS : OK (1.12) PCIC : Cirrus Logic PD672X Cards : - D-Link DE-660 Ethernet Card # D-Link DE-660 Ethernet Card card "D-Link" "DE-660" config default "ed0" any 0x10 insert echo D-link DE-660 inserted insert /etc/pccard_ether $device remove echo D-link DE-660 removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 194 Name : Shoichi Kitagawa (sk@kiu.ac.jp) Machine : Latitude XPi P133ST (English keyboard) (CPU Pentium-133MHz, HDD 1.2GB(7MB:FAT,494MB:Lunux,630MB:FreeBSD,27MB:Swap for Linux & FreeBSD), RAM 40MB) FreeBSD : OK (2.2-970422-RELENG) Pccard Pkg: 970331 APM BIOS : OK except zzz (1.1) Config Opt: KBD_MAXRETRY=5 KBD_MAXWAIT=8 KBD_RESETDELAY=500 PCIC : Vadem 468 Cards : - IO-DATA PCFCA-10M - 3Com 3C589B - 3Com 3C589C - Logitec LPM-LN20T card "Logitec" "LPM-LN20T" config default "ed0" any insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device - Megahertz XJ3288J - Megahertz XJ2144 - TDK DF2814B/M - Adaptec APA-1460J - TAXAN ICD-400PN - IO-DATA PCINS-128 (ISDN) - BUG Linkboy D64K =========================================================================== LTS ID : 193 Name : KANETA Shin'ichi (kaneta@rsirc.cr.chiba-u.ac.jp) Machine : ThinkPad 535 (2606-MF9) (CPU Pentium (133MHz), HDD 1033MB (Windows95 200MB, FreeBSD residual), RAM 40(8+32)MB) FreeBSD : OK (2.2.2) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_IDLE_CPU APM_PCCARD_RESUME PCIC_RESUME_RESET APM_BATT_LOW_SUSPEND APM_NOSUSPEND_IMMEDIATE=3 PCIC : Cirrus Logic PD6729/6730 Cards : - Allied Telesis,K.K Ethernet LAN Card CentreCOM LA-PCM io 0x200-0x230 irq 10 11 card "Allied Telesis,K\\.K" "Ethernet LAN Card" config 0x1 "ed0" any 0x10 ether 0xff0 00:00:f4 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device Misc Info : zzz(8) fails "Entire system suspend failure: errcode = 96". But the kernel includes fdc driver works out well. =========================================================================== LTS ID : 192 Name : kazuhisa nakajima (nakasun@fatk.yamatake.co.jp) Machine : PC-9821 Ls150 Aile (CPU Intel MMX Pentium 150MHz, HDD 1.4GB(W95:840MB,DOS:50MB,FreeBSD:500MB), RAM 32MB) FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE) Pccard Pkg: peo98enc.flp APM BIOS : OK (1.12) PCIC : Cirrus Logic PD672X Cards : - Melco LPC-T =========================================================================== LTS ID : 191 Name : Ichiro Sako (sako@law.kyushu-u.ac.jp) Machine : PC9821La10 (CPU Pentium-100MHz, HDD 810M, RAM 16MB) FreeBSD : OK (FreeBSD(98)2.2.1R-Alpha) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970721 APM BIOS : OK (1.11) Config Opt: PC98 PCIC : Cirrus Logic PD672X Cards : - Melco LPC-TS - TDK DF3314ES =========================================================================== LTS ID : 190 Name : Fujioka Hirokazu (87519296@people.or.jp) Machine : NEC PC9801NS/A (CPU DX4-100MHz, HDD 540MB, RAM 9.6MB) FreeBSD : OK (FreeBSD(98)2.2.1 ALPHA) Pccard Pkg: PAO-970331+PAO-970331-pc98-970721 APM BIOS : OK (1.3) PCIC : PC-Card PC98 Original Cards : - TDK DF1414EX(sio) io 0x240-0x2e0 irq 5 memory 0xda000 96k # TDK 14.4K modem series card "TDK" "DF1414.*" config 0x30 "sio1" any reset 1000 insert echo TDK 14.4K modem inserted remove echo TDK 14.4K modem removed =========================================================================== LTS ID : 189 Name : Takuro Tokuyama (tokuyama@nsc.mci.mei.co.jp) Machine : Toshiba Libretto 30 (CPU Am5x86 100MHz, HDD 500MB, RAM 20MB) FreeBSD : OK (2.2.2R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Cards : - NTT-TE TOKYO MN128 TA CARD PC1 (ISDN) =========================================================================== LTS ID : 188 Name : Hiroyuki Ohtsuki (ohtsuki@mic.atr.co.jp) Machine : Toshiba Libretto 50CT (CPU Pentium (74.98-MHz 586-class CPU), HDD 810MB (300MB for FreeBSD), RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET WAVELAN_PCMCIA_24 PCIC : PC-Card Intel 82365 (or clones) Cards : - AT&T WaveLAN/PCMCIA - MATSHITA KME CD-ROM02 1.13 - GATEWAY2000("XJ1144") Misc Info : I used "setconf.exe" and "instconf.exe" on DOS to initialize WaveLAN card. wlp0 cannot be automatically started. ifconfig wlp0 up dhcpc wlp0 are needed manually. =========================================================================== LTS ID : 187 Name : SASAKI Takesi (takesi@is.titech.ac.jp) Machine : Fujitsu FMV5100NC-S (CPU Pentium, HDD 777MB, RAM 48MB) FreeBSD : OK (2.2.2R) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Cards : - ELAN Ethenet card =========================================================================== LTS ID : 186 Name : Takeshi Shibagaki (ie9t-sbgk@asahi-net.or.jp) Machine : Sharp Mebius MN-7350 (CPU Intel Pentium 150MHz, HDD 2067MB, RAM 64MB) FreeBSD : NG(BootAsia PAO for 2.2.1),reboot in PCMCIA initialize. OK(Walnut Creek 2.2.1 boot.flp in English) (FreeBSD2.2.1-RELEASE(kernel 2.2.2)) Pccard Pkg: PAO-97616+[bsd-nomads:04710]patch+etc APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH PCIC_PCI_ISA_CONFLICT, PCIC_MAX_SLOTS=2, PCIC_NOCLRREGS APM_NOSUSPEND_IMMEDIATE=3, PCIC_IRQ=7, COM_MULTIPORT, APM_BROKEN_STATCLOCK PCIC : Cirrus Logic PD6832 Cards : - NTT Personal Paldio Data Card DC-1S # NTT Personal 32kbps Data Card DC-1S card "NTT Personal" "Paldio Data Card" config 0x23 "sio2" pio insert echo NTT Personal 32kbps Data Card DC-1S inserted remove echo NTT Personal 32kbps Data Card DC-1S removed - Megahertz XJ3288A-J (33.6kbps upgrade) # Megahertz XJ3288A-J (33.6 upgraded) card "Megahertz" "XJ3288-81" config 0x23 "sio2" any insert echo Megahertz modem inserted remove echo Megahertz modem removed =========================================================================== LTS ID : 185 Name : Hasegawa, Tomoki (VYA04605@niftyserve.or.jp) Machine : Toshiba DynaBookSS433 (CPU i486SX 33MHz, HDD 2.1GB(MK2103MAV), RAM 20MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (1.0) PCIC : Intel 82365SL(or compatible) Cards : - NOTEWORTHY NW288CR - TAXAN ICD-400PN (KME KXLC002) - NTT Personal Paldio Data Card DC-1P - DATAFAB PCMMD2 =========================================================================== LTS ID : 184 Name : Atsushi Yanoma (CZL02453@niftyserve.or.jp) Machine : IBM Think Pad 535 MF-9 (CPU Intel Pentium 133MHz, HDD 1.0GB, RAM 40MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: TP535 PCIC : Cirrus Logic PD9629 Cards : - Media Intelligent SCSI-2 PC Card MSC-200 card "EPSON" "SCSI-2 PC Card SC200" config 0x12 "ncv0" any insert echo EPSON SCSI-2 PC Card MSC200 inserted remove echo EPSON SCSI-2 PC Card MSC200 removed =========================================================================== LTS ID : 183 Name : Masaki KONUMA (konuma@de.mtex.co.jp) Machine : NEC PC-9821Ld/350A (CPU Intel i486SX 33MHz, HDD 335MB, RAM 35.6MB) FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505 APM BIOS : NG (1.4) PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III 3C589C io 0x0d0-0x100 irq 10 =========================================================================== LTS ID : 182 Name : Peter Dufault (dufault@hda.com) Machine : IBM Thinkpad 365X (CPU Pentium 120Mhz, HDD 755MB (IBM 810MB), RAM 8MB (+16MB added)) FreeBSD : FreeBSD installed OK (2.2.1 from April '97 WC CDROM) Pccard Pkg: Version on 2.2.1 WC CDROM APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - 3COM 3c589D Misc Info : 3c589D needs "-link0 link1" in ifconfig in addition to setup with floppy. The 365X keyboard works with syscons without enabling XT scancodes. =========================================================================== LTS ID : 181 Name : Chiharu Shibata (chi@rd.njk.co.jp) Machine : ThinkPad 560-EJA (CPU Pentium-120MHz, HDD 810MB(Win95: 400M, FreeBSD: 410M), RAM 24MB) FreeBSD : OK (2.2.1-Release) Pccard Pkg: 970425 APM BIOS : OK (1.25) Config Opt: LAPTOP PCIC : Cirrus Logic PD6729 Cards : - Melco LPC-TS - Megahertz XJ3288-JP - SONY CD-ROM Discman PRD-650 =========================================================================== LTS ID : 180 Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp) Machine : PC-9821La10 (CPU Intel Pentium 100MHz, HDD 1620MB, RAM 40MB) FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512 APM BIOS : OK (1.11) PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III 3C589C - RATOC REX-9835Z - RATOC REX-9836A - RATOC REX-9530 =========================================================================== LTS ID : 179 Name : Terry R. Friedrichsen (terry@venus.sunquest.com) Machine : Fujitsu Milan FPC05002A (CPU Pentium (120 MHz), HDD 1.2 GB, RAM 16 MB) FreeBSD : The only real problem is that the FreeBSD kernel will not talk to the video display properly (Chips & Technologies CT65548). I used a serial console to get the PAO kernel built and running. The video was still scrambled until I enabled "device vt0" and "options PCVT_FREEBSD" in the kernel config. (FreeBSD 2.2.1-RELEASE) APM BIOS : OK except zzz (apm -z) gives "Invalid argument" (APM BIOS version 1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD6729 rev 254 (5 mem and 2 I/O windows) Cards : - 3Com 3C589C # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device insert /sbin/ifconfig $device inet "inet-address" netmask 255.255.255.0 broadcast "broadcast address" insert /sbin/route add default "default-gateway" remove echo 3Com Etherlink III removed remove /sbin/ifconfig $device down remove /etc/pccard_ether_remove $device - Adaptec SlimSCSI # Adaptec SlimSCSI card "Adaptec, Inc\\." "APA-1460.*" config default "aic0" 11 insert echo Adaptec Slim SCSI inserted remove echo Adaptec Slim SCSI removed Misc Info : When installing X, configuring the Glidepoint touch pad as a Glidepoint failed; configuring as a PS/2-style mouse worked. Working modeline: Modeline "800x600@8bpp" 35.87 800 840 968 1056 600 601 605 618 =========================================================================== LTS ID : 178 Name : Jun YAMASHITA (junkun@esys.tsukuba.ac.jp) Machine : TOSHIBA DynaBook Portage 620CT (CPU Intel Pentium Processor 100Mhz, HDD default 1.3GB,but I use 700MB for FreeBSD,and rests are for Windows95, RAM default 8MB + extensional 16MB) FreeBSD : OK (FreeBSD-2.2.1R) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - SII (Data Comminication Card MC-6500) - I-O DATA(PCLA) =========================================================================== LTS ID : 177 Name : Hosobuchi Noriyuki (hoso@buchi.tama.or.jp) Machine : PC-98001NS/A (CPU i486DX2 50MHz, HDD 120MB, RAM 17.6MB) FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512 APM BIOS : OK (1.3) PCIC : PC98-Original Cards : - Contec C-NET(PC)C - Melco LPC-T - PLANET ENW3500 - 3Com 3C589C NG-Cards : - IO-DATA PCFM-144 - Megahertz XJ2144-71 =========================================================================== LTS ID : 175 Name : Yutaka Kudoh (ykudoh@nite.go.jp) Machine : Fujitsu FMV-5100NL/Y (CPU Pentium 100MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970604 APM BIOS : OK (1.1) Config Opt: PCIC_IRQ=15 PCIC : Cirrus Logic PD-6729 Cards : - Panasonic CF-VEL211P-B - Adaptec SlimSCSI APA-1460 =========================================================================== LTS ID : 174 Name : Keisuke TAKAYAMA (taka@magic.omiya.saitama.jp) Machine : Sotec WinBookBird 100 (S3P100) (CPU Pentium 100MHz, HDD 810MB, RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : NG? (1.1) PCIC : PC-Card Intel 82365 (or clones) (5 mem & 2 I/O windows) Cards : - Megahertz X-Jack Ethernet Misc Info : Default Configuration is good for everything. =========================================================================== LTS ID : 173 Name : Masaki KONUMA (konuma@de.mtex.co.jp) Machine : PC-9821Na12/H10 (CPU Intel Pentium 120MHz (Id=0x52b Stepping=11 Features=0x1bf), HDD 1GB, RAM 23.6MB) FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505 APM BIOS : OK (1.11) PCIC : Cirrus Logic PD672X Cards : - Melco LPC-T irq 3 5 6 10 card "PCMCIA" "UE2212" config default "ed0" 5 0x10 ether 0xff0 00:00:e8 insert echo UE2212 inserted insert /etc/pccard_ether $device remove echo UE2212 card removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 172 Name : Yoshinari Hayato (taichiro@towntv.co.jp) Machine : FUJITSU FMV-5133 NP/W (CPU Pentium 133MHz, HDD 1.3GB, RAM 48MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : TI PCI-1130 CardBus Controller rev 4 Cards : - ACCTON EN-2216 Misc Info : In the previous(quite old?) report, there was a comment that we can't use slot 1. But now both slots are available. =========================================================================== LTS ID : 171 Name : Masamichi HOSODA (trueroad@es.it-chiba.ac.jp) Machine : PC-9801NS/A (CPU Cx486DX2 66MHz (I/O DATA PK-NSA66/C), HDD 500MB, RAM 9.6MB) FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE) Pccard Pkg: PAO-970331, PAO-970331-pc98-970505 PCIC : PC98 Original Cards : - Melco LPC-TS - I/O DATA PCSC-II =========================================================================== LTS ID : 170 Name : Noriyuki KOIZUMI (GBC01623@niftyserve.or.jp) Machine : Toshiba Libretto30 (CPU AMD Am5x86 100MHz, HDD 477MB, RAM 20MB) FreeBSD : OK (2.2-STABLE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_BROKEN_STATCLOCK, APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 (or clones?) Cards : - Adaptec SlimSCSI (APA-1460J) - 3Com 3C589C - Megahertz X-Jack Ethernet CC10BT/2 - Megahertz XJ3288J-PU - NTT Personal Paldio Data Card DC-1P - EPSON Flash Packer 5MB NG-Cards : - =========================================================================== LTS ID : 169 Name : Kouichi ABE (kouichi@etn.yz.yamagata-u.ac.jp) Machine : ThinkPad530CS 1FD (CPU Intel 486DX2/50MHz, HDD 1.3GB (including DOS/Win3.1 120MB), RAM 20(8+12)MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Intel 82365 (or clones) Cards : - 3Com Etherlink III PCMCIA 3C589C-TP =========================================================================== LTS ID : 167 Name : Jacques Garrigue (garrigue@kurims.kyoto-u.ac.jp) Machine : Panasonic Lets's Note AL-N1T515J5 (CPU Pentium 150Mhz, HDD 1.35G (FreeBSD 700M), RAM 48Mbytes) FreeBSD : OK (2.2-970422-RELENG) Pccard Pkg: PAO-970331 for 2.2.1 APM BIOS : OK (1.1) Config Opt: APM_BROKEN_STATCLOCK (did not try without) PCIC : Intel 82365 (or clone) Cards : - TDK LAK-CD021 (Ethernet fe0) NG-Cards : - TAXAN PCS010 (SCSI-2) (with TAXAN ICD-800PW) Misc Info : Install failed with all versions of 2.2.1 (hang at boot). 2.1.7 was OK, but there is a bug in fe0 (using TDK LAC-CD021). Finally I installed 2.2-970422-RELENG. GENERIC works, but not PAO. But adding PAO options in GENERIC worked, so everything is now fine with a custom configuration. =========================================================================== LTS ID : 166 Name : Koshin Sumitani (BXD04075@niftyserve.or.jp) Machine : HP OmniBook 5500 CT (CPU Pentium 133MHz, HDD 2GB, RAM 48MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC_IRQ=9 PCIC : Cirrus Logic PD6729 Cards : - Adaptec SlimSCSI APA-1460A - 3COM Etherlink III 3C589C - EPSON FlashPacker 20MB - Logitec DATA/FAX MODEM CARD LPM-FM336 =========================================================================== LTS ID : 165 Name : Cengiz Alaettinoglu Machine : Micron Millennia Transport (CPU Pentium 133, HDD 2G, RAM 48K) FreeBSD : OK (2.2.1) APM BIOS : OK PCIC : Cirrus Logic Cards : - 3com Etherlink III 3c589D Misc Info : XFree86 that comes w/ FBSD 2.2.1 has broken device drivers for Cirrus Logic GD7548. I installed a newer beta version from www.Xfree86.org =========================================================================== LTS ID : 164 Name : Yuichi Yoda Machine : IBM ThinkPad 535 (2606-KF8) (CPU Pentium 120MHz, HDD IBM DTNA-22160 (2.1GB), RAM 40MB) FreeBSD : OK, No problem (2.2.1-RELEASE) Pccard Pkg: PAO-970331 (installed from bootpao-970425.flp) APM BIOS : OK (probe says "apm: found APM BIOS version 1.1") Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, APM_BROKEN_STATCLOCK PCIC : Cirrus Logic PD6729 Cards : - Adaptec SlimSCSI APA-1460 - TDK DF2814B (Data/Fax Modem /Upgraded to 33600bps) Misc Info : nothing specail =========================================================================== LTS ID : 163 Name : Takeshi UEno (tueno@vio.co.jp) Machine : TOSHIBA Libretto 30 (CPU CPU Am5x86 100MHz, HDD 500MB, RAM 20MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO boot Floppy for 2.2-RELEASE APM BIOS : OK (1.1) PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - APA-1460 Host SCSI Adapter - Allied Telesis Ethernet LAN Adapter - Panasonic TO-CAF288 - NTT DoCoMo PCMCIA DATA/FAX ADAPTER 9600 Mark2 - NTT Personal Paldio Data Card NG-Cards : - NIKON Digital Camera COOLPIX 100 =========================================================================== LTS ID : 162 Name : Nick Sayer (nsayer@quack.kfu.com) Machine : HP Omnibook 5000CTS (CPU Intel Pentium 90Mhz, HDD 1.2MB, RAM 32M) FreeBSD : OK (FreeBSD 2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC : CL PD6729 Cards : - 3C589B - TDK 28.8 (forgot exact model) NG-Cards : - NE4100 - MEGAHERTZ XJ2144 Misc Info : 1. The 50% card success rate is disturbing. The same cards fail under win95, so I am inclined to blame it on hardware. 2. I have gotten the sound to work (it is a CS4232), but it's an ugly hack. =========================================================================== LTS ID : 161 Name : Minoru Horita (horita@osa.dec-j.co.jp) Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - RATOC REX5588 NG-Cards : - MEGASOFT STARFAX CARD288 =========================================================================== LTS ID : 160 Name : Kei TANAKA (kei@pal.xerox.com) Machine : IBM ThinkPad 760ED (CPU Intel Pentium 133MHz, HDD 2.1G, RAM 40M) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP,APM_PCCARD_RESUME,PCIC_RESUME_RESET PCIC : TI PCI-1130 CardBus Controller Cards : - 3Com EtherLink III PCMCIA 3C589C - AT&T WaveLAN/PCMCIA config default "wlp0" any ether wavelan insert echo WaveLAN PCMCIA inserted insert /etc/pccard_ether $device remove echo WaveLAN PCMCIA removed remove /etc/pccard_ether_remove $device Misc Info : PAO-ready boot floppy failed to initialize PC Card driver. With ordinary boot flopy 3C589C can be used as zp0, so I installed FreeBSD using zp0 then installed PAO. But, without following patch PC Card controller was not initialized. zzz(8) fails when pccard is plugged in. *** sys.pao/pccard/pcic.c Fri Mar 28 09:49:11 1997 --- sys/pccard/pcic.c Wed Mar 26 10:57:22 1997 *************** *** 121,128 **** static void pcic_pci_attach(pcici_t config_id, int unit) { ! pcic_pci_ioaddr ! = pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO; pci_conf_write(config_id, 0x04, 0x00ff00ff); } #endif /* NPCI > 0 */ --- 121,130 ---- static void pcic_pci_attach(pcici_t config_id, int unit) { ! if (pcic_pci_id != PCI_DEVICE_ID_PCIC_TI1130_CARDBUS) { ! pcic_pci_ioaddr = ! pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO; ! } pci_conf_write(config_id, 0x04, 0x00ff00ff); } #endif /* NPCI > 0 */ =========================================================================== LTS ID : 159 Name : Gregg Kasten (gregg@cs.stanford.edu) Machine : Toshiba Satellite Pro 400CDT (CPU Pentium 75, HDD 700M, RAM 48M) FreeBSD : Needed to take the "5,11" (non-default) choice for IRQ at PCCard config screen during installation. Also needed to change this in /etc/pccard.conf. (2.2.1-PAO) Pccard Pkg: 970331 APM BIOS : OK (??) PCIC : Intel-compatible (? whatever came with the computer) Cards : - 3COM Etherlink III (3c589b) # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config default "ep0" any insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device # A few days after installation, I switched to the following card: # Linksys Combo PCMCIA Ethernet Card card "LINKSYS" "E-CARD" config default "ed0" any 0x10 insert echo PCMCIA ETHERNET V1.0 inserted insert /etc/pccard_ether $device remove echo PCMCIA ETHERNET V1.0 removed remove /etc/pccard_ether_remove $device Misc Info : I installed FreeBSD over the internet (ftp passive to ftp.freebsd.org) using my 3Com 3c589b PCCard. Using the PCCard default IRQ options ("10,11", if I recall correctly, but I could be wrong), the machine hung after downloading about 100k of the first distribution set. I tried this a few times, and it once got up to around 300k before hanging. In order to get the 3Com card working, I needed to take the "5,11" (non-default) choice for IRQ at PCCard config screen during installation. With this change, the install when flawlessly (and it was FAST!). I also needed to change this in /etc/pccard.conf. A couple days later I replaced the 3Com card with a LinkSys Combo EthernetCard (PCCard). I didn't change the IRQs, so it's still running nicely with the "5,11" IRQ setting in /etc/pccard.conf. =========================================================================== LTS ID : 158 Name : Gregg Kasten (gregg@cs.stanford.edu) Machine : Toshiba Tecra 720CDT (CPU Pentium 133, HDD 2GB, RAM 48M) FreeBSD : OK (2.2.1-PAO) Pccard Pkg: 970331 APM BIOS : OK (??) PCIC : Intel-compatible (? whatever came with the computer) Cards : - 3COM Etherlink III (3c589b) card "3Com Corporation" "3C589" config default "ep0" any insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 157 Name : Kenichi Niioka (Kenichi.Niioka@unisys.co.jp) Machine : Nihon Unisys AQUANTA LN (CPU Pentium 133MHz, HDD IDE 800MB TOSHIBA MK1926FCV, RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 Config Opt: options LAPTOP options "PCIC_MAX_SLOTS=2" options "PCIC_IRQ=11" #device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr PCIC : O2Micro PCI to PCMCIA Bridge (Intel 82365 (or clones)) Cards : - Nihon Unisys JPF0300-ETH Ethernet card #Nihon Unisys card "Nihon Unisys, Ltd." "JPF0400-ETH" configdefault "ed0" 10 ether 0xff0 00:80:45 insert echo Nihon Unisys Ethernet inserted insert /etc/pccard_ether $device remove echo Nihon Unisys Ethernet removed remove /etc/pccard_ether_remove $device =========================================================================== LTS ID : 153 Name : NISHIZUKA Koki (KHE01441@niftyserve.or.jp) Machine : IBM ThinkPad 701C (2630-7TW) (CPU Intel DX4 75MHz, HDD 2GB(TOSHIBA MK2103MAV)(DOS 400MB, FreeBSD 1.6GB), RAM 40MB) FreeBSD : OK (2.2-RELEASE (Mar.16,1997)) Pccard Pkg: PAO-970317 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III PCMCIA 3C589C - Lanned Ethernet Card ELECOM LD-CDWA (MACNICA ME1-JEIDA) - Megahertz XJ10BT - Adaptec SlimSCSI APA-1460 - MACNICA MIRACLE SCSI-II mPS110 - IBM SCSI PCMCIA Card - No Brand 20MB flash ATA card - Epson America Inc. EHDD340 - Maxtor MobileMAX MXL171 - INTEGRAL PERIPHERALS Viper 260 (8260PA) - INTEGRAL PERIPHERALS Viper 340 (8340PA) - GREYSTONE PERIPHERALS DiskDock(PCMCIA to IDE Interface) - Simple Technology SimpleJack Modem 28.8 Communicatator - IBM Push Pop Modem - IBM Double Jack Modem - IBM Smart Capture Card II =========================================================================== LTS ID : 150 Name : HIGAKI, Masakazu (higaki@umi.hq.kishou.go.jp) Machine : TOSHIBA DynaBook SS475 (CPU DX4 75MHz, HDD 500MB (FreeBSD 300MB, DOS/Win 200MB), RAM 24MB) FreeBSD : OK (2.2-RELEASE) Pccard Pkg: PAO-970317 APM BIOS : OK (1.0 compatible mode) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, APM_NOSUSPEND_IMMIDIATE=3, APM_BROKEN_STATCLOCK PCIC : Intel 82365 Cards : - 3Com EtherLink III 3C589B ===========================================================================